Linux EDAC development
 help / color / mirror / Atom feed
From: "Luck, Tony" <tony.luck@intel.com>
To: Borislav Petkov <bp@alien8.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>,
	Aristeu Rozanski <aris@redhat.com>,
	Mauro Carvalho Chehab <mchehab@s-opensource.com>,
	linux-edac@vger.kernel.org
Subject: [V2,1/2] x86/mce: Use BIT_ULL(x) for bit mask definitions
Date: Mon, 24 Sep 2018 17:01:27 -0700	[thread overview]
Message-ID: <20180925000127.GA5998@agluck-desk> (raw)

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

Current coding style is to use the BIT_ULL() macro

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---

V2: rolled in the vertical aligment changes from part2 into part1

 arch/x86/include/asm/mce.h | 50 +++++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 3a17107594c8..37b29e841757 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -10,41 +10,41 @@
 
 /* MCG_CAP register defines */
 #define MCG_BANKCNT_MASK	0xff         /* Number of Banks */
-#define MCG_CTL_P		(1ULL<<8)    /* MCG_CTL register available */
-#define MCG_EXT_P		(1ULL<<9)    /* Extended registers available */
-#define MCG_CMCI_P		(1ULL<<10)   /* CMCI supported */
+#define MCG_CTL_P		BIT_ULL(8)   /* MCG_CTL register available */
+#define MCG_EXT_P		BIT_ULL(9)   /* Extended registers available */
+#define MCG_CMCI_P		BIT_ULL(10)  /* CMCI supported */
 #define MCG_EXT_CNT_MASK	0xff0000     /* Number of Extended registers */
 #define MCG_EXT_CNT_SHIFT	16
 #define MCG_EXT_CNT(c)		(((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
-#define MCG_SER_P		(1ULL<<24)   /* MCA recovery/new status bits */
-#define MCG_ELOG_P		(1ULL<<26)   /* Extended error log supported */
-#define MCG_LMCE_P		(1ULL<<27)   /* Local machine check supported */
+#define MCG_SER_P		BIT_ULL(24)  /* MCA recovery/new status bits */
+#define MCG_ELOG_P		BIT_ULL(26)  /* Extended error log supported */
+#define MCG_LMCE_P		BIT_ULL(27)  /* Local machine check supported */
 
 /* MCG_STATUS register defines */
-#define MCG_STATUS_RIPV  (1ULL<<0)   /* restart ip valid */
-#define MCG_STATUS_EIPV  (1ULL<<1)   /* ip points to correct instruction */
-#define MCG_STATUS_MCIP  (1ULL<<2)   /* machine check in progress */
-#define MCG_STATUS_LMCES (1ULL<<3)   /* LMCE signaled */
+#define MCG_STATUS_RIPV  BIT_ULL(0)   /* restart ip valid */
+#define MCG_STATUS_EIPV  BIT_ULL(1)   /* ip points to correct instruction */
+#define MCG_STATUS_MCIP  BIT_ULL(2)   /* machine check in progress */
+#define MCG_STATUS_LMCES BIT_ULL(3)   /* LMCE signaled */
 
 /* MCG_EXT_CTL register defines */
-#define MCG_EXT_CTL_LMCE_EN (1ULL<<0) /* Enable LMCE */
+#define MCG_EXT_CTL_LMCE_EN BIT_ULL(0) /* Enable LMCE */
 
 /* MCi_STATUS register defines */
-#define MCI_STATUS_VAL   (1ULL<<63)  /* valid error */
-#define MCI_STATUS_OVER  (1ULL<<62)  /* previous errors lost */
-#define MCI_STATUS_UC    (1ULL<<61)  /* uncorrected error */
-#define MCI_STATUS_EN    (1ULL<<60)  /* error enabled */
-#define MCI_STATUS_MISCV (1ULL<<59)  /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1ULL<<58)  /* addr reg. valid */
-#define MCI_STATUS_PCC   (1ULL<<57)  /* processor context corrupt */
-#define MCI_STATUS_S	 (1ULL<<56)  /* Signaled machine check */
-#define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
+#define MCI_STATUS_VAL		BIT_ULL(63)  /* valid error */
+#define MCI_STATUS_OVER		BIT_ULL(62)  /* previous errors lost */
+#define MCI_STATUS_UC		BIT_ULL(61)  /* uncorrected error */
+#define MCI_STATUS_EN		BIT_ULL(60)  /* error enabled */
+#define MCI_STATUS_MISCV	BIT_ULL(59)  /* misc error reg. valid */
+#define MCI_STATUS_ADDRV	BIT_ULL(58)  /* addr reg. valid */
+#define MCI_STATUS_PCC		BIT_ULL(57)  /* processor context corrupt */
+#define MCI_STATUS_S		BIT_ULL(56)  /* Signaled machine check */
+#define MCI_STATUS_AR		BIT_ULL(55)  /* Action required */
 
 /* AMD-specific bits */
-#define MCI_STATUS_TCC		(1ULL<<55)  /* Task context corrupt */
-#define MCI_STATUS_SYNDV	(1ULL<<53)  /* synd reg. valid */
-#define MCI_STATUS_DEFERRED	(1ULL<<44)  /* uncorrected error, deferred exception */
-#define MCI_STATUS_POISON	(1ULL<<43)  /* access poisonous data */
+#define MCI_STATUS_TCC		BIT_ULL(55)  /* Task context corrupt */
+#define MCI_STATUS_SYNDV	BIT_ULL(53)  /* synd reg. valid */
+#define MCI_STATUS_DEFERRED	BIT_ULL(44)  /* uncorrected error, deferred exception */
+#define MCI_STATUS_POISON	BIT_ULL(43)  /* access poisonous data */
 
 /*
  * McaX field if set indicates a given bank supports MCA extensions:
@@ -84,7 +84,7 @@
 #define  MCI_MISC_ADDR_GENERIC	7	/* generic */
 
 /* CTL2 register defines */
-#define MCI_CTL2_CMCI_EN		(1ULL << 30)
+#define MCI_CTL2_CMCI_EN		BIT_ULL(30)
 #define MCI_CTL2_CMCI_THRESHOLD_MASK	0x7fffULL
 
 #define MCJ_CTX_MASK		3

                 reply	other threads:[~2018-09-25  0:01 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180925000127.GA5998@agluck-desk \
    --to=tony.luck@intel.com \
    --cc=aris@redhat.com \
    --cc=bp@alien8.de \
    --cc=linux-edac@vger.kernel.org \
    --cc=mchehab@s-opensource.com \
    --cc=qiuxu.zhuo@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox