From: Borislav Petkov <bp@alien8.de>
To: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org, linux-edac@vger.kernel.org,
Saar Amar <Saar.Amar@microsoft.com>,
"security@kernel.org" <security@kernel.org>
Subject: [PATCH] x86/mce/amd: Publish the bank pointer only after setup has succeeded
Date: Fri, 14 Feb 2020 09:37:23 +0100 [thread overview]
Message-ID: <20200214083723.GB13395@zn.tnic> (raw)
In-Reply-To: <20200204133638.GA19863@zn.tnic>
Now as a proper, tested patch:
---
From: Borislav Petkov <bp@suse.de>
threshold_create_bank() creates a bank descriptor per MCA error
thresholding counter which can be controlled over sysfs. It publishes
the pointer to that bank in a per-CPU variable and then goes on to
create additional thresholding blocks if the bank has such.
However, that creation of additional blocks in
allocate_threshold_blocks() can fail, leading to a use-after-free
through the per-CPU pointer.
Therefore, publish that pointer only after all blocks have been setup
successfully.
Fixes: 019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor")
Reported-by: Saar Amar <Saar.Amar@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200128140846.phctkvx5btiexvbx@kili.mountain
---
arch/x86/kernel/cpu/mce/amd.c | 33 ++++++++++++++++-----------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index b3a50d962851..e7313e5c497c 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -1198,8 +1198,9 @@ static const char *get_name(unsigned int bank, struct threshold_block *b)
return buf_mcatype;
}
-static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
- unsigned int block, u32 address)
+static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb,
+ unsigned int bank, unsigned int block,
+ u32 address)
{
struct threshold_block *b = NULL;
u32 low, high;
@@ -1243,16 +1244,12 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
INIT_LIST_HEAD(&b->miscj);
- if (per_cpu(threshold_banks, cpu)[bank]->blocks) {
- list_add(&b->miscj,
- &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj);
- } else {
- per_cpu(threshold_banks, cpu)[bank]->blocks = b;
- }
+ if (tb->blocks)
+ list_add(&b->miscj, &tb->blocks->miscj);
+ else
+ tb->blocks = b;
- err = kobject_init_and_add(&b->kobj, &threshold_ktype,
- per_cpu(threshold_banks, cpu)[bank]->kobj,
- get_name(bank, b));
+ err = kobject_init_and_add(&b->kobj, &threshold_ktype, tb->kobj, get_name(bank, b));
if (err)
goto out_free;
recurse:
@@ -1260,7 +1257,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
if (!address)
return 0;
- err = allocate_threshold_blocks(cpu, bank, block, address);
+ err = allocate_threshold_blocks(cpu, tb, bank, block, address);
if (err)
goto out_free;
@@ -1345,8 +1342,6 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
goto out_free;
}
- per_cpu(threshold_banks, cpu)[bank] = b;
-
if (is_shared_bank(bank)) {
refcount_set(&b->cpus, 1);
@@ -1357,9 +1352,13 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
}
}
- err = allocate_threshold_blocks(cpu, bank, 0, msr_ops.misc(bank));
- if (!err)
- goto out;
+ err = allocate_threshold_blocks(cpu, b, bank, 0, msr_ops.misc(bank));
+ if (err)
+ goto out_free;
+
+ per_cpu(threshold_banks, cpu)[bank] = b;
+
+ return 0;
out_free:
kfree(b);
--
2.21.0
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
prev parent reply other threads:[~2020-02-14 8:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190813100752.GM1935@kadam>
2020-01-28 14:09 ` [PATCH] x86/MCE/AMD: Fix use after free in error handling Dan Carpenter
2020-01-28 14:12 ` [EXTERNAL] " Saar Amar
2020-01-28 15:59 ` Saar Amar
2020-01-28 16:15 ` Dan Carpenter
2020-02-04 13:36 ` Borislav Petkov
2020-02-14 8:37 ` Borislav Petkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214083723.GB13395@zn.tnic \
--to=bp@alien8.de \
--cc=Saar.Amar@microsoft.com \
--cc=dan.carpenter@oracle.com \
--cc=hpa@zytor.com \
--cc=linux-edac@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=security@kernel.org \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox