From: Serge Semin <fancer.lancer@gmail.com>
To: Michal Simek <michal.simek@amd.com>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
Borislav Petkov <bp@alien8.de>, Tony Luck <tony.luck@intel.com>,
James Morse <james.morse@arm.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Robert Richter <rric@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>,
Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@xilinx.com>,
Dinh Nguyen <dinguyen@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-arm-kernel@lists.infradead.org, linux-edac@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 12/18] EDAC/synopsys: Read full data+ecc pattern on errors
Date: Wed, 20 Sep 2023 22:26:57 +0300 [thread overview]
Message-ID: <20230920192806.29960-13-fancer.lancer@gmail.com> (raw)
In-Reply-To: <20230920192806.29960-1-fancer.lancer@gmail.com>
DW uMCTL2 DDRC calculates ECC for the Full DQ-bus word. If non-Full bus
width mode is activated the leftover DQ-bits will be padded with zeros,
but the ECC code is calculated for the whole width anyway [1]. For some
reason the DW uMCTL2 DDRC driver currently doesn't read the whole SDRAM
word in if ECC errors happens even though the 64-bits DQ-bus has been
supported for a long time. Moreover a Full ECC value is also available in
the ECC(C|U)SYN2 register. In a less than 64-bits DQ-bus setups the higher
ECC bits are just unused.
So update the errors handler to reading the entire data+ecc pattern:
extend the data field of the ECC error info structure since it may contain
64-bit data; add a new ECC field there since it's a part of the erroneous
data pattern; read the upper 32-bits part of the data pattern only if an
ECC error happens and the DDR controller has been configured with the
64-bits DQ bus; read the full ECC value from the ECC(C|U)SYN2 register.
The data+ecc couple will be printed as a part of the custom error message
passed then to the edac_mc_handle_error() method.
Note since the full data+ecc info is now always logged into the EDAC core
there is no longer need in the debug print of the Syndrome Registers
content. Drop it then.
[1] DesignWare® Cores Enhanced Universal DDR Memory Controller (uMCTL2)
Databook, Version 3.91a, October 2020, p.424-425
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
Changelog v4:
- Retrieve ECC too.
---
drivers/edac/synopsys_edac.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index fbf1f8af9788..7376a0fc6394 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -305,6 +305,7 @@ struct snps_ddrc_info {
* @syndrome: Error syndrome.
* @bitpos: Bit position.
* @data: Data causing the error.
+ * @ecc: Data ECC.
*/
struct snps_ecc_error_info {
u32 row;
@@ -313,7 +314,8 @@ struct snps_ecc_error_info {
u32 bankgrp;
u32 syndrome;
u32 bitpos;
- u32 data;
+ u64 data;
+ u32 ecc;
};
/**
@@ -422,10 +424,10 @@ static int snps_get_error_info(struct snps_edac_priv *priv)
p->ceinfo.col = FIELD_GET(ECC_CEADDR1_COL_MASK, regval);
p->ceinfo.data = readl(base + ECC_CSYND0_OFST);
+ if (priv->info.dq_width == SNPS_DQ_64)
+ p->ceinfo.data |= (u64)readl(base + ECC_CSYND1_OFST) << 32;
- edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n",
- readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST),
- readl(base + ECC_CSYND2_OFST));
+ p->ceinfo.ecc = readl(base + ECC_CSYND2_OFST);
ue_err:
if (!p->ue_cnt)
@@ -440,6 +442,11 @@ static int snps_get_error_info(struct snps_edac_priv *priv)
p->ueinfo.col = FIELD_GET(ECC_CEADDR1_COL_MASK, regval);
p->ueinfo.data = readl(base + ECC_UESYND0_OFST);
+ if (priv->info.dq_width == SNPS_DQ_64)
+ p->ueinfo.data |= (u64)readl(base + ECC_UESYND1_OFST) << 32;
+
+ p->ueinfo.ecc = readl(base + ECC_UESYND2_OFST);
+
out:
spin_lock_irqsave(&priv->reglock, flags);
@@ -469,9 +476,9 @@ static void snps_handle_error(struct mem_ctl_info *mci, struct snps_ecc_status *
pinf = &p->ceinfo;
snprintf(priv->message, SNPS_EDAC_MSG_SIZE,
- "Row %d Col %d Bank %d Bank Group %d Bit %d Data 0x%08x",
+ "Row %d Col %d Bank %d Bank Group %d Bit %d Data 0x%08llx:0x%02x",
pinf->row, pinf->col, pinf->bank, pinf->bankgrp,
- pinf->bitpos, pinf->data);
+ pinf->bitpos, pinf->data, pinf->ecc);
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
p->ce_cnt, 0, 0, pinf->syndrome, 0, 0, -1,
@@ -482,8 +489,9 @@ static void snps_handle_error(struct mem_ctl_info *mci, struct snps_ecc_status *
pinf = &p->ueinfo;
snprintf(priv->message, SNPS_EDAC_MSG_SIZE,
- "Row %d Col %d Bank %d Bank Group %d",
- pinf->row, pinf->col, pinf->bank, pinf->bankgrp);
+ "Row %d Col %d Bank %d Bank Group %d Data 0x%08llx:0x%02x",
+ pinf->row, pinf->col, pinf->bank, pinf->bankgrp,
+ pinf->data, pinf->ecc);
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
p->ue_cnt, 0, 0, 0, 0, 0, -1,
--
2.41.0
next prev parent reply other threads:[~2023-09-20 19:29 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-20 19:26 [PATCH v4 00/18] EDAC/synopsys: Add generic DDRC info and address mapping Serge Semin
2023-09-20 19:26 ` [PATCH v4 01/18] EDAC/synopsys: Convert sysfs nodes to debugfs ones Serge Semin
2023-09-20 19:26 ` [PATCH v4 02/18] EDAC/mc: Extend memtypes with LPDDR(mDDR) and LPDDR2 Serge Semin
2023-09-20 19:26 ` [PATCH v4 03/18] EDAC/synopsys: Extend memtypes supported by controller Serge Semin
2023-09-20 19:26 ` [PATCH v4 04/18] EDAC/synopsys: Detach private data from mci instance Serge Semin
2023-09-20 19:26 ` [PATCH v4 05/18] EDAC/synopsys: Add DDRC basic parameters infrastructure Serge Semin
2023-09-26 8:07 ` kernel test robot
2023-09-26 8:56 ` Serge Semin
2023-09-20 19:26 ` [PATCH v4 06/18] EDAC/synopsys: Convert plat-data to plat-init function Serge Semin
2023-09-20 19:26 ` [PATCH v4 07/18] EDAC/synopsys: Parse ADDRMAP[7-8] CSRs for (LP)DDR4 only Serge Semin
2023-09-20 19:26 ` [PATCH v4 08/18] EDAC/synopsys: Parse ADDRMAP[0] CSR for multi-ranks case only Serge Semin
2023-09-20 19:26 ` [PATCH v4 09/18] EDAC/synopsys: Set actual DIMM ECC errors grain Serge Semin
2023-09-20 19:26 ` [PATCH v4 10/18] EDAC/synopsys: Get corrected bit position Serge Semin
2023-09-20 19:26 ` [PATCH v4 11/18] EDAC/synopsys: Pass syndrome to EDAC error handler Serge Semin
2023-09-20 19:26 ` Serge Semin [this message]
2023-09-20 19:26 ` [PATCH v4 13/18] EDAC/synopsys: Introduce System/SDRAM address translation interface Serge Semin
2023-09-27 7:13 ` kernel test robot
2023-09-20 19:26 ` [PATCH v4 14/18] EDAC/synopsys: Simplify HIF/SDRAM column mapping get procedure Serge Semin
2023-09-20 19:27 ` [PATCH v4 15/18] EDAC/synopsys: Add HIF/SDRAM mapping debugfs node Serge Semin
2023-09-20 19:46 ` [PATCH v4 16/18] EDAC/synopsys: Add erroneous page-frame/offset reporting Serge Semin
2023-09-20 19:50 ` [PATCH v4 17/18] EDAC/synopsys: Add system address regions support Serge Semin
2023-09-20 19:50 ` [PATCH v4 18/18] EDAC/synopsys: Add mapping-based memory size calculation Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230920192806.29960-13-fancer.lancer@gmail.com \
--to=fancer.lancer@gmail.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=dinguyen@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=james.morse@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=michal.simek@amd.com \
--cc=punnaiah.choudary.kalluri@xilinx.com \
--cc=rric@kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox