From: Suresh Jayaraman <sjayaraman@suse.de>
To: Masahiro Tamori <masahiro.tamori@gmail.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>,
linux-nfs@vger.kernel.org, ltt-dev@lists.casi.polymtl.ca,
Trond.Myklebust@netapp.com, LKML <linux-kernel@vger.kernel.org>,
linux-embedded@vger.kernel.org
Subject: Re: [ltt-dev] [PATCH] nfs: add support for splice writes
Date: Mon, 20 Apr 2009 11:09:15 +0530 [thread overview]
Message-ID: <49EC0A83.8060802@suse.de> (raw)
In-Reply-To: <91e0b5050904020542l6b38d7a6hab6d7ef8b4593425@mail.gmail.com>
Hi Trond,
Do you think this patch is OK? Can this be considered for merging?
Thanks,
Masahiro Tamori wrote:
> Hello Suresh and Mathieu,
>
> 2009/4/2 Suresh Jayaraman <sjayaraman@suse.de>:
>> Mathieu Desnoyers wrote:
>>> * Suresh Jayaraman (sjayaraman@suse.de) wrote:
>>>> This patch attempts to add splice writes support. In essence, it just
>>>> calls generic_file_splice_write() after doing a little sanity check.
>>>> This would allow LTTng users that are using NFS to store trace data.
>>>> There could be more applications that could be benefitted too.
>>>>
>>>> I have tested this using the Jens' test program and have found no
>>>> real issues. The test program is inlined below:
>>>>
>>> There is just a small checkpatch nit that I'll fix directly in place in
>>> the LTTng tree.
>>>
>>> WARNING: %Ld/%Lu are not-standard C, use %lld/%llu
>>> #93: FILE: fs/nfs/file.c:564:
>>> + dprintk("NFS splice_write(%s/%s, %lu@%Lu)\n",
>>>
>>> total: 0 errors, 1 warnings, 42 lines checked
>>>
>> Yes, I noticed it. There are quite a few places in nfs code where we
>> happened to use that (that doesn't imply that it shouldn't be fixed), so
>> I thought it's OK.
>>
>>> That's great ! I'll pull it in the LTTng tree so my users can try it.
>>> They currently cannot write LTTng traces to NFS mounts anyway.
>> Yes, please report the test results. Would appreciate it very much.
>>
>>
>> Thanks,
>
> Thank you for creating a patch !!
>
> I tested it, and it works fine.
>
> My environment is following,
> LTTV 0.12.10
> LTTng 0.100
> LTT Control 0.65
> Kernles 2.6.29
>
> LTTng version is old now, but the test is passed on ARM11 target.
>
> Furthermore, I run the splice test and the test is passed too.
> The test code is copied from
> http://kzk9.net/blog/2007/05/splice2.html
> (Japanese page)
>
> Thanks all people who commented this issue.
>
> Best regards,
> Masahiro Tamori
>
>>>> diff --git a/fs/nfs/file.c b/fs/nfs/file.c
>>>> index 90f292b..13d6a00 100644
>>>> --- a/fs/nfs/file.c
>>>> +++ b/fs/nfs/file.c
>>>> @@ -47,6 +47,9 @@ static ssize_t nfs_file_splice_read(struct file *filp, loff_t *ppos,
>>>> size_t count, unsigned int flags);
>>>> static ssize_t nfs_file_read(struct kiocb *, const struct iovec *iov,
>>>> unsigned long nr_segs, loff_t pos);
>>>> +static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
>>>> + struct file *filp, loff_t *ppos,
>>>> + size_t count, unsigned int flags);
>>>> static ssize_t nfs_file_write(struct kiocb *, const struct iovec *iov,
>>>> unsigned long nr_segs, loff_t pos);
>>>> static int nfs_file_flush(struct file *, fl_owner_t id);
>>>> @@ -76,6 +79,7 @@ const struct file_operations nfs_file_operations = {
>>>> .lock = nfs_lock,
>>>> .flock = nfs_flock,
>>>> .splice_read = nfs_file_splice_read,
>>>> + .splice_write = nfs_file_splice_write,
>>>> .check_flags = nfs_check_flags,
>>>> .setlease = nfs_setlease,
>>>> };
>>>> @@ -550,6 +554,26 @@ out_swapfile:
>>>> goto out;
>>>> }
>>>>
>>>> +static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
>>>> + struct file *filp, loff_t *ppos,
>>>> + size_t count, unsigned int flags)
>>>> +{
>>>> + struct dentry *dentry = filp->f_path.dentry;
>>>> + struct inode *inode = dentry->d_inode;
>>>> +
>>>> + dprintk("NFS splice_write(%s/%s, %lu@%Lu)\n",
>>>> + dentry->d_parent->d_name.name, dentry->d_name.name,
>>>> + (unsigned long) count, (unsigned long long) *ppos);
>>>> +
>>>> + if (IS_SWAPFILE(inode)) {
>>>> + printk(KERN_INFO "NFS: attempt to write to active swap"
>>>> + "file!\n");
>>>> + return -EBUSY;
>>>> + }
>>>> +
>>>> + return generic_file_splice_write(pipe, filp, ppos, count, flags);
>>>> +}
>>>> +
>>>> static int do_getlk(struct file *filp, int cmd, struct file_lock *fl)
>>>> {
>>>> struct inode *inode = filp->f_mapping->host;
>>>>
>>
>> --
>> Suresh Jayaraman
>>
>> _______________________________________________
>> ltt-dev mailing list
>> ltt-dev@lists.casi.polymtl.ca
>> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Suresh Jayaraman
next prev parent reply other threads:[~2009-04-20 5:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-02 6:21 [PATCH] nfs: add support for splice writes Suresh Jayaraman
[not found] ` <49D45974.2060202-l3A5Bk7waGM@public.gmane.org>
2009-04-02 6:29 ` Mathieu Desnoyers
2009-04-02 6:32 ` Mathieu Desnoyers
2009-04-02 6:42 ` Suresh Jayaraman
2009-04-02 12:42 ` [ltt-dev] " Masahiro Tamori
2009-04-20 5:39 ` Suresh Jayaraman [this message]
2009-04-20 12:23 ` Trond Myklebust
[not found] ` <1240230224.8073.6.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-04-20 12:38 ` Suresh Jayaraman
2009-04-20 14:21 ` Trond Myklebust
2009-04-20 15:47 ` Suresh Jayaraman
2009-04-21 14:48 ` Christoph Hellwig
[not found] ` <20090421144810.GA7036-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
2009-04-21 17:35 ` Trond Myklebust
[not found] ` <1240335302.5390.20.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-04-21 18:48 ` Chuck Lever
2009-04-22 8:33 ` Suresh Jayaraman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49EC0A83.8060802@suse.de \
--to=sjayaraman@suse.de \
--cc=Trond.Myklebust@netapp.com \
--cc=compudj@krystal.dyndns.org \
--cc=linux-embedded@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=ltt-dev@lists.casi.polymtl.ca \
--cc=masahiro.tamori@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).