From: Marco <marco.stornelli@gmail.com>
To: Linux FS Devel <linux-fsdevel@vger.kernel.org>
Cc: Linux Embedded <linux-embedded@vger.kernel.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Daniel Walker <dwalker@soe.ucsc.edu>
Subject: [PATCH 08/14] Pramfs: Makefile and Kconfig
Date: Sat, 13 Jun 2009 15:22:10 +0200 [thread overview]
Message-ID: <4A33A802.8040507@gmail.com> (raw)
From: Marco Stornelli <marco.stornelli@gmail.com>
Makefile and Kconfig.
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
---
diff -uprN linux-2.6.30-orig/fs/Kconfig linux-2.6.30/fs/Kconfig
--- linux-2.6.30-orig/fs/Kconfig 2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/fs/Kconfig 2009-06-13 10:01:41.000000000 +0200
@@ -13,7 +13,7 @@ source "fs/ext4/Kconfig"
config FS_XIP
# execute in place
bool
- depends on EXT2_FS_XIP
+ depends on EXT2_FS_XIP || PRAMFS_XIP
default y
source "fs/jbd/Kconfig"
@@ -176,6 +176,7 @@ source "fs/romfs/Kconfig"
source "fs/sysv/Kconfig"
source "fs/ufs/Kconfig"
source "fs/exofs/Kconfig"
+source "fs/pramfs/Kconfig"
config NILFS2_FS
tristate "NILFS2 file system support (EXPERIMENTAL)"
diff -uprN linux-2.6.30-orig/fs/Makefile linux-2.6.30/fs/Makefile
--- linux-2.6.30-orig/fs/Makefile 2009-06-10 05:05:27.000000000 +0200
+++ linux-2.6.30/fs/Makefile 2009-06-13 10:00:26.000000000 +0200
@@ -124,3 +124,5 @@ obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
obj-$(CONFIG_EXOFS_FS) += exofs/
+obj-$(CONFIG_PRAMFS) += pramfs/
+
diff -uprN linux-2.6.30-orig/fs/pramfs/Kconfig linux-2.6.30/fs/pramfs/Kconfig
--- linux-2.6.30-orig/fs/pramfs/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/fs/pramfs/Kconfig 2009-04-22 15:22:54.000000000 +0200
@@ -0,0 +1,51 @@
+config PRAMFS
+ tristate "Persistent and Protected RAM file system support"
+ select PRAMFS_NOWP if PRAMFS=m
+ help
+ If your system has a block of fast (comparable in access speed to
+ system memory) and non-volatile RAM and you wish to mount a
+ light-weight, full-featured, and space-efficient filesystem over it,
+ say Y here, and read <file:Documentation/filesystems/pramfs.txt>.
+
+ To compile this as a module, choose M here: the module will be
+ called pramfs.
+
+config PRAMFS_XIP
+ bool "Enable Execute-in-place in PRAMFS"
+ depends on PRAMFS
+ select PRAMFS_NOWP
+ help
+ Say Y here to enable xip feature of PRAMFS.
+
+config PRAMFS_NOWP
+ bool "Disable PRAMFS write protection"
+ depends on PRAMFS
+ default n
+ help
+ Say Y here to disable the write protect feature of PRAMFS.
+
+config ROOT_PRAMFS
+ bool "Root file system on PRAMFS"
+ depends on PRAMFS && !ROOT_NFS
+ help
+ Say Y if you have enabled PRAMFS, and you want to be
+ able to use PRAMFS as the root filesystem. To actually
+ have the kernel mount PRAMFS as a root file system, you
+ must also pass the command line parameter
+ "root=/dev/null rootflags=physaddr=0x********" to the kernel
+ (replace 0x******** with the physical address location of the
+ previously initialized PRAMFS memory to boot with).
+
+config PRAMFS_TEST
+ boolean
+ depends on PRAMFS
+ default n
+
+config TEST_MODULE
+ tristate "PRAMFS Test"
+ depends on PRAMFS && m && !PRAMFS_NOWP
+ select PRAMFS_TEST
+ default n
+ help
+ Say Y here to build a simple module to test the protection of
+ PRAMFS. The module will be called pramfs_test.ko.
diff -uprN linux-2.6.30-orig/fs/pramfs/Makefile linux-2.6.30/fs/pramfs/Makefile
--- linux-2.6.30-orig/fs/pramfs/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.30/fs/pramfs/Makefile 2009-04-19 11:58:51.000000000 +0200
@@ -0,0 +1,13 @@
+#
+# Makefile for the linux pram-filesystem routines.
+#
+
+obj-$(CONFIG_PRAMFS) += pramfs.o
+obj-$(CONFIG_TEST_MODULE) += pramfs_test.o
+
+pramfs-objs := balloc.o dir.o file.o inode.o namei.o super.o symlink.o
+
+ifneq ($(CONFIG_PRAMFS_NOWP),y)
+pramfs-objs += wprotect.o
+endif
+pramfs-$(CONFIG_PRAMFS_XIP) += xip.o
next reply other threads:[~2009-06-13 13:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-13 13:22 Marco [this message]
2009-06-13 13:56 ` [PATCH 08/14] Pramfs: Makefile and Kconfig Sam Ravnborg
2009-06-14 7:15 ` Marco
2009-06-13 14:02 ` Daniel Walker
2009-06-14 7:16 ` Marco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A33A802.8040507@gmail.com \
--to=marco.stornelli@gmail.com \
--cc=dwalker@soe.ucsc.edu \
--cc=linux-embedded@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).