From: Grant Likely <grant.likely@secretlab.ca>
To: Bill Gatliff <bgat@billgatliff.com>
Cc: linux-embedded@vger.kernel.org
Subject: Re: [PWM 05/10] LED "dim" trigger based on PWM control of the LED
Date: Sat, 16 Oct 2010 02:00:26 -0600 [thread overview]
Message-ID: <20101016080026.GF653@angua.secretlab.ca> (raw)
In-Reply-To: <1285946271-17728-5-git-send-email-bgat@billgatliff.com>
On Fri, Oct 01, 2010 at 10:17:46AM -0500, Bill Gatliff wrote:
> Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Ditto on description
Otherwise pretty straight forward. Looks okay to me.
g.
> ---
> drivers/leds/ledtrig-dim.c | 96 ++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 96 insertions(+), 0 deletions(-)
> create mode 100644 drivers/leds/ledtrig-dim.c
>
> diff --git a/drivers/leds/ledtrig-dim.c b/drivers/leds/ledtrig-dim.c
> new file mode 100644
> index 0000000..8f93f44
> --- /dev/null
> +++ b/drivers/leds/ledtrig-dim.c
> @@ -0,0 +1,96 @@
> +/*
> + * LED Dim Trigger
> + *
> + * Copyright (C) 2010 Bill Gatliff <bgat@billgatliff.com>
> + *
> + * "Dims" an LED based on system load. Derived from Atsushi Nemoto's
> + * ledtrig-heartbeat.c.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/init.h>
> +#include <linux/timer.h>
> +#include <linux/sched.h>
> +#include <linux/leds.h>
> +
> +#include "leds.h"
> +
> +struct dim_trig_data {
> + struct timer_list timer;
> +};
> +
> +
> +static void
> +led_dim_function(unsigned long data)
> +{
> + struct led_classdev *led_cdev = (struct led_classdev *)data;
> + struct dim_trig_data *dim_data = led_cdev->trigger_data;
> + unsigned int brightness;
> +
> + brightness = ((LED_FULL - LED_OFF) * avenrun[0]) / EXP_1;
> + if (brightness > LED_FULL)
> + brightness = LED_FULL;
> +
> + led_set_brightness(led_cdev, brightness);
> + mod_timer(&dim_data->timer, jiffies + msecs_to_jiffies(500));
> +}
> +
> +
> +static void
> +dim_trig_activate(struct led_classdev *led_cdev)
> +{
> + struct dim_trig_data *dim_data;
> +
> + dim_data = kzalloc(sizeof(*dim_data), GFP_KERNEL);
> + if (!dim_data)
> + return;
> +
> + led_cdev->trigger_data = dim_data;
> + setup_timer(&dim_data->timer,
> + led_dim_function, (unsigned long)led_cdev);
> + led_dim_function(dim_data->timer.data);
> +}
> +
> +
> +static void
> +dim_trig_deactivate(struct led_classdev *led_cdev)
> +{
> + struct dim_trig_data *dim_data = led_cdev->trigger_data;
> +
> + if (dim_data) {
> + del_timer_sync(&dim_data->timer);
> + kfree(dim_data);
> + }
> +}
> +
> +
> +static struct led_trigger dim_led_trigger = {
> + .name = "dim",
> + .activate = dim_trig_activate,
> + .deactivate = dim_trig_deactivate,
> +};
> +
> +
> +static int __init dim_trig_init(void)
> +{
> + return led_trigger_register(&dim_led_trigger);
> +}
> +module_init(dim_trig_init);
> +
> +
> +static void __exit dim_trig_exit(void)
> +{
> + led_trigger_unregister(&dim_led_trigger);
> +}
> +module_exit(dim_trig_exit);
> +
> +
> +MODULE_AUTHOR("Bill Gatliff <bgat@billgatliff.com>");
> +MODULE_DESCRIPTION("Dim LED trigger");
> +MODULE_LICENSE("GPL");
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-10-16 8:00 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-01 15:17 [PWM 01/10] API to consolidate PWM devices behind a common user and kernel interface Bill Gatliff
2010-10-01 15:17 ` [PWM 02/10] Emulates PWM hardware using a high-resolution timer and a GPIO pin Bill Gatliff
2010-10-16 6:54 ` Grant Likely
2010-10-01 15:17 ` [PWM 03/10] Expunge old Atmel PWMC driver, replacing it with one that conforms to the PWM API Bill Gatliff
2010-10-16 7:50 ` Grant Likely
2010-10-01 15:17 ` [PWM 04/10] Implements PWM-based LED control Bill Gatliff
2010-10-16 7:58 ` Grant Likely
2010-10-01 15:17 ` [PWM 05/10] LED "dim" trigger based on PWM control of the LED Bill Gatliff
2010-10-16 8:00 ` Grant Likely [this message]
2010-10-01 15:17 ` [PWM 06/10] Incorporate PWM API code into KBuild Bill Gatliff
2010-10-16 8:02 ` Grant Likely
2010-10-19 2:17 ` Bill Gatliff
2010-10-01 15:17 ` [PWM 07/10] PWM API driver for MPC52xx GPT peripheral Bill Gatliff
2010-10-01 15:17 ` [PWM 08/10] Initial support for PXA PWM peripheral; compile-tested only Bill Gatliff
2010-10-01 15:17 ` Bill Gatliff
2010-10-01 15:17 ` [PWM 09/10] Build pwm.o only if CONFIG_GENERIC_PWM is set Bill Gatliff
2010-10-01 15:17 ` [PWM 10/10] Expunge previous driver for PXA PWM Bill Gatliff
2010-10-01 22:00 ` [PWM 01/10] API to consolidate PWM devices behind a common user and kernel interface Kevin Hilman
2010-10-02 5:13 ` Jason Kridner
2010-10-06 18:45 ` Bill Gatliff
2010-10-06 19:08 ` Kevin Hilman
2010-10-02 12:25 ` Hector Oron
2010-10-06 18:48 ` Bill Gatliff
2010-10-16 6:05 ` Grant Likely
2010-10-05 10:35 ` sugumar
2010-10-06 18:50 ` Bill Gatliff
2010-10-06 19:02 ` Grosen, Mark
2010-10-07 7:58 ` Sugumar Natarajan
2010-10-16 7:42 ` Grant Likely
2010-10-20 18:13 ` Bill Gatliff
2010-10-20 18:34 ` Grant Likely
2010-10-20 19:32 ` Bill Gatliff
2010-10-21 13:18 ` Bill Gatliff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101016080026.GF653@angua.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=bgat@billgatliff.com \
--cc=linux-embedded@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).