Linux EFI development
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb+git@google.com>
To: linux-efi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	Ard Biesheuvel <ardb@kernel.org>,
	 Jason Gunthorpe <jgg@nvidia.com>, Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	 Albert Ou <aou@eecs.berkeley.edu>,
	Huacai Chen <chenhuacai@kernel.org>,
	loongarch@lists.linux.dev,  linux-riscv@lists.infradead.org
Subject: [PATCH v3 10/15] efi/libstub: riscv: Use struct efi_image_info to access image properties
Date: Mon, 16 Nov 2026 15:26:29 +0100	[thread overview]
Message-ID: <20261116142618.1687025-27-ardb+git@google.com> (raw)
In-Reply-To: <20261116142618.1687025-17-ardb+git@google.com>

From: Ard Biesheuvel <ardb@kernel.org>

Instead of exposing individual symbols to the EFI stub explicitly via
the linker script, use the generic struct efi_image_info, which accesses
the original symbols via PC-relative references from the stub itself.

This improves code reuse across architectures, and makes it easier to
add new references in a generic manner.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/riscv/kernel/image-vars.h            |  8 -------
 drivers/firmware/efi/libstub/riscv-stub.c | 25 +++++---------------
 2 files changed, 6 insertions(+), 27 deletions(-)

diff --git a/arch/riscv/kernel/image-vars.h b/arch/riscv/kernel/image-vars.h
index bf703eba3fa5..c18b24792a29 100644
--- a/arch/riscv/kernel/image-vars.h
+++ b/arch/riscv/kernel/image-vars.h
@@ -23,14 +23,6 @@
  * linked at. The routines below are all implemented in assembler in a
  * position independent manner
  */
-__efistub__start		= _start;
-__efistub__start_kernel		= _start_kernel;
-__efistub__end			= _end;
-__efistub__edata		= _edata;
-__efistub___inittext_end	= __inittext_end;
-#if defined(CONFIG_EFI_EARLYCON) || defined(CONFIG_SYSFB)
-__efistub_sysfb_primary_display	= sysfb_primary_display;
-#endif
 
 /*
  * These double-word integer shifts are used by the library code, and
diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
index 0ddbe7cc8628..58581ccb4cc0 100644
--- a/drivers/firmware/efi/libstub/riscv-stub.c
+++ b/drivers/firmware/efi/libstub/riscv-stub.c
@@ -6,23 +6,10 @@
 #include <linux/efi.h>
 
 #include <asm/efi.h>
-#include <asm/sections.h>
 #include <linux/unaligned.h>
 
 #include "efistub.h"
 
-unsigned long stext_offset(void)
-{
-	/*
-	 * When built as part of the kernel, the EFI stub cannot branch to the
-	 * kernel proper via the image header, as the PE/COFF header is
-	 * strictly not part of the in-memory presentation of the image, only
-	 * of the file representation. So instead, we need to jump to the
-	 * actual entrypoint in the .text region of the image.
-	 */
-	return _start_kernel - _start;
-}
-
 efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 unsigned long *image_size,
 				 unsigned long *reserve_addr,
@@ -31,13 +18,13 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 				 efi_handle_t image_handle,
 				 const struct efi_image_info **image_info)
 {
-	unsigned long kernel_size, kernel_codesize, kernel_memsize;
+	unsigned long kernel_base	= efistub_kernel_base(*image_info);
+	unsigned long kernel_size	= efistub_kernel_size(*image_info);
+	unsigned long kernel_codesize	= efistub_kernel_codesize(*image_info);
+	unsigned long kernel_memsize	= efistub_kernel_memsize(*image_info);
 	efi_status_t status;
 
-	kernel_size = _edata - _start;
-	kernel_codesize = __inittext_end - _start;
-	kernel_memsize = kernel_size + (_end - _edata);
-	*image_addr = (unsigned long)_start;
+	*image_addr = kernel_base;
 	*reserve_size = kernel_memsize;
 
 	status = efi_kaslr_relocate_kernel(image_addr,
@@ -47,7 +34,7 @@ efi_status_t handle_kernel_image(unsigned long *image_addr,
 	if (status != EFI_SUCCESS)
 		efi_err("Failed to relocate kernel\n");
 
-	*(unsigned long *)image_info += *image_addr - (unsigned long)_start;
+	*(unsigned long *)image_info += *image_addr - kernel_base;
 	return status;
 }
 
-- 
2.56.0.611.g1030f0b940-goog


  parent reply	other threads:[~2026-11-16 14:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16 14:26 [PATCH v3 00/15] efi: Expose loaded image properties via info struct Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 01/15] efi/zboot: arm64: Add missing barrier after cache maintenance Ard Biesheuvel
2026-11-16 14:33   ` sashiko-bot
2026-11-16 14:26 ` [PATCH v3 02/15] riscv: Use _stext not _text to denote the start of kernel code Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 03/15] riscv: Make _text point to the start of the kernel image Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 04/15] efi/riscv: Rename __init_text_end to __inittext_end like other archs Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 05/15] efi/libstub: Avoid _end section marker in library code Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 06/15] efi/libstub: Capture loaded image information in struct efi_image_info Ard Biesheuvel
2026-11-16 14:59   ` sashiko-bot
2026-11-16 14:26 ` [PATCH v3 07/15] efi/libstub: Pass kernel entrypoint down to efi_enter_kernel() Ard Biesheuvel
2026-11-16 14:39   ` sashiko-bot
2026-11-16 14:26 ` [PATCH v3 08/15] efi/libstub: arm64: Use struct efi_image_info to access image properties Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 09/15] efi/libstub: loongarch: " Ard Biesheuvel
2026-11-16 14:40   ` sashiko-bot
2026-11-16 14:26 ` Ard Biesheuvel [this message]
2026-11-16 14:26 ` [PATCH v3 11/15] efi/libstub: Make efi_remap_image() return efi_status_t Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 12/15] efi/zboot: Disentangle efi_remap_image() from efi_cache_sync_image() Ard Biesheuvel
2026-11-16 14:52   ` sashiko-bot
2026-11-16 14:26 ` [PATCH v3 13/15] efi/libstub: arm64: Drop zboot code_size hack Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 14/15] efi: Make config table based primary display handover ARM-only again Ard Biesheuvel
2026-11-16 14:26 ` [PATCH v3 15/15] Revert "efi: earlycon: Reprobe after parsing config tables" Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116142618.1687025-27-ardb+git@google.com \
    --to=ardb+git@google.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=ardb@kernel.org \
    --cc=chenhuacai@kernel.org \
    --cc=jgg@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=loongarch@lists.linux.dev \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox