From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org, Ingo Molnar <mingo@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Arvind Sankar <nivedita@alum.mit.edu>,
Guenter Roeck <linux@roeck-us.net>, Joe Perches <joe@perches.com>
Subject: [PATCH 04/15] efi/x86: Use efi_err for error messages
Date: Fri, 8 May 2020 20:01:46 +0200 [thread overview]
Message-ID: <20200508180157.1816-5-ardb@kernel.org> (raw)
In-Reply-To: <20200508180157.1816-1-ardb@kernel.org>
From: Arvind Sankar <nivedita@alum.mit.edu>
Use efi_err instead of bare efi_printk for error messages.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200430182843.2510180-5-nivedita@alum.mit.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
drivers/firmware/efi/libstub/x86-stub.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f91d4aab0156..3800eb22232e 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -49,7 +49,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
(void **)&rom);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate memory for 'rom'\n");
+ efi_err("Failed to allocate memory for 'rom'\n");
return status;
}
@@ -65,7 +65,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
PCI_VENDOR_ID, 1, &rom->vendor);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to read rom->vendor\n");
+ efi_err("Failed to read rom->vendor\n");
goto free_struct;
}
@@ -73,7 +73,7 @@ preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
PCI_DEVICE_ID, 1, &rom->devid);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to read rom->devid\n");
+ efi_err("Failed to read rom->devid\n");
goto free_struct;
}
@@ -118,7 +118,7 @@ static void setup_efi_pci(struct boot_params *params)
(void **)&pci_handle);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate memory for 'pci_handle'\n");
+ efi_err("Failed to allocate memory for 'pci_handle'\n");
return;
}
@@ -172,7 +172,7 @@ static void retrieve_apple_device_properties(struct boot_params *boot_params)
return;
if (efi_table_attr(p, version) != 0x10000) {
- efi_printk("Unsupported properties proto version\n");
+ efi_err("Unsupported properties proto version\n");
return;
}
@@ -185,7 +185,7 @@ static void retrieve_apple_device_properties(struct boot_params *boot_params)
size + sizeof(struct setup_data),
(void **)&new);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate memory for 'properties'\n");
+ efi_err("Failed to allocate memory for 'properties'\n");
return;
}
@@ -372,7 +372,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
status = efi_bs_call(handle_protocol, handle, &proto, (void **)&image);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
+ efi_err("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
efi_exit(handle, status);
}
@@ -382,7 +382,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
status = efi_allocate_pages(sizeof(struct boot_params),
(unsigned long *)&boot_params, ULONG_MAX);
if (status != EFI_SUCCESS) {
- efi_printk("Failed to allocate lowmem for boot params\n");
+ efi_err("Failed to allocate lowmem for boot params\n");
efi_exit(handle, status);
}
@@ -749,7 +749,7 @@ unsigned long efi_main(efi_handle_t handle,
hdr->kernel_alignment,
LOAD_PHYSICAL_ADDR);
if (status != EFI_SUCCESS) {
- efi_printk("efi_relocate_kernel() failed!\n");
+ efi_err("efi_relocate_kernel() failed!\n");
goto fail;
}
/*
@@ -786,7 +786,7 @@ unsigned long efi_main(efi_handle_t handle,
efi_set_u64_split(size, &hdr->ramdisk_size,
&boot_params->ext_ramdisk_size);
} else if (status != EFI_NOT_FOUND) {
- efi_printk("efi_load_initrd_dev_path() failed!\n");
+ efi_err("efi_load_initrd_dev_path() failed!\n");
goto fail;
}
}
@@ -813,13 +813,13 @@ unsigned long efi_main(efi_handle_t handle,
status = exit_boot(boot_params, handle);
if (status != EFI_SUCCESS) {
- efi_printk("exit_boot() failed!\n");
+ efi_err("exit_boot() failed!\n");
goto fail;
}
return bzimage_addr;
fail:
- efi_printk("efi_main() failed!\n");
+ efi_err("efi_main() failed!\n");
efi_exit(handle, status);
}
--
2.17.1
next prev parent reply other threads:[~2020-05-08 18:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 18:01 [GIT PULL 00/15] More EFI changes for v5.8 Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 01/15] efi/x86: Use correct size for boot_params Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 02/15] efi/libstub: Add a helper function to split 64-bit values Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 03/15] efi/libstub: Move pr_efi/pr_efi_err into efi namespace Ard Biesheuvel
2020-05-08 18:01 ` Ard Biesheuvel [this message]
2020-05-08 18:01 ` [PATCH 05/15] efi/gop: Use efi_err for error messages Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 06/15] efi/tpm: " Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 07/15] efi/libstub: Upgrade ignored dtb= argument message to error Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 08/15] efi/x86: Move command-line initrd loading to efi_main Ard Biesheuvel
2020-05-27 22:30 ` Williams, Dan J
2020-05-27 22:46 ` Arvind Sankar
2020-05-27 22:56 ` Dan Williams
2020-05-27 23:02 ` Arvind Sankar
2020-05-27 23:13 ` Dan Williams
2020-05-27 23:26 ` [PATCH] efi/x86: Don't blow away existing initrd Arvind Sankar
2020-05-28 6:34 ` Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 09/15] efi/libstub: Unify initrd loading across architectures Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 10/15] efi/x86: Support builtin command line Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 11/15] efi/libstub: Check return value of efi_parse_options Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 12/15] efi/libstub: Fix mixed mode boot issue after macro refactor Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 13/15] efi/libstub/x86: Work around LLVM ELF quirk build regression Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 14/15] efi/libstub: Make efi_printk() input argument const char* Ard Biesheuvel
2020-05-08 18:01 ` [PATCH 15/15] efi/libstub: Correct comment typos Ard Biesheuvel
2020-05-14 9:05 ` [GIT PULL 00/15] More EFI changes for v5.8 Ard Biesheuvel
2020-05-20 7:20 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508180157.1816-5-ardb@kernel.org \
--to=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=joe@perches.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mingo@kernel.org \
--cc=nivedita@alum.mit.edu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).