EDAC, i7core/sb_edac/skx_edac: Fix uncorrected error counting

[Borislav Petkov <bp@alien8.de>]

On Fri, Sep 28, 2018 at 02:39:34PM -0700, Tony Luck wrote:
> We pick up the count of errors from bits 52:38 of the machine
> check bank status register. But this is the count of *corrected*
> errors. If we are logging an uncorrected error, the h/w set this
> field to 0. Which means that when we call into edac_mc_handle_error()
> the EDAC core will carefully add zero to the appropriate uncorrected
> error counts.
> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Tony Luck <tony.luck@intel.com>
> ---
> 
> So I was digging around in /sys/devices/system/edac/mc/mc*/* and noticed
> the the "ue_count" files all read "0" even after injecting and recovering
> from some 2-bit error.
> 
>  drivers/edac/i7core_edac.c | 1 +
>  drivers/edac/sb_edac.c     | 1 +
>  drivers/edac/skx_edac.c    | 1 +
>  3 files changed, 3 insertions(+)

Applied, thanks.