From: Lukas Wunner <lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
To: linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Matt Fleming
<matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Andreas Noever
<andreas.noever-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
grub-devel-mXXj517/zsQ@public.gmane.org,
x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Subject: [PATCH v2 0/4] Apple device properties
Date: Wed, 7 Sep 2016 12:49:18 +0200 [thread overview]
Message-ID: <cover.1473242067.git.lukas@wunner.de> (raw)
Retrieve device properties from EFI on Macs before ExitBootServices is
called and assign them to devices (patch [3/4]). The devices that
properties pertain to are encoded as EFI Device Paths, so add a parser
for these (patch [2/4]). As a first use case, amend the Thunderbolt driver
to take advantage of the Device ROM supplied by EFI (patch [4/4]).
Patch [1/4] is already queued in Rafael J. Wysocki's tree for 4.9 and is
included here only because patch [2/4] wouldn't compile without it.
The series also depends on these two patches which are already queued
in Matt's tree for 4.9:
- x86/efi: Optimize away setup_gop32/64 if unused
https://patchwork.kernel.org/patch/9315763/
- x86/efi: Allow invocation of arbitrary boot services
https://patchwork.kernel.org/patch/9293371/
Changes since v1:
- Previously there were two separate patches for retrieving properties
and assigning them to devices. These are now squashed together in
patch [3/4]. (Requested by Matt Fleming.)
- The version of the EFI properties protocol as well as the properties
payload is now checked.
- Applied a bit of polish all over.
Link to v1:
https://lkml.org/lkml/2016/7/27/218
Browseable on GitHub:
https://github.com/l1k/linux/commits/apple_properties_v2
Thanks,
Lukas
Lukas Wunner (4):
ACPI / bus: Make acpi_get_first_physical_node() public
efi: Add device path parser
x86/efi: Retrieve and assign Apple device properties
thunderbolt: Use Device ROM retrieved from EFI
Documentation/kernel-parameters.txt | 5 +
arch/x86/boot/compressed/eboot.c | 63 +++++++++
arch/x86/include/uapi/asm/bootparam.h | 1 +
drivers/acpi/internal.h | 1 -
drivers/firmware/efi/Kconfig | 18 +++
drivers/firmware/efi/Makefile | 2 +
drivers/firmware/efi/apple-properties.c | 230 ++++++++++++++++++++++++++++++++
drivers/firmware/efi/dev-path-parser.c | 186 ++++++++++++++++++++++++++
drivers/thunderbolt/Kconfig | 1 +
drivers/thunderbolt/eeprom.c | 42 ++++++
drivers/thunderbolt/switch.c | 2 +-
include/linux/acpi.h | 7 +
include/linux/efi.h | 38 ++++++
13 files changed, 594 insertions(+), 2 deletions(-)
create mode 100644 drivers/firmware/efi/apple-properties.c
create mode 100644 drivers/firmware/efi/dev-path-parser.c
--
2.9.3
next reply other threads:[~2016-09-07 10:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-07 10:49 Lukas Wunner [this message]
[not found] ` <cover.1473242067.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-09-07 10:49 ` [PATCH v2 2/4] efi: Add device path parser Lukas Wunner
2016-09-07 10:49 ` [PATCH v2 1/4] ACPI / bus: Make acpi_get_first_physical_node() public Lukas Wunner
2016-09-13 11:29 ` [PATCH v2 0/4] Apple device properties Matt Fleming
2016-09-07 10:49 ` [PATCH v2 4/4] thunderbolt: Use Device ROM retrieved from EFI Lukas Wunner
2016-09-07 10:49 ` [PATCH v2 3/4] x86/efi: Retrieve and assign Apple device properties Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1473242067.git.lukas@wunner.de \
--to=lukas-jfq808j9c/izqb+pc5nmwq@public.gmane.org \
--cc=andreas.noever-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=grub-devel-mXXj517/zsQ@public.gmane.org \
--cc=linux-efi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matt-mF/unelCI9GS6iBeEJttW/XRex20P6io@public.gmane.org \
--cc=x86-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).