linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukas Czerner <lczerner@redhat.com>
To: linux-ext4@vger.kernel.org
Cc: dmonakhov@openvz.org, jmoyer@redhat.com, rwheeler@redhat.com,
	eshishki@redhat.com, sandeen@redhat.com, jack@suse.cz,
	tytso@mit.edu, lczerner@redhat.com
Subject: [PATCH 1/3] Add ioctl FITRIM.
Date: Fri,  6 Aug 2010 13:31:14 +0200	[thread overview]
Message-ID: <1281094276-11377-2-git-send-email-lczerner@redhat.com> (raw)
In-Reply-To: <1281094276-11377-1-git-send-email-lczerner@redhat.com>

Adds an filesystem independent ioctl to allow implementation of file
system batched discard support. It takes an array of three uint64_t
as an argument, the meaning of each item is as follows:

array[0] - (start) first Byte to trim
array[1] - (len) number of Bytes to trim from start
array[2] - (minlen) minimum extent length to trim, free extents shorter
than this number of Bytes will be ignored. This number will be rounded
up to the block size.

It is also possible to specify NULL as an argument. In this case the
arguments will set itself as follows:

args[0] = 0;
args[1] = LLONG_MAX;
args[2] = 0;

So it will trim the whole file system at one run.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
---
 fs/ioctl.c         |   34 ++++++++++++++++++++++++++++++++++
 include/linux/fs.h |    2 ++
 2 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/fs/ioctl.c b/fs/ioctl.c
index 2d140a7..a0e243c 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -540,6 +540,36 @@ static int ioctl_fsthaw(struct file *filp)
 	return thaw_super(sb);
 }
 
+static int ioctl_fstrim(struct file *filp, void __user *argp)
+{
+	struct super_block *sb = filp->f_path.dentry->d_inode->i_sb;
+	uint64_t args[3];
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	/* If filesystem doesn't support trim feature, return. */
+	if (sb->s_op->trim_fs == NULL)
+		return -EOPNOTSUPP;
+
+	/* If a blockdevice-backed filesystem isn't specified, return EINVAL. */
+	if (sb->s_bdev == NULL)
+		return -EINVAL;
+
+	if (argp == NULL) {
+		args[0] = 0;
+		args[1] = ULLONG_MAX;
+		args[2] = 0;
+	} else if (copy_from_user(args, argp, sizeof(args)))
+		return -EFAULT;
+
+	err = sb->s_op->trim_fs(sb, args[0], args[1], args[2]);
+	if (err)
+		return err;
+	return 0;
+}
+
 /*
  * When you add any new common ioctls to the switches above and below
  * please update compat_sys_ioctl() too.
@@ -590,6 +620,10 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		error = ioctl_fsthaw(filp);
 		break;
 
+	case FITRIM:
+		error = ioctl_fstrim(filp, argp);
+		break;
+
 	case FS_IOC_FIEMAP:
 		return ioctl_fiemap(filp, arg);
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e5106e4..0cc196f 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -316,6 +316,7 @@ struct inodes_stat_t {
 #define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
 #define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
 #define FITHAW		_IOWR('X', 120, int)	/* Thaw */
+#define FITRIM		_IOW('X', 121, uint64_t)/* Trim */
 
 #define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
 #define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
@@ -1582,6 +1583,7 @@ struct super_operations {
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
 #endif
 	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
+	int (*trim_fs) (struct super_block *, uint64_t, uint64_t, uint64_t);
 };
 
 /*
-- 
1.7.2


  reply	other threads:[~2010-08-06 11:32 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-06 11:31 [PATCH 0/3] Batched discard support Lukas Czerner
2010-08-06 11:31 ` Lukas Czerner [this message]
2010-08-06 11:31 ` [PATCH 2/3] Add batched discard support for ext3 Lukas Czerner
2010-08-06 11:31 ` [PATCH 3/3] Add batched discard support for ext4 Lukas Czerner
2010-08-06 13:03   ` Dmitry Monakhov
2010-08-06 13:23     ` Lukas Czerner
2010-08-07 22:25   ` Jan Kara
2010-08-10 11:32     ` Lukas Czerner
2010-08-06 13:05 ` [PATCH 0/3] Batched discard support Dmitry Monakhov
2010-08-06 13:49   ` Lukas Czerner
2010-08-06 14:24     ` Dmitry Monakhov
2010-08-06 14:32     ` Lukas Czerner
2010-08-06 15:02       ` Dmitry Monakhov
2010-08-10 11:31         ` Lukas Czerner
  -- strict thread matches above, loose matches on Subject: below --
2010-09-24 15:35 [PATCH 0/3 v. 8] Ext3/Ext4 " Lukas Czerner
2010-09-24 15:35 ` [PATCH 1/3] Add ioctl FITRIM Lukas Czerner
2010-09-24 17:03   ` Andreas Dilger
2010-09-27  9:20     ` Lukas Czerner
2010-08-10 14:19 [PATCH 0/3 ver. 7] Ext3/Ext4 Batched discard support Lukas Czerner
2010-08-10 14:19 ` [PATCH 1/3] Add ioctl FITRIM Lukas Czerner
2010-08-04 13:44 Lukas Czerner
2010-08-04 14:57 ` Dmitry Monakhov
2010-08-04 15:13   ` Lukas Czerner
2010-08-04 15:26     ` Greg Freemyer
2010-08-05  0:28       ` Ted Ts'o
2010-08-05  6:51         ` Dmitry Monakhov
2010-08-05 15:47         ` Andreas Dilger
2010-08-05  7:00     ` Dmitry Monakhov
2010-08-05  8:36       ` Lukas Czerner
2010-07-27 12:41 [PATCH 0/3 v3] Batched discard support for Ext3/Ext4 Lukas Czerner
2010-07-27 12:41 ` [PATCH 1/3] Add ioctl FITRIM Lukas Czerner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1281094276-11377-2-git-send-email-lczerner@redhat.com \
    --to=lczerner@redhat.com \
    --cc=dmonakhov@openvz.org \
    --cc=eshishki@redhat.com \
    --cc=jack@suse.cz \
    --cc=jmoyer@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=rwheeler@redhat.com \
    --cc=sandeen@redhat.com \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).