From: Yazen Ghannam <yazen.ghannam@amd.com>
To: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"bp@alien8.de" <bp@alien8.de>
Subject: [v2,3/6] EDAC/amd64: Use a macro for iterating over Unified Memory Controllers
Date: Tue, 26 Feb 2019 17:25:46 +0000 [thread overview]
Message-ID: <20190226172532.12924-3-Yazen.Ghannam@amd.com> (raw)
From: Yazen Ghannam <yazen.ghannam@amd.com>
Define and use a macro for looping over the number of Unified Memory
Controllers.
No functional change.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
Link:
https://lkml.kernel.org/r/20190219202536.15462-2-Yazen.Ghannam@amd.com
v1->v2:
* New in V2. Please see comment on Patch 2 V1 at link above.
drivers/edac/amd64_edac.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 0038fcb0b010..c82aafb7246a 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -449,6 +449,9 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct,
#define for_each_chip_select_mask(i, dct, pvt) \
for (i = 0; i < pvt->csels[dct].m_cnt; i++)
+#define for_each_umc(i) \
+ for (i = 0; i < num_umcs; i++)
+
/*
* @input_addr is an InputAddr associated with the node given by mci. Return the
* csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr).
@@ -722,7 +725,7 @@ static unsigned long determine_edac_cap(struct amd64_pvt *pvt)
if (pvt->umc) {
u8 i, umc_en_mask = 0, dimm_ecc_en_mask = 0;
- for (i = 0; i < num_umcs; i++) {
+ for_each_umc(i) {
if (!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT))
continue;
@@ -811,7 +814,7 @@ static void __dump_misc_regs_df(struct amd64_pvt *pvt)
struct amd64_umc *umc;
u32 i, tmp, umc_base;
- for (i = 0; i < num_umcs; i++) {
+ for_each_umc(i) {
umc_base = get_umc_base(i);
umc = &pvt->umc[i];
@@ -1388,7 +1391,7 @@ static int f17_early_channel_count(struct amd64_pvt *pvt)
int i, channels = 0;
/* SDP Control bit 31 (SdpInit) is clear for unused UMC channels */
- for (i = 0; i < num_umcs; i++)
+ for_each_umc(i)
channels += !!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT);
amd64_info("MCT channel count: %d\n", channels);
@@ -2604,7 +2607,7 @@ static void determine_ecc_sym_sz(struct amd64_pvt *pvt)
if (pvt->umc) {
u8 i;
- for (i = 0; i < num_umcs; i++) {
+ for_each_umc(i) {
/* Check enabled channels only: */
if ((pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) &&
(pvt->umc[i].ecc_ctrl & BIT(7))) {
@@ -2640,7 +2643,7 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt)
u32 i, umc_base;
/* Read registers from each UMC */
- for (i = 0; i < num_umcs; i++) {
+ for_each_umc(i) {
umc_base = get_umc_base(i);
umc = &pvt->umc[i];
@@ -3053,7 +3056,7 @@ static bool ecc_enabled(struct pci_dev *F3, u16 nid)
if (boot_cpu_data.x86 >= 0x17) {
u8 umc_en_mask = 0, ecc_en_mask = 0;
- for (i = 0; i < num_umcs; i++) {
+ for_each_umc(i) {
u32 base = get_umc_base(i);
/* Only check enabled UMCs. */
@@ -3106,7 +3109,7 @@ f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt)
{
u8 i, ecc_en = 1, cpk_en = 1;
- for (i = 0; i < num_umcs; i++) {
+ for_each_umc(i) {
if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) {
ecc_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_ENABLED);
cpk_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_CHIPKILL_CAP);
next reply other threads:[~2019-02-26 17:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-26 17:25 Yazen Ghannam [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-02-26 21:53 [v2,3/6] EDAC/amd64: Use a macro for iterating over Unified Memory Controllers Borislav Petkov
2019-02-27 14:50 Yazen Ghannam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190226172532.12924-3-Yazen.Ghannam@amd.com \
--to=yazen.ghannam@amd.com \
--cc=bp@alien8.de \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox