From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Ard Biesheuvel <ardb@kernel.org>,
Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v9 05/23] x86/decompressor: Avoid magic offsets for EFI handover entrypoint
Date: Mon, 7 Aug 2023 18:27:02 +0200 [thread overview]
Message-ID: <20230807162720.545787-6-ardb@kernel.org> (raw)
In-Reply-To: <20230807162720.545787-1-ardb@kernel.org>
The native 32-bit or 64-bit EFI handover protocol entrypoint offset
relative to the respective startup_32/64 address is described in
boot_params as handover_offset, so that the special Linux/x86 aware EFI
loader can find it there.
When mixed mode is enabled, this single field has to describe this
offset for both the 32-bit and 64-bit entrypoints, so their respective
relative offsets have to be identical. Given that startup_32 and
startup_64 are 0x200 bytes apart, and the EFI handover entrypoint
resides at a fixed offset, the 32-bit and 64-bit versions of those
entrypoints must be exactly 0x200 bytes apart as well.
Currently, hard-coded fixed offsets are used to ensure this, but it is
sufficient to emit the 64-bit entrypoint 0x200 bytes after the 32-bit
one, wherever it happens to reside. This allows this code (which is now
EFI mixed mode specific) to be moved into efi_mixed.S and out of the
startup code in head_64.S.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/x86/boot/compressed/efi_mixed.S | 20 +++++++++++++++++++-
arch/x86/boot/compressed/head_64.S | 18 ------------------
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index dcc562c8f7f35162..9308b595f6f0a5de 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -140,6 +140,16 @@ SYM_FUNC_START(__efi64_thunk)
SYM_FUNC_END(__efi64_thunk)
.code32
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+SYM_FUNC_START(efi32_stub_entry)
+ add $0x4, %esp /* Discard return address */
+ popl %ecx
+ popl %edx
+ popl %esi
+ jmp efi32_entry
+SYM_FUNC_END(efi32_stub_entry)
+#endif
+
/*
* EFI service pointer must be in %edi.
*
@@ -220,7 +230,7 @@ SYM_FUNC_END(efi_enter32)
* stub may still exit and return to the firmware using the Exit() EFI boot
* service.]
*/
-SYM_FUNC_START(efi32_entry)
+SYM_FUNC_START_LOCAL(efi32_entry)
call 1f
1: pop %ebx
@@ -320,6 +330,14 @@ SYM_FUNC_START(efi32_pe_entry)
RET
SYM_FUNC_END(efi32_pe_entry)
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+ .org efi32_stub_entry + 0x200
+ .code64
+SYM_FUNC_START_NOALIGN(efi64_stub_entry)
+ jmp efi_stub_entry
+SYM_FUNC_END(efi64_stub_entry)
+#endif
+
.section ".rodata"
/* EFI loaded image protocol GUID */
.balign 4
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index e6880208b9a1b90a..a3f764daf3a3adbc 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -294,17 +294,6 @@ SYM_FUNC_START(startup_32)
lret
SYM_FUNC_END(startup_32)
-#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
- .org 0x190
-SYM_FUNC_START(efi32_stub_entry)
- add $0x4, %esp /* Discard return address */
- popl %ecx
- popl %edx
- popl %esi
- jmp efi32_entry
-SYM_FUNC_END(efi32_stub_entry)
-#endif
-
.code64
.org 0x200
SYM_CODE_START(startup_64)
@@ -542,13 +531,6 @@ trampoline_return:
jmp *%rax
SYM_CODE_END(startup_64)
-#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
- .org 0x390
-SYM_FUNC_START(efi64_stub_entry)
- jmp efi_stub_entry
-SYM_FUNC_END(efi64_stub_entry)
-#endif
-
.text
SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
--
2.39.2
next prev parent reply other threads:[~2023-08-07 16:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-07 16:26 [PATCH v9 00/23] efi/x86: Avoid bare metal decompressor during EFI boot Ard Biesheuvel
2023-08-07 16:26 ` [PATCH v9 01/23] x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved Ard Biesheuvel
2023-08-07 16:26 ` [PATCH v9 02/23] x86/head_64: Store boot_params pointer in callee save register Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 03/23] x86/efistub: Branch straight to kernel entry point from C code Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 04/23] x86/efistub: Simplify and clean up handover entry code Ard Biesheuvel
2023-08-07 16:27 ` Ard Biesheuvel [this message]
2023-08-07 16:27 ` [PATCH v9 06/23] x86/efistub: Clear BSS in EFI handover protocol entrypoint Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 07/23] x86/decompressor: Store boot_params pointer in callee save register Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 08/23] x86/decompressor: Assign paging related global variables earlier Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 09/23] x86/decompressor: Call trampoline as a normal function Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 10/23] x86/decompressor: Use standard calling convention for trampoline Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 11/23] x86/decompressor: Avoid the need for a stack in the 32-bit trampoline Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 12/23] x86/decompressor: Call trampoline directly from C code Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 13/23] x86/decompressor: Only call the trampoline when changing paging levels Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 14/23] x86/decompressor: Pass pgtable address to trampoline directly Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 15/23] x86/decompressor: Merge trampoline cleanup with switching code Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 16/23] x86/efistub: Perform 4/5 level paging switch from the stub Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 17/23] x86/efistub: Prefer EFI memory attributes protocol over DXE services Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 18/23] decompress: Use 8 byte alignment Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 19/23] x86/decompressor: Move global symbol references to C code Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 20/23] x86/decompressor: Factor out kernel decompression and relocation Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 21/23] efi/libstub: Add limit argument to efi_random_alloc() Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 22/23] x86/efistub: Perform SNP feature test while running in the firmware Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 23/23] x86/efistub: Avoid legacy decompressor when doing EFI boot Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230807162720.545787-6-ardb@kernel.org \
--to=ardb@kernel.org \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox