From: Ard Biesheuvel <ardb+git@google.com>
To: linux-efi@vger.kernel.org
Cc: x86@kernel.org, Ard Biesheuvel <ardb@kernel.org>,
Clayton Craft <clayton@craftyguy.net>,
stable@kernel.org
Subject: [PATCH 1/2] x86/efistub: Call mixed mode boot services on the firmware's stack
Date: Fri, 22 Mar 2024 17:17:53 +0100 [thread overview]
Message-ID: <20240322161751.3046943-5-ardb+git@google.com> (raw)
In-Reply-To: <20240322161751.3046943-4-ardb+git@google.com>
From: Ard Biesheuvel <ardb@kernel.org>
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/x86/boot/compressed/efi_mixed.S | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index f4e22ef774ab..c21afc9c84f1 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -83,6 +83,10 @@ SYM_FUNC_START(__efi64_thunk)
movq 0x38(%rsp), %rbx
movq 0x40(%rsp), %rax
+ /* Switch to the firmware's stack */
+ movq %rsp, %r11
+ movl efi32_boot_sp(%rip), %esp
+
/*
* Convert x86-64 ABI params to i386 ABI
*/
@@ -120,7 +124,7 @@ SYM_FUNC_START(__efi64_thunk)
pushq %rax
lretq
-1: addq $64, %rsp
+1: movq %r11, %rsp
movq %rdi, %rax
pop %rbx
@@ -254,6 +258,9 @@ SYM_FUNC_START_LOCAL(efi32_entry)
/* Store firmware IDT descriptor */
sidtl (efi32_boot_idt - 1b)(%ebx)
+ /* Store firmware stack pointer */
+ movl %esp, (efi32_boot_sp - 1b)(%ebx)
+
/* Store boot arguments */
leal (efi32_boot_args - 1b)(%ebx), %ebx
movl %ecx, 0(%ebx)
@@ -318,5 +325,6 @@ SYM_DATA_END(efi32_boot_idt)
SYM_DATA_LOCAL(efi32_boot_cs, .word 0)
SYM_DATA_LOCAL(efi32_boot_ds, .word 0)
+SYM_DATA_LOCAL(efi32_boot_sp, .long 0)
SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0)
SYM_DATA(efi_is64, .byte 1)
--
2.44.0.396.g6e790dbe36-goog
next prev parent reply other threads:[~2024-03-22 16:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-22 16:17 [PATCH 0/2] EFI mixed mode fixes Ard Biesheuvel
2024-03-22 16:17 ` Ard Biesheuvel [this message]
2024-03-22 16:17 ` [PATCH 2/2] x86/efistub: Don't clear BSS twice in mixed mode Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240322161751.3046943-5-ardb+git@google.com \
--to=ardb+git@google.com \
--cc=ardb@kernel.org \
--cc=clayton@craftyguy.net \
--cc=linux-efi@vger.kernel.org \
--cc=stable@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox