From: Ard Biesheuvel <ardb+git@google.com>
To: linux-efi@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>, Jonathan Marek <jonathan@marek.ca>
Subject: [PATCH 3/4] efi/libstub: Fix command line fallback handling when loading files
Date: Tue, 15 Oct 2024 20:15:53 +0200 [thread overview]
Message-ID: <20241015181549.3121999-9-ardb+git@google.com> (raw)
In-Reply-To: <20241015181549.3121999-6-ardb+git@google.com>
From: Ard Biesheuvel <ardb@kernel.org>
CONFIG_CMDLINE, when set, is supposed to serve either as a fallback when
no command line is provided by the bootloader, or to be taken into account
unconditionally, depending on the configured options.
The initrd and dtb loader ignores CONFIG_CMDLINE in either case, and
only takes the EFI firmware provided load options into account. This
means that configuring the kernel with initrd= or dtb= on the built-in
command line does not produce the expected result.
Fix this by doing a separate pass over the built-in command line when
dealing with initrd= or dtb= options.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
drivers/firmware/efi/libstub/file.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c
index d6a025df07dc..17bf25dccc07 100644
--- a/drivers/firmware/efi/libstub/file.c
+++ b/drivers/firmware/efi/libstub/file.c
@@ -189,6 +189,7 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
unsigned long *load_addr,
unsigned long *load_size)
{
+ const bool ignore_load_options = false;
const efi_char16_t *cmdline = efi_table_attr(image, load_options);
u32 cmdline_len = efi_table_attr(image, load_options_size);
unsigned long efi_chunk_size = ULONG_MAX;
@@ -197,6 +198,7 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
unsigned long alloc_addr;
unsigned long alloc_size;
efi_status_t status;
+ bool twopass;
int offset;
if (!load_addr || !load_size)
@@ -209,6 +211,21 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
efi_chunk_size = EFI_READ_CHUNK_SIZE;
alloc_addr = alloc_size = 0;
+
+ if (!ignore_load_options && cmdline_len > 0) {
+ twopass = IS_ENABLED(CONFIG_CMDLINE_BOOL) ||
+ IS_ENABLED(CONFIG_CMDLINE_EXTEND);
+ } else {
+do_builtin:
+#ifdef CONFIG_CMDLINE
+ static const efi_char16_t builtin_cmdline[] = L"" CONFIG_CMDLINE;
+
+ cmdline = builtin_cmdline;
+ cmdline_len = ARRAY_SIZE(builtin_cmdline) - 1;
+#endif
+ twopass = false;
+ }
+
do {
struct finfo fi;
unsigned long size;
@@ -290,6 +307,9 @@ efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
efi_call_proto(volume, close);
} while (offset > 0);
+ if (twopass)
+ goto do_builtin;
+
*load_addr = alloc_addr;
*load_size = alloc_size;
--
2.47.0.rc1.288.g06298d1525-goog
next prev parent reply other threads:[~2024-10-15 18:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 18:15 [PATCH 0/4] efi/libstub: Clean up command line handling Ard Biesheuvel
2024-10-15 18:15 ` [PATCH 1/4] efi/libstub: Free correct pointer on failure Ard Biesheuvel
2024-10-15 18:15 ` [PATCH 2/4] efi/libstub: Parse builtin command line after bootloader provided one Ard Biesheuvel
2024-10-15 18:15 ` Ard Biesheuvel [this message]
2024-10-15 18:15 ` [PATCH 4/4] efi/libstub: Take command line overrides into account for loaded files Ard Biesheuvel
-- strict thread matches above, loose matches on Subject: below --
2024-11-15 9:28 [PATCH 1/4] efi/libstub: Free correct pointer on failure Ard Biesheuvel
2024-11-15 9:28 ` [PATCH 3/4] efi/libstub: Fix command line fallback handling when loading files Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241015181549.3121999-9-ardb+git@google.com \
--to=ardb+git@google.com \
--cc=ardb@kernel.org \
--cc=jonathan@marek.ca \
--cc=linux-efi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox