* Where to post an embedded-centric filesystem driver?
@ 2010-08-04 12:16 Bill Gatliff
2010-08-04 12:18 ` David Woodhouse
0 siblings, 1 reply; 2+ messages in thread
From: Bill Gatliff @ 2010-08-04 12:16 UTC (permalink / raw)
To: linux-embedded
Guys:
I just finished a filesystem driver that provides Linux the ability to
do a read-only mount of Micromonitor's TFS filesystem. Micromonitor
is a great little bootloader that I use on all my boards. A
read-write filesystem driver for Linux is in the works.
Nobody outside of the embedded world will ever hear of
Micromonitor/TFS. So I'm not quite sure where to post my patches.
Suggestions?
b.g.
--
Bill Gatliff
bgat@billgatliff.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Where to post an embedded-centric filesystem driver?
2010-08-04 12:16 Where to post an embedded-centric filesystem driver? Bill Gatliff
@ 2010-08-04 12:18 ` David Woodhouse
0 siblings, 0 replies; 2+ messages in thread
From: David Woodhouse @ 2010-08-04 12:18 UTC (permalink / raw)
To: Bill Gatliff; +Cc: linux-embedded
On Wed, 2010-08-04 at 07:16 -0500, Bill Gatliff wrote:
>
>
> I just finished a filesystem driver that provides Linux the ability to
> do a read-only mount of Micromonitor's TFS filesystem. Micromonitor
> is a great little bootloader that I use on all my boards. A
> read-write filesystem driver for Linux is in the works.
>
> Nobody outside of the embedded world will ever hear of
> Micromonitor/TFS. So I'm not quite sure where to post my patches.
> Suggestions?
linux-fsdevel@vger.kernel.org
--
David Woodhouse Open Source Technology Centre
David.Woodhouse@intel.com Intel Corporation
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-08-04 12:18 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-04 12:16 Where to post an embedded-centric filesystem driver? Bill Gatliff
2010-08-04 12:18 ` David Woodhouse
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).