Linux EDAC development
 help / color / mirror / Atom feed
From: Yazen Ghannam <yazen.ghannam@amd.com>
To: Guenter Roeck <linux@roeck-us.net>, <x86@kernel.org>,
	Yazen Ghannam <yazen.ghannam@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>,
	<linux-edac@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-hwmon@vger.kernel.org>
Subject: [PATCH v3 5/8] hwmon: (k10temp) Define helper function to read CCD temp
Date: Thu, 23 May 2024 13:26:56 -0500	[thread overview]
Message-ID: <20240523-fix-smn-bad-read-v3-5-aa44c622de39@amd.com> (raw)
In-Reply-To: <20240523-fix-smn-bad-read-v3-0-aa44c622de39@amd.com>

The CCD temperature register is read in two places. These reads are done
using an AMD SMN access, and a number of parameters are needed for the
operation.

Move the SMN access and parameter gathering into a helper function in
order to simply the code flow. This also has a benefit of centralizing
the hardware register access in a single place in case fixes or special
decoding is required.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/k10temp.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 6cad35e7f182..315c52de6e54 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -158,6 +158,13 @@ static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval)
 		*regval = 0;
 }
 
+static int read_ccd_temp_reg(struct k10temp_data *data, int ccd, u32 *regval)
+{
+	u16 node_id = amd_pci_dev_to_node_id(data->pdev);
+
+	return amd_smn_read(node_id, ZEN_CCD_TEMP(data->ccd_offset, ccd), regval);
+}
+
 static long get_raw_temp(struct k10temp_data *data)
 {
 	u32 regval;
@@ -223,9 +230,7 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
 				*val = 0;
 			break;
 		case 2 ... 13:		/* Tccd{1-12} */
-			ret = amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
-					   ZEN_CCD_TEMP(data->ccd_offset, channel - 2),
-					   &regval);
+			ret = read_ccd_temp_reg(data, channel - 2, &regval);
 
 			if (ret)
 				return ret;
@@ -397,8 +402,7 @@ static void k10temp_get_ccd_support(struct pci_dev *pdev,
 		 * the register value. And this will incorrectly pass the TEMP_VALID
 		 * bit check.
 		 */
-		if (amd_smn_read(amd_pci_dev_to_node_id(pdev),
-				 ZEN_CCD_TEMP(data->ccd_offset, i), &regval))
+		if (read_ccd_temp_reg(data, i, &regval))
 			continue;
 
 		if (regval & ZEN_CCD_TEMP_VALID)

-- 
2.34.1


  parent reply	other threads:[~2024-05-23 18:27 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-23 18:26 [PATCH v3 0/8] Enhance AMD SMN Error Checking Yazen Ghannam
2024-05-23 18:26 ` [PATCH v3 1/8] EDAC/amd64: Remove unused register accesses Yazen Ghannam
2024-06-05  8:51   ` Borislav Petkov
2024-05-23 18:26 ` [PATCH v3 2/8] EDAC/amd64: Check return value of amd_smn_read() Yazen Ghannam
2024-05-25 13:22   ` Markus Elfring
2024-06-05  9:47   ` Borislav Petkov
2024-05-23 18:26 ` [PATCH v3 3/8] hwmon: (k10temp) " Yazen Ghannam
2024-05-25 13:32   ` Markus Elfring
2024-06-05 12:20   ` Borislav Petkov
2024-06-05 13:41     ` Yazen Ghannam
2024-06-05 16:12       ` Borislav Petkov
2024-06-05 16:30         ` Yazen Ghannam
2024-06-05 16:45           ` Borislav Petkov
2024-06-05 17:41             ` Yazen Ghannam
2024-05-23 18:26 ` [PATCH v3 4/8] x86/amd_nb: Enhance SMN access error checking Yazen Ghannam
2024-05-25 13:55   ` Markus Elfring
2024-05-23 18:26 ` Yazen Ghannam [this message]
2024-05-23 18:26 ` [PATCH v3 6/8] hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters Yazen Ghannam
2024-05-25 14:43   ` Markus Elfring
2024-05-23 18:26 ` [PATCH v3 7/8] hwmon: (k10temp) Remove unused HAVE_TDIE() macro Yazen Ghannam
2024-05-23 19:31   ` Guenter Roeck
2024-05-25 15:00   ` Markus Elfring
2024-05-23 18:26 ` [PATCH v3 8/8] hwmon: (k10temp) Rename _data variable Yazen Ghannam
2024-05-23 19:32   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240523-fix-smn-bad-read-v3-5-aa44c622de39@amd.com \
    --to=yazen.ghannam@amd.com \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mario.limonciello@amd.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox