From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>, Ard Biesheuvel <ardb@kernel.org>,
Hans de Goede <hansg@kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
linux-efi@vger.kernel.org, platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH v4 1/2] efi: Save Brightness using EFI on Macs
Date: Thu, 21 May 2026 15:29:34 +0300 (EEST) [thread overview]
Message-ID: <a527feee-441c-aaf8-9aff-f5bee8b97b6d@linux.intel.com> (raw)
In-Reply-To: <20260316153407.1781-2-atharvatiwarilinuxdev@gmail.com>
On Mon, 16 Mar 2026, Atharva Tiwari wrote:
> Currently when a Mac reboots, the brightness is not the same
> as the previous boot instead its the same as the last time the
When a Mac reboots, it does not preserve the brightness from the previous
boot, instead ...
It might be worth to expand that to mention what brightness you're
talking about here and in the Kconfig description.
> Mac booted macOS.
>
> We can fix this issue by saving the brightness level to the efivar
Please use imperative tone. Do not use "I" (nor "We" nor "This patch").
> backlight-level.
>
> (tested on iMac20,1)
>
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
> ---
> drivers/firmware/efi/Kconfig | 10 +++
> drivers/firmware/efi/Makefile | 1 +
> drivers/firmware/efi/apple-brightness.c | 67 +++++++++++++++++++
> .../linux/platform_data/apple-brightness.h | 20 ++++++
> 4 files changed, 98 insertions(+)
> create mode 100644 drivers/firmware/efi/apple-brightness.c
> create mode 100644 include/linux/platform_data/apple-brightness.h
>
> diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
> index 29e0729299f5..243499a5d7b7 100644
> --- a/drivers/firmware/efi/Kconfig
> +++ b/drivers/firmware/efi/Kconfig
> @@ -167,6 +167,16 @@ config APPLE_PROPERTIES
>
> If unsure, say Y if you have a Mac. Otherwise N.
>
> +config APPLE_BRIGHTNESS
> + bool "Apple Backlight control for EFI"
> + depends on X86
Doesn't the build fail if CONFIG_EFI is not set?
> + help
> + This will save the brightness level to EFI, so brightness
> + level is preserved across reboots and shutdowns. allowing
English sounds broken because of that period.
> + for improved support of Apple hardware.
> +
> + If unsure, say Y if you have a Mac, otherwise N.
> +
> config RESET_ATTACK_MITIGATION
> bool "Reset memory attack mitigation"
> depends on EFI_STUB
> diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
> index 8efbcf699e4f..1f5705cc87a2 100644
> --- a/drivers/firmware/efi/Makefile
> +++ b/drivers/firmware/efi/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_EFI_BOOTLOADER_CONTROL) += efibc.o
> obj-$(CONFIG_EFI_TEST) += test/
> obj-$(CONFIG_EFI_DEV_PATH_PARSER) += dev-path-parser.o
> obj-$(CONFIG_APPLE_PROPERTIES) += apple-properties.o
> +obj-$(CONFIG_APPLE_BRIGHTNESS) += apple-brightness.o
> obj-$(CONFIG_EFI_RCI2_TABLE) += rci2-table.o
> obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE) += embedded-firmware.o
> obj-$(CONFIG_LOAD_UEFI_KEYS) += mokvar-table.o
> diff --git a/drivers/firmware/efi/apple-brightness.c b/drivers/firmware/efi/apple-brightness.c
> new file mode 100644
> index 000000000000..b060861b0795
> --- /dev/null
> +++ b/drivers/firmware/efi/apple-brightness.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * apple-brightness.c - EFI brightness saver on Macs
> + * Copyright (C) 2026 Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/backlight.h>
> +#include <linux/efi.h>
> +#include <linux/platform_data/apple-brightness.h>
> +
> +static u32 efi_attr;
> +static u16 last_saved_level;
> +
> +static int (*get_brightness)(struct backlight_device *bl);
> +static struct backlight_device *bl_dev;
> +
> +void apple_brightness_shutdown(void)
> +{
> + u16 level;
> + efi_status_t status;
> +
> + level = (u16)get_brightness(bl_dev);
> +
> + if (level == last_saved_level)
> + return;
> +
> + status = efivar_set_variable(APPLE_BRIGHTNESS_NAME, &APPLE_BRIGHTNESS_GUID,
> + efi_attr, sizeof(level), &level);
Align to (
> + if (status != EFI_SUCCESS)
> + pr_debug("Unable to set brightness: 0x%lx\n", status);
Add include.
> +}
> +EXPORT_SYMBOL(apple_brightness_shutdown);
Please put exports to a namespace.
Also, these look very much _GPL exports as you're passing
get_brightnessfn around.
> +
> +int apple_brightness_probe(struct backlight_device *bl,
> + int (*get_brightnessfn)(struct backlight_device *bl))
> +{
> + efi_status_t status;
> + unsigned long size = sizeof(last_saved_level);
> + int ret;
> +
> + bl_dev = bl;
> + get_brightness = get_brightnessfn;
> +
> + if (!efi_rt_services_supported(EFI_RT_SUPPORTED_SET_VARIABLE))
> + return -ENODEV;
> +
> + ret = efivar_lock();
> + if (ret)
> + return ret;
> +
> + status = efivar_get_variable(APPLE_BRIGHTNESS_NAME, &APPLE_BRIGHTNESS_GUID,
> + &efi_attr, &size, &last_saved_level);
Align to (
> +
> + efivar_unlock();
> +
> + if (status != EFI_SUCCESS)
> + return -ENODEV;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(apple_brightness_probe);
> +
> +MODULE_AUTHOR("Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>");
> +MODULE_DESCRIPTION("EFI Brightness saver for Macs");
> +MODULE_LICENSE("Dual MIT/GPL");
> diff --git a/include/linux/platform_data/apple-brightness.h b/include/linux/platform_data/apple-brightness.h
> new file mode 100644
> index 000000000000..54e3f3f8aa1c
> --- /dev/null
> +++ b/include/linux/platform_data/apple-brightness.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
> +/*
> + * apple-brightness.h - EFI brightness saver for Macs
> + * Copyright (C) 2026 Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
> + */
> +
> +#ifndef _APPLE_BL_H_
> +#define _APPLE_BL_H_
> +
> +#include <linux/backlight.h>
This can be replaced with just forward declaration of:
struct backlight_device;
> +#include <linux/efi.h>
> +
> +#define APPLE_BRIGHTNESS_NAME L"backlight-level"
> +#define APPLE_BRIGHTNESS_GUID EFI_GUID(0x7c436110, 0xab2a, 0x4bbb, 0xa8, 0x80, 0xfe, 0x41, 0x99, 0x5c, 0x9f, 0x82)
> +
> +int apple_brightness_probe(struct backlight_device *bl,
> + int (*get_brightnessfn)(struct backlight_device *bl));
Align to (
> +
> +void apple_brightness_shutdown(void);
> +#endif /* _APPLE_BL_H */
>
--
i.
next prev parent reply other threads:[~2026-05-21 12:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-16 15:33 [PATCH v4 0/2] Save Brightness on Macs Atharva Tiwari
2026-03-16 15:33 ` [PATCH v4 1/2] efi: Save Brightness using EFI " Atharva Tiwari
2026-03-17 9:39 ` Aditya Garg
2026-03-17 9:52 ` Aditya Garg
2026-05-21 12:29 ` Ilpo Järvinen [this message]
2026-03-16 15:33 ` [PATCH v4 2/2] platform/apple-gmux: use apple_brightness to save brightness to EFI Atharva Tiwari
2026-05-21 12:43 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a527feee-441c-aaf8-9aff-f5bee8b97b6d@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=ardb@kernel.org \
--cc=atharvatiwarilinuxdev@gmail.com \
--cc=hansg@kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox