From: Matt Fleming <matt-HNK1S37rvNbeXh+fF434Mdi2O/JbrIOy@public.gmane.org>
To: Jasper Bryant-Greene <jbg-NpJDBqUeXo2lVyrhU4qvOw@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: EFI boot problem in 3.11
Date: Sat, 26 Oct 2013 16:51:00 +0100 [thread overview]
Message-ID: <20131026155100.GC1982@console-pimps.org> (raw)
In-Reply-To: <32EA1272-FF5B-4FAA-B136-1447BF6F9876-NpJDBqUeXo2lVyrhU4qvOw@public.gmane.org>
On Thu, 24 Oct, at 12:14:26PM, Jasper Bryant-Greene wrote:
> I have a box here which is set up for EFI boot with no boot loader.
>
> The kernel is compiled with a built-in initrd and command line.
>
> In 3.10 this was all working well. However, after updating to 3.11.5 a
> reboot leads to the EFI firmware boot screen appearing followed by the
> middle section of it going black (just leaving two vertical stripes of
> the EFI firmware boot screen on either side of the screen) and the
> system locking up (numlock etc do not work).
>
> However, if I hit ‘delete’ quickly when powering on, and enter the
> firmware setup screen, I can then ‘exit without saving’ and the system
> will boot successfully — ‘save and exit’ does not work as that
> performs a full reboot while ‘exit without saving’ seems to continue
> the boot where it left off.
>
> Due to the aforementioned graphics corruption, I am wondering whether
> it is somehow related to the frame buffer? As this is a production
> system I unfortunately do not have flexibility to try a number of
> kernel versions in-between to locate where the issue was introduced.
Nothing springs to mind and nothing jumps out of the log in
drivers/video or arch/x86/platform/efi.
The best way to figure out what's causing this issue really is to bisect
the kernel versions. What hardware are you running on?
--
Matt Fleming, Intel Open Source Technology Center
parent reply other threads:[~2013-10-26 15:51 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <32EA1272-FF5B-4FAA-B136-1447BF6F9876-NpJDBqUeXo2lVyrhU4qvOw@public.gmane.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131026155100.GC1982@console-pimps.org \
--to=matt-hnk1s37rvnbexh+ff434mdi2o/jbrioy@public.gmane.org \
--cc=jbg-NpJDBqUeXo2lVyrhU4qvOw@public.gmane.org \
--cc=linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).