From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Rong Zhang <i@rong.moe>
Cc: "Lee Jones" <lee@kernel.org>, "Pavel Machek" <pavel@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
"Thomas Weißschuh" <linux@weissschuh.net>,
"Benson Leung" <bleung@chromium.org>,
"Guenter Roeck" <groeck@chromium.org>,
"Marek Behún" <kabel@kernel.org>,
"Mark Pearson" <mpearson-lenovo@squebb.ca>,
"Derek J. Clark" <derekjohn.clark@gmail.com>,
"Hans de Goede" <hansg@kernel.org>,
"Ike Panhc" <ikepanhc@gmail.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Vishnu Sankar" <vishnuocv@gmail.com>,
"Vishnu Sankar" <vsankar@lenovo.com>,
linux-leds@vger.kernel.org, Netdev <netdev@vger.kernel.org>,
linux-doc@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
chrome-platform@lists.linux.dev,
platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH RFC v3 11/11] platform/x86: ideapad-laptop: Fully support auto keyboard backlight
Date: Tue, 21 Jul 2026 20:14:50 +0300 (EEST) [thread overview]
Message-ID: <e4d81cf2-a44d-bcdb-1bc9-f5847b447984@linux.intel.com> (raw)
In-Reply-To: <20260719-leds-trigger-hw-changed-v3-11-5fb55722e36e@rong.moe>
On Sun, 19 Jul 2026, Rong Zhang wrote:
> Currently, the auto brightness mode of keyboard backlight maps to
> brightness=0 in LED classdev. The only method to switch to such a mode
> is by pressing the manufacturer-defined shortcut (Fn+Space). However, 0
> is a multiplexed brightness value; writing 0 simply results in the
> backlight being turned off.
>
> With brightness processing code decoupled from LED classdev, we can now
> fully support the auto brightness mode. In this mode, the keyboard
> backlight is controlled by the EC according to the ambient light sensor
> (ALS).
>
> To utilize this, a private hardware control trigger "ideapad-auto" is
> added, with the event handling procedure calling the
> led_trigger_notify_hw_control_changed() interface to activate/deactivate
> the private trigger according to the current LED trigger state.
>
> Meanwhile, block brightness changes on exit to prevent the side effect
> of LED device unregistration when the private trigger is active from
> resetting the brightness to zero, so that we can retain the state of
> auto mode among boots.
>
> Signed-off-by: Rong Zhang <i@rong.moe>
> ---
> Changes in v3:
> - Address concerns from Sashiko
> - Fix a race condition in ideapad_kbd_bl_led_cdev_brightness_set()
> - Fix trigger re-registration of ideapad_kbd_bl_auto_trigger
> - https://sashiko.dev/#/patchset/20260618-leds-trigger-hw-changed-v2-0-c28c44053cf3%40rong.moe
> - Make registration failures of ideapad_kbd_bl_auto_trigger non-fatal
> ---
> drivers/platform/x86/lenovo/ideapad-laptop.c | 112 ++++++++++++++++++++++++---
> 1 file changed, 103 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/platform/x86/lenovo/ideapad-laptop.c b/drivers/platform/x86/lenovo/ideapad-laptop.c
> index 66e16abda5e3..253d2962b927 100644
> --- a/drivers/platform/x86/lenovo/ideapad-laptop.c
> +++ b/drivers/platform/x86/lenovo/ideapad-laptop.c
> @@ -1714,9 +1714,58 @@ static int ideapad_kbd_bl_led_cdev_brightness_set(struct led_classdev *led_cdev,
> {
> struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led);
>
> + /*
> + * When deinitializing: It must be the side effect of led_cdev
> + * unregistration when our private trigger is active. We've set
> + * LED_RETAIN_AT_SHUTDOWN to retain led_cdev brightness level.
> + * To do the same for auto mode, gate changes and return early.
> + */
> + if (unlikely(!priv->kbd_bl.initialized))
This too would need include, but I think addressing some earlier include
request will cover it.
> + return 0;
> +
> return ideapad_kbd_bl_brightness_set(priv, brightness);
> }
>
> +static bool ideapad_kbd_bl_auto_trigger_offloaded(struct led_classdev *led_cdev)
> +{
> + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led);
Add include for container_of().
> +
> + return atomic_read(&priv->kbd_bl.last_hw_brightness) == KBD_BL_AUTO_MODE_HW_BRIGHTNESS;
> +}
> +
> +static int ideapad_kbd_bl_auto_trigger_activate(struct led_classdev *led_cdev)
> +{
> + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led);
> +
> + return ideapad_kbd_bl_hw_brightness_set(priv, KBD_BL_AUTO_MODE_HW_BRIGHTNESS);
> +}
> +
> +static struct led_hw_trigger_type ideapad_kbd_bl_auto_trigger_type;
> +
> +static struct led_trigger ideapad_kbd_bl_auto_trigger = {
> + .name = "ideapad-auto",
> + .trigger_type = &ideapad_kbd_bl_auto_trigger_type,
> + .activate = ideapad_kbd_bl_auto_trigger_activate,
> + .offloaded = ideapad_kbd_bl_auto_trigger_offloaded,
> +};
> +
> +static bool ideapad_kbd_bl_auto_trigger_registered;
> +
> +static void ideapad_kbd_bl_notify_hw_control(struct ideapad_private *priv,
> + int hw_brightness, int last_hw_brightness)
> +{
> + bool hw_control, last_hw_control;
> +
> + if (priv->kbd_bl.type != KBD_BL_TRISTATE_AUTO)
> + return;
> +
> + hw_control = hw_brightness == KBD_BL_AUTO_MODE_HW_BRIGHTNESS;
> + last_hw_control = last_hw_brightness == KBD_BL_AUTO_MODE_HW_BRIGHTNESS;
> +
> + if (hw_control != last_hw_control)
> + led_trigger_notify_hw_control_changed(&priv->kbd_bl.led, hw_control);
> +}
> +
> static void ideapad_kbd_bl_notify(struct ideapad_private *priv)
> {
> int hw_brightness, brightness, last_hw_brightness;
> @@ -1738,6 +1787,8 @@ static void ideapad_kbd_bl_notify(struct ideapad_private *priv)
> if (hw_brightness == last_hw_brightness)
> return;
>
> + ideapad_kbd_bl_notify_hw_control(priv, hw_brightness, last_hw_brightness);
> +
> led_classdev_notify_brightness_hw_changed(&priv->kbd_bl.led, brightness);
> }
>
> @@ -1768,6 +1819,24 @@ static int ideapad_kbd_bl_init(struct ideapad_private *priv)
>
> switch (priv->kbd_bl.type) {
> case KBD_BL_TRISTATE_AUTO:
> + priv->kbd_bl.led.max_brightness = 2;
> +
> + if (!ideapad_kbd_bl_auto_trigger_registered) {
> + dev_warn(&priv->platform_device->dev,
> + "Could not provide LED trigger %s for keyboard backlight\n",
> + ideapad_kbd_bl_auto_trigger.name);
> + break;
> + }
> +
> + priv->kbd_bl.led.flags |= LED_TRIG_HW_CHANGED;
> + priv->kbd_bl.led.hw_control_trigger = ideapad_kbd_bl_auto_trigger.name;
> + priv->kbd_bl.led.trigger_type = &ideapad_kbd_bl_auto_trigger_type;
I'm skeptical aligning makes things better here.
> +
> + /* Hardware remembers the last brightness level, including auto mode. */
> + if (hw_brightness == KBD_BL_AUTO_MODE_HW_BRIGHTNESS)
> + priv->kbd_bl.led.default_trigger = ideapad_kbd_bl_auto_trigger.name;
> +
> + break;
> case KBD_BL_TRISTATE:
> priv->kbd_bl.led.max_brightness = 2;
> break;
> @@ -1779,13 +1848,22 @@ static int ideapad_kbd_bl_init(struct ideapad_private *priv)
> unreachable();
> }
>
> - err = led_classdev_register(&priv->platform_device->dev, &priv->kbd_bl.led);
> - if (err)
> - return err;
> + /* Queue notifications, as kbd_bl.initialized is about to be set. */
> + guard(mutex)(&priv->kbd_bl.notif_mutex);
>
> + /*
> + * Setting kbd_bl.initialized after led_classdev_register() could lead
> + * to race conditions in ideapad_kbd_bl_led_cdev_brightness_set() where
> + * kbd_bl.initialized is checked, so set it now. It can be reverted back
> + * if the LED classdev failed to register.
> + */
> priv->kbd_bl.initialized = true;
>
> - return 0;
> + err = led_classdev_register(&priv->platform_device->dev, &priv->kbd_bl.led);
> + if (err)
> + priv->kbd_bl.initialized = false;
> +
> + return err;
> }
>
> static void ideapad_kbd_bl_exit(struct ideapad_private *priv)
> @@ -2612,17 +2690,30 @@ static int __init ideapad_laptop_init(void)
> {
> int err;
>
> + err = led_trigger_register(&ideapad_kbd_bl_auto_trigger);
> + if (err) {
> + pr_warn("Failed to register LED trigger %s: %d\n",
include missing.
> + ideapad_kbd_bl_auto_trigger.name, err);
> + } else {
> + ideapad_kbd_bl_auto_trigger_registered = true;
> + }
> +
> err = ideapad_wmi_driver_register();
> if (err)
> - return err;
> + goto err_ledtrig;
>
> err = platform_driver_register(&ideapad_acpi_driver);
> - if (err) {
> - ideapad_wmi_driver_unregister();
> - return err;
> - }
> + if (err)
> + goto err_wmi;
>
> return 0;
> +
> +err_wmi:
> + ideapad_wmi_driver_unregister();
> +err_ledtrig:
> + if (ideapad_kbd_bl_auto_trigger_registered)
> + led_trigger_unregister(&ideapad_kbd_bl_auto_trigger);
> + return err;
> }
> module_init(ideapad_laptop_init)
>
> @@ -2630,6 +2721,9 @@ static void __exit ideapad_laptop_exit(void)
> {
> ideapad_wmi_driver_unregister();
> platform_driver_unregister(&ideapad_acpi_driver);
Why is the order not the reverse of the init order?
> +
> + if (ideapad_kbd_bl_auto_trigger_registered)
> + led_trigger_unregister(&ideapad_kbd_bl_auto_trigger);
> }
> module_exit(ideapad_laptop_exit)
>
>
>
--
i.
next prev parent reply other threads:[~2026-07-21 17:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-18 17:05 [PATCH RFC v3 00/11] leds: Add support for hardware-initiated hardware control trigger transition Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 01/11] leds: Move led_trigger_is_hw_controlled() to the right place Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 02/11] leds: class: Remove hardware control trigger when writing brightness Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 03/11] leds: trigger: Add offloaded() callback and provide trigger_may_offload attribute Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 04/11] leds: cros_ec: trigger: Implement offloaded() callback Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 05/11] leds: turris-omnia: trigger: Implement offloaded() and declare hw_control_trigger Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 06/11] leds: trigger: netdev: Implement offloaded() callback Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 07/11] leds: trigger: Enforce strict checks in led_trigger_is_hw_controlled() Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 08/11] leds: trigger: Add led_trigger_notify_hw_control_changed() interface Rong Zhang
2026-07-18 17:05 ` [PATCH RFC v3 09/11] platform/x86: ideapad-laptop: Decouple hardware & classdev brightness for keyboard backlight Rong Zhang
2026-07-21 17:08 ` Ilpo Järvinen
2026-07-18 17:05 ` [PATCH RFC v3 10/11] platform/x86: ideapad-laptop: Serialize keyboard backlight notifications Rong Zhang
2026-07-21 17:09 ` Ilpo Järvinen
2026-07-18 17:05 ` [PATCH RFC v3 11/11] platform/x86: ideapad-laptop: Fully support auto keyboard backlight Rong Zhang
2026-07-21 17:14 ` Ilpo Järvinen [this message]
2026-07-21 18:25 ` Rong Zhang
2026-07-22 8:08 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e4d81cf2-a44d-bcdb-1bc9-f5847b447984@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=bleung@chromium.org \
--cc=chrome-platform@lists.linux.dev \
--cc=corbet@lwn.net \
--cc=derekjohn.clark@gmail.com \
--cc=groeck@chromium.org \
--cc=hansg@kernel.org \
--cc=i@rong.moe \
--cc=ikepanhc@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=lee@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux@weissschuh.net \
--cc=mpearson-lenovo@squebb.ca \
--cc=netdev@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=vishnuocv@gmail.com \
--cc=vsankar@lenovo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox