Linux EDAC development
 help / color / mirror / Atom feed
From: Keith Mannthey <kmannth@us.ibm.com>
To: "Prasanna S. Panchamukhi" <prasanna.panchamukhi@riverbed.com>
Cc: Rob.Becker@riverbed.com, bluesmoke-devel@lists.sourceforge.net,
	Arthur.Jones@riverbed.com, dougthompson@xmission.com
Subject: Re: EDAC linux-2.6.34-rc5 non correctable errors not reported on AMD64 opteron
Date: Thu, 29 Apr 2010 15:13:42 -0700	[thread overview]
Message-ID: <1272579222.3792.18.camel@keith-laptop> (raw)
In-Reply-To: <20100429183003.GB20328@ppanchamukhi>

On Thu, 2010-04-29 at 11:30 -0700, Prasanna S. Panchamukhi wrote:
> Hi Doug,
> 
> I am testing Linux-2.6.34-rc5 EDAC driver on AMD64 Opteron.
> I am able to inject single bit errors and get the edac driver report the 
> correctable errors.
> But when I inject 2-bit errors, I did not see any notification or kernel 
> log, the system simply hangs.
> This happens with or without edac_mc_panic_on_ue enabled.
> Please let me know if I am missing something.
> Below are the details.

I would have to recheck the specs to be 100% sure but I would consider
double bit errors to be fatal on normal Opteron boxes. There is a good
chance your BIOS detects the fatal error and freezes the box to prevent
data corruption.

Thanks,
  Keith 

> Thanks
> Prasanna
> 
> Steps to reproduce the problem:
> 
> 
> 1. Build Linux-2.6.34-rc5 using x86_64_defconfig with following additional config options enabled:
> CONFIG_EDAC_DECODE_MCE=y
> CONFIG_EDAC_MM_EDAC=y
> CONFIG_EDAC_AMD64=m
> CONFIG_EDAC_AMD64_ERROR_INJECTION=y
> CONFIG_EDAC_E752X=m
> CONFIG_EDAC_I82975X=m
> CONFIG_EDAC_I3000=m
> CONFIG_EDAC_I3200=m
> CONFIG_EDAC_X38=m
> CONFIG_EDAC_I5400=m
> CONFIG_EDAC_I5000=m
> CONFIG_EDAC_I5100=m
> 
> 2. insert the kernel module
> #insmod amd64_edac_mod.ko
> 
> 3. Inject errors
> 
> # echo 3 > /sys/devices/system/edac/mc/mc0/inject_section  
> # echo 7 > /sys/devices/system/edac/mc/mc0/inject_word
> # echo 0x88 > /sys/devices/system/edac/mc/mc0/inject_ecc_vector
> # echo 1 > /sys/devices/system/edac/mc/mc0/inject_read
> # echo 1 > /sys/devices/system/edac/mc/mc0/inject_write
> 
> 4. Should hang the system in few minutes.
> 
> Additional info:
> - AMD64 opteron
> # cat /proc/cpuinfo
> processor    : 0
> vendor_id    : AuthenticAMD
> cpu family   : 16
> model          : 2
> model name    : Quad-Core AMD Opteron(tm) Processor 2346 HE
> stepping       : 3
> cpu MHz      : 1800.023
> cache size    : 512 KB
> physical id   : 0
> siblings       : 4
> core id        : 0
> cpu cores    : 4
> apicid          : 0
> initial apicid    : 0
> fpu        : yes
> fpu_exception    : yes
> cpuid level    : 5
> wp        : yes
> flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt 
> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc 
> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic 
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
> bogomips    : 3600.04
> TLB size    : 1024 4K pages
> clflush size    : 64
> cache_alignment    : 64
> address sizes    : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
> 
> processor    : 1
> vendor_id    : AuthenticAMD
> cpu family    : 16
> model        : 2
> model name    : Quad-Core AMD Opteron(tm) Processor 2346 HE
> stepping    : 3
> cpu MHz        : 1800.023
> cache size    : 512 KB
> physical id    : 0
> siblings    : 4
> core id        : 1
> cpu cores    : 4
> apicid        : 1
> initial apicid    : 1
> fpu        : yes
> fpu_exception    : yes
> cpuid level    : 5
> wp        : yes
> flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt 
> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc 
> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic 
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
> bogomips    : 3600.08
> TLB size    : 1024 4K pages
> clflush size    : 64
> cache_alignment    : 64
> address sizes    : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
> 
> processor    : 2
> vendor_id    : AuthenticAMD
> cpu family    : 16
> model        : 2
> model name    : Quad-Core AMD Opteron(tm) Processor 2346 HE
> stepping    : 3
> cpu MHz        : 1800.023
> cache size    : 512 KB
> physical id    : 0
> siblings    : 4
> core id        : 2
> cpu cores    : 4
> apicid        : 2
> initial apicid    : 2
> fpu        : yes
> fpu_exception    : yes
> cpuid level    : 5
> wp        : yes
> flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt 
> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc 
> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic 
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
> bogomips    : 3599.96
> TLB size    : 1024 4K pages
> clflush size    : 64
> cache_alignment    : 64
> address sizes    : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
> 
> processor    : 3
> vendor_id    : AuthenticAMD
> cpu family    : 16
> model        : 2
> model name    : Quad-Core AMD Opteron(tm) Processor 2346 HE
> stepping    : 3
> cpu MHz        : 1800.023
> cache size    : 512 KB
> physical id    : 0
> siblings    : 4
> core id        : 3
> cpu cores    : 4
> apicid        : 3
> initial apicid    : 3
> fpu        : yes
> fpu_exception    : yes
> cpuid level    : 5
> wp        : yes
> flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
> cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt 
> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc 
> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic 
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
> bogomips    : 3600.01
> TLB size    : 1024 4K pages
> clflush size    : 64
> cache_alignment    : 64
> address sizes    : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
> 
> 
> 
> 
> ------------------------------------------------------------------------------
> _______________________________________________
> bluesmoke-devel mailing list
> bluesmoke-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluesmoke-devel


------------------------------------------------------------------------------

  reply	other threads:[~2010-04-29 22:13 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-29 18:30 EDAC linux-2.6.34-rc5 non correctable errors not reported on AMD64 opteron Prasanna S. Panchamukhi
2010-04-29 22:13 ` Keith Mannthey [this message]
2010-04-29 22:31   ` Prasanna S. Panchamukhi
2010-04-29 23:18     ` Keith Mannthey
2010-04-30  0:12       ` Prasanna S. Panchamukhi
2010-04-30  0:38         ` Keith Mannthey
2010-04-30 11:00           ` Borislav Petkov
2010-05-05  1:40             ` Prasanna S. Panchamukhi
2010-05-06 23:56             ` Prasanna S. Panchamukhi
2010-04-30 14:08         ` Ben Woodard
  -- strict thread matches above, loose matches on Subject: below --
2010-04-28 17:14 EDAC: Linux-2.6.34-rc5 non correctable errors not reported on AMD64 Opteron Prasanna Panchamukhi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1272579222.3792.18.camel@keith-laptop \
    --to=kmannth@us.ibm.com \
    --cc=Arthur.Jones@riverbed.com \
    --cc=Rob.Becker@riverbed.com \
    --cc=bluesmoke-devel@lists.sourceforge.net \
    --cc=dougthompson@xmission.com \
    --cc=prasanna.panchamukhi@riverbed.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox