public inbox for linux-ext4@vger.kernel.org
 help / color / mirror / Atom feed
From: Dan Smith <danms@us.ibm.com>
To: danms@us.ibm.com
Cc: linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	Dave Hansen <dave@linux.vnet.ibm.com>,
	Oren Laadan <orenl@cs.columbia.edu>
Subject: [PATCH 18/19] c/r: add generic '->checkpoint' f_op to ext fses
Date: Tue, 14 Dec 2010 08:15:06 -0800	[thread overview]
Message-ID: <1292343307-7870-18-git-send-email-danms@us.ibm.com> (raw)
In-Reply-To: <1292343307-7870-1-git-send-email-danms@us.ibm.com>

From: Dave Hansen <dave@linux.vnet.ibm.com>

This marks ext[234] as being checkpointable.  There will be many
more to do this to, but this is a start.

Changelog[ckpt-v21]:
  - Put file_ops->checkpoint under CONFIG_CHECKPOINT
Changelog[ckpt-v19-rc3]:
  - Rebase to kernel 2.6.33 (ext2)
Changelog[v1]:
  - [Serge Hallyn] Use filemap_checkpoint() in ext4_file_vm_ops

Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Oren Laadan <orenl@cs.columbia.edu>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Tested-by: Serge E. Hallyn <serue@us.ibm.com>
---
 fs/ext2/dir.c  |    3 +++
 fs/ext2/file.c |    6 ++++++
 fs/ext3/dir.c  |    3 +++
 fs/ext3/file.c |    3 +++
 fs/ext4/dir.c  |    3 +++
 fs/ext4/file.c |    6 ++++++
 6 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 2709b34..7aefb74 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -721,4 +721,7 @@ const struct file_operations ext2_dir_operations = {
 	.compat_ioctl	= ext2_compat_ioctl,
 #endif
 	.fsync		= ext2_fsync,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif
 };
diff --git a/fs/ext2/file.c b/fs/ext2/file.c
index 49eec94..c8991c8 100644
--- a/fs/ext2/file.c
+++ b/fs/ext2/file.c
@@ -76,6 +76,9 @@ const struct file_operations ext2_file_operations = {
 	.fsync		= ext2_fsync,
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= generic_file_splice_write,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif /* CONFIG_CHECKPOINT */
 };
 
 #ifdef CONFIG_EXT2_FS_XIP
@@ -91,6 +94,9 @@ const struct file_operations ext2_xip_file_operations = {
 	.open		= dquot_file_open,
 	.release	= ext2_release_file,
 	.fsync		= ext2_fsync,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif /* CONFIG_CHECKPOINT */
 };
 #endif
 
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index e2e72c3..e2f5948 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -48,6 +48,9 @@ const struct file_operations ext3_dir_operations = {
 #endif
 	.fsync		= ext3_sync_file,	/* BKL held */
 	.release	= ext3_release_dir,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif
 };
 
 
diff --git a/fs/ext3/file.c b/fs/ext3/file.c
index f55df0e..2cf4ef2 100644
--- a/fs/ext3/file.c
+++ b/fs/ext3/file.c
@@ -68,6 +68,9 @@ const struct file_operations ext3_file_operations = {
 	.fsync		= ext3_sync_file,
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= generic_file_splice_write,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif
 };
 
 const struct inode_operations ext3_file_inode_operations = {
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index ece76fb..0101873 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -48,6 +48,9 @@ const struct file_operations ext4_dir_operations = {
 #endif
 	.fsync		= ext4_sync_file,
 	.release	= ext4_release_dir,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif
 };
 
 
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 5a5c55d..142dde6 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -86,6 +86,9 @@ ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
 static const struct vm_operations_struct ext4_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite   = ext4_page_mkwrite,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= filemap_checkpoint,
+#endif
 };
 
 static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
@@ -188,6 +191,9 @@ const struct file_operations ext4_file_operations = {
 	.fsync		= ext4_sync_file,
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= generic_file_splice_write,
+#ifdef CONFIG_CHECKPOINT
+	.checkpoint	= generic_file_checkpoint,
+#endif
 };
 
 const struct inode_operations ext4_file_inode_operations = {
-- 
1.7.2.2


       reply	other threads:[~2010-12-14 16:15 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1292343307-7870-1-git-send-email-danms@us.ibm.com>
2010-12-14 16:15 ` Dan Smith [this message]
2010-12-14 16:51   ` [PATCH 18/19] c/r: add generic '->checkpoint' f_op to ext fses Dan Smith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1292343307-7870-18-git-send-email-danms@us.ibm.com \
    --to=danms@us.ibm.com \
    --cc=dave@linux.vnet.ibm.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=orenl@cs.columbia.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox