linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukas Czerner <lczerner@redhat.com>
To: linux-ext4@vger.kernel.org
Cc: tytso@mit.edu, k-mio@sx.jp.nec.com, achender@linux.vnet.ibm.com,
	Lukas Czerner <lczerner@redhat.com>
Subject: [PATCH 1/2] ext4: Fix max file size and logical block counting of extent format file
Date: Fri,  3 Jun 2011 21:20:24 +0200	[thread overview]
Message-ID: <1307128825-3013-1-git-send-email-lczerner@redhat.com> (raw)

Kazuya Mio reported that he was able to hit BUG_ON(next == lblock)
in ext4_ext_put_gap_in_cache() while creating a sparse file in extent
format and fill the tail of file up to its end. We will hit the BUG_ON
when we write the last block (2^32-1) into the sparse file.

The root cause of the problem lies in the fact that we specifically set
s_maxbytes so that block at s_maxbytes fit into on-disk extent format,
which is 32 bit long. However, we are not storing start and end block
number, but rather start block number and length in blocks. It means
that in order to cover extent from 0 to EXT_MAX_BLOCK we need
EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) -
and it does not.

The only way to fix it without changing the meaning of the struct
ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes
by one fs block so we can cover the whole extent we can get by the
on-disk extent format.

Also in many places EXT_MAX_BLOCK is used as length instead of maximum
logical block number as the name suggests, it is all a bit messy. So
this commit renames it to EXT_MAX_BLOCKS and change its usage in some
places to actually be maximum number of blocks in the extent.

The bug which this commit fixes can be reproduced as follows:

 dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-2))
 sync
 dd if=/dev/zero of=/mnt/mp1/file bs=<blocksize> count=1 seek=$((2**32-1))

Reported-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
---
 fs/ext4/ext4_extents.h |    7 +++++--
 fs/ext4/extents.c      |   34 +++++++++++++++++-----------------
 fs/ext4/move_extent.c  |   10 +++++-----
 fs/ext4/super.c        |   15 ++++++++++++---
 4 files changed, 39 insertions(+), 27 deletions(-)

diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 2e29abb..4764146 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -133,8 +133,11 @@ typedef int (*ext_prepare_callback)(struct inode *, struct ext4_ext_path *,
 #define EXT_BREAK      1
 #define EXT_REPEAT     2
 
-/* Maximum logical block in a file; ext4_extent's ee_block is __le32 */
-#define EXT_MAX_BLOCK	0xffffffff
+/*
+ * Maximum number of logical blocks in a file; ext4_extent's ee_block is
+ * __le32.
+ */
+#define EXT_MAX_BLOCKS	0xffffffff
 
 /*
  * EXT_INIT_MAX_LEN is the maximum number of blocks we can have in an
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 5199bac..4157570 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1408,7 +1408,7 @@ got_index:
 
 /*
  * ext4_ext_next_allocated_block:
- * returns allocated block in subsequent extent or EXT_MAX_BLOCK.
+ * returns allocated block in subsequent extent or EXT_MAX_BLOCKS.
  * NOTE: it considers block number from index entry as
  * allocated block. Thus, index entries have to be consistent
  * with leaves.
@@ -1422,7 +1422,7 @@ ext4_ext_next_allocated_block(struct ext4_ext_path *path)
 	depth = path->p_depth;
 
 	if (depth == 0 && path->p_ext == NULL)
-		return EXT_MAX_BLOCK;
+		return EXT_MAX_BLOCKS;
 
 	while (depth >= 0) {
 		if (depth == path->p_depth) {
@@ -1439,12 +1439,12 @@ ext4_ext_next_allocated_block(struct ext4_ext_path *path)
 		depth--;
 	}
 
-	return EXT_MAX_BLOCK;
+	return EXT_MAX_BLOCKS;
 }
 
 /*
  * ext4_ext_next_leaf_block:
- * returns first allocated block from next leaf or EXT_MAX_BLOCK
+ * returns first allocated block from next leaf or EXT_MAX_BLOCKS
  */
 static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode,
 					struct ext4_ext_path *path)
@@ -1456,7 +1456,7 @@ static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode,
 
 	/* zero-tree has no leaf blocks at all */
 	if (depth == 0)
-		return EXT_MAX_BLOCK;
+		return EXT_MAX_BLOCKS;
 
 	/* go to index block */
 	depth--;
@@ -1469,7 +1469,7 @@ static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode,
 		depth--;
 	}
 
-	return EXT_MAX_BLOCK;
+	return EXT_MAX_BLOCKS;
 }
 
 /*
@@ -1677,13 +1677,13 @@ static unsigned int ext4_ext_check_overlap(struct inode *inode,
 	 */
 	if (b2 < b1) {
 		b2 = ext4_ext_next_allocated_block(path);
-		if (b2 == EXT_MAX_BLOCK)
+		if (b2 == EXT_MAX_BLOCKS)
 			goto out;
 	}
 
 	/* check for wrap through zero on extent logical start block*/
 	if (b1 + len1 < b1) {
-		len1 = EXT_MAX_BLOCK - b1;
+		len1 = EXT_MAX_BLOCKS - b1;
 		newext->ee_len = cpu_to_le16(len1);
 		ret = 1;
 	}
@@ -1767,7 +1767,7 @@ repeat:
 	fex = EXT_LAST_EXTENT(eh);
 	next = ext4_ext_next_leaf_block(inode, path);
 	if (le32_to_cpu(newext->ee_block) > le32_to_cpu(fex->ee_block)
-	    && next != EXT_MAX_BLOCK) {
+	    && next != EXT_MAX_BLOCKS) {
 		ext_debug("next leaf block - %d\n", next);
 		BUG_ON(npath != NULL);
 		npath = ext4_ext_find_extent(inode, next, NULL);
@@ -1887,7 +1887,7 @@ static int ext4_ext_walk_space(struct inode *inode, ext4_lblk_t block,
 	BUG_ON(func == NULL);
 	BUG_ON(inode == NULL);
 
-	while (block < last && block != EXT_MAX_BLOCK) {
+	while (block < last && block != EXT_MAX_BLOCKS) {
 		num = last - block;
 		/* find extent for this block */
 		down_read(&EXT4_I(inode)->i_data_sem);
@@ -2020,7 +2020,7 @@ ext4_ext_put_gap_in_cache(struct inode *inode, struct ext4_ext_path *path,
 	if (ex == NULL) {
 		/* there is no extent yet, so gap is [0;-] */
 		lblock = 0;
-		len = EXT_MAX_BLOCK;
+		len = EXT_MAX_BLOCKS;
 		ext_debug("cache gap(whole file):");
 	} else if (block < le32_to_cpu(ex->ee_block)) {
 		lblock = block;
@@ -2350,7 +2350,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 			 * never happen because at least one of the end points
 			 * needs to be on the edge of the extent.
 			 */
-			if (end == EXT_MAX_BLOCK) {
+			if (end == EXT_MAX_BLOCKS - 1) {
 				ext_debug("  bad truncate %u:%u\n",
 						start, end);
 				block = 0;
@@ -2398,7 +2398,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 			 * If this is a truncate, this condition
 			 * should never happen
 			 */
-			if (end == EXT_MAX_BLOCK) {
+			if (end == EXT_MAX_BLOCKS - 1) {
 				ext_debug("  bad truncate %u:%u\n",
 					start, end);
 				err = -EIO;
@@ -2478,7 +2478,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 		 * we need to remove it from the leaf
 		 */
 		if (num == 0) {
-			if (end != EXT_MAX_BLOCK) {
+			if (end != EXT_MAX_BLOCKS - 1) {
 				/*
 				 * For hole punching, we need to scoot all the
 				 * extents up when an extent is removed so that
@@ -3699,7 +3699,7 @@ void ext4_ext_truncate(struct inode *inode)
 
 	last_block = (inode->i_size + sb->s_blocksize - 1)
 			>> EXT4_BLOCK_SIZE_BITS(sb);
-	err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCK);
+	err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCKS - 1);
 
 	/* In a multi-transaction truncate, we only make the final
 	 * transaction synchronous.
@@ -4347,8 +4347,8 @@ int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 
 		start_blk = start >> inode->i_sb->s_blocksize_bits;
 		last_blk = (start + len - 1) >> inode->i_sb->s_blocksize_bits;
-		if (last_blk >= EXT_MAX_BLOCK)
-			last_blk = EXT_MAX_BLOCK-1;
+		if (last_blk >= EXT_MAX_BLOCKS)
+			last_blk = EXT_MAX_BLOCKS-1;
 		len_blks = ((ext4_lblk_t) last_blk) - start_blk + 1;
 
 		/*
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 2b8304b..f57455a 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -1002,12 +1002,12 @@ mext_check_arguments(struct inode *orig_inode,
 		return -EINVAL;
 	}
 
-	if ((orig_start > EXT_MAX_BLOCK) ||
-	    (donor_start > EXT_MAX_BLOCK) ||
-	    (*len > EXT_MAX_BLOCK) ||
-	    (orig_start + *len > EXT_MAX_BLOCK))  {
+	if ((orig_start >= EXT_MAX_BLOCKS) ||
+	    (donor_start >= EXT_MAX_BLOCKS) ||
+	    (*len > EXT_MAX_BLOCKS) ||
+	    (orig_start + *len >= EXT_MAX_BLOCKS))  {
 		ext4_debug("ext4 move extent: Can't handle over [%u] blocks "
-			"[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCK,
+			"[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCKS,
 			orig_inode->i_ino, donor_inode->i_ino);
 		return -EINVAL;
 	}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index cc5c157..9ea71aa 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2243,6 +2243,12 @@ static void ext4_orphan_cleanup(struct super_block *sb,
  * in the vfs.  ext4 inode has 48 bits of i_block in fsblock units,
  * so that won't be a limiting factor.
  *
+ * However there is other limiting factor. We do store extents in the form
+ * of starting block and length, hence the resulting length of the extent
+ * covering maximum file size must fit into on-disk format containers as
+ * well. Given that length is always by 1 unit bigger than max unit (because
+ * we count 0 as well) we have to lower the s_maxbytes by one fs block.
+ *
  * Note, this does *not* consider any metadata overhead for vfs i_blocks.
  */
 static loff_t ext4_max_size(int blkbits, int has_huge_files)
@@ -2264,10 +2270,13 @@ static loff_t ext4_max_size(int blkbits, int has_huge_files)
 		upper_limit <<= blkbits;
 	}
 
-	/* 32-bit extent-start container, ee_block */
-	res = 1LL << 32;
+	/*
+	 * 32-bit extent-start container, ee_block. We lower the maxbytes
+	 * by one fs block, so ee_len can cover the extent of maximum file
+	 * size
+	 */
+	res = (1LL << 32) - 1;
 	res <<= blkbits;
-	res -= 1;
 
 	/* Sanity check against vm- & vfs- imposed limits */
 	if (res > upper_limit)
-- 
1.7.4.4


             reply	other threads:[~2011-06-03 19:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-03 19:20 Lukas Czerner [this message]
2011-06-03 19:20 ` [PATCH 2/2] ext4: in fiemap use FIEMAP_EXTENT_LAST flag for last extent Lukas Czerner
2011-06-04  0:13   ` Allison Henderson
2011-06-06  4:09   ` Ted Ts'o
2011-06-06  4:09 ` [PATCH 1/2] ext4: Fix max file size and logical block counting of extent format file Ted Ts'o

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1307128825-3013-1-git-send-email-lczerner@redhat.com \
    --to=lczerner@redhat.com \
    --cc=achender@linux.vnet.ibm.com \
    --cc=k-mio@sx.jp.nec.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).