From: Prasanna Panchamukhi <ppanchamukhi@riverbed.com>
To: dougthompson@xmission.com, bluesmoke-devel@lists.sourceforge.net
Cc: Rob Becker <Rob.Becker@riverbed.com>, Arthur.Jones@riverbed.com
Subject: EDAC: Linux-2.6.34-rc5 non correctable errors not reported on AMD64 Opteron
Date: Wed, 28 Apr 2010 10:14:02 -0700 [thread overview]
Message-ID: <4BD86CDA.9090206@riverbed.com> (raw)
Hi Doug,
I am trying to test Linux-2.6.34-rc5 EDAC driver on AMD64 Opteron.
I am able to inject single bit errors and get the edac driver report the
correctable errors.
But when I inject 2-bit errors, I did not see any notification or kernel
log, the system simply hangs.
This happens with or without edac_mc_panic_on_ue enabled.
Please let me know if I am missing something.
Below are the details.
Thanks
Prasanna
Steps to reproduce the problem:
1. Build Linux-2.6.34-rc5 using x86_64_defconfig with following additional config options enabled:
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
2. insert the kernel module
#insmod amd64_edac_mod.ko
3. Inject errors
# echo 3 > /sys/devices/system/edac/mc/mc0/inject_section
# echo 7 > /sys/devices/system/edac/mc/mc0/inject_word
# echo 0x88 > /sys/devices/system/edac/mc/mc0/inject_ecc_vector
# echo 1 > /sys/devices/system/edac/mc/mc0/inject_read
# echo 1 > /sys/devices/system/edac/mc/mc0/inject_write
4. Should hang the system in few minutes.
Additional info:
- AMD64 opteron
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : Quad-Core AMD Opteron(tm) Processor 2346 HE
stepping : 3
cpu MHz : 1800.023
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc
extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
bogomips : 3600.04
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : Quad-Core AMD Opteron(tm) Processor 2346 HE
stepping : 3
cpu MHz : 1800.023
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc
extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
bogomips : 3600.08
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : Quad-Core AMD Opteron(tm) Processor 2346 HE
stepping : 3
cpu MHz : 1800.023
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc
extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
bogomips : 3599.96
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : Quad-Core AMD Opteron(tm) Processor 2346 HE
stepping : 3
cpu MHz : 1800.023
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc
extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs npt lbrv svm_lock
bogomips : 3600.01
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
------------------------------------------------------------------------------
next reply other threads:[~2010-04-28 17:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-28 17:14 Prasanna Panchamukhi [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-04-29 18:30 EDAC linux-2.6.34-rc5 non correctable errors not reported on AMD64 opteron Prasanna S. Panchamukhi
2010-04-29 22:13 ` Keith Mannthey
2010-04-29 22:31 ` Prasanna S. Panchamukhi
2010-04-29 23:18 ` Keith Mannthey
2010-04-30 0:12 ` Prasanna S. Panchamukhi
2010-04-30 0:38 ` Keith Mannthey
2010-04-30 11:00 ` Borislav Petkov
2010-05-05 1:40 ` Prasanna S. Panchamukhi
2010-05-06 23:56 ` Prasanna S. Panchamukhi
2010-04-30 14:08 ` Ben Woodard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BD86CDA.9090206@riverbed.com \
--to=ppanchamukhi@riverbed.com \
--cc=Arthur.Jones@riverbed.com \
--cc=Rob.Becker@riverbed.com \
--cc=bluesmoke-devel@lists.sourceforge.net \
--cc=dougthompson@xmission.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).