From: Lukas Czerner <lczerner@redhat.com>
To: linux-ext4@vger.kernel.org
Cc: Eric Sandeen <sandeen@redhat.com>,
tytso@mit.edu, Lukas Czerner <lczerner@redhat.com>
Subject: [PATCH v2] ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc
Date: Thu, 12 Jan 2012 12:03:44 +0100 [thread overview]
Message-ID: <1326366224-22885-1-git-send-email-lczerner@redhat.com> (raw)
In-Reply-To: <1326266607-15211-1-git-send-email-lczerner@redhat.com>
Ext4 does not support data journalling with delayed allocation enabled.
We even do not allow to mount the file system with delayed allocation
and data journalling enabled, however it can be set via FS_IOC_SETFLAGS
so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file
system mounted with delayed allocation (default) and that's where
problem arises. The easies way to reproduce this problem is with the
following set of commands:
mkfs.ext4 /dev/sdd
mount /dev/sdd /mnt/test1
dd if=/dev/zero of=/mnt/test1/file bs=1M count=4
chattr +j /mnt/test1/file
dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc
chattr -j /mnt/test1/file
Additionally it can be reproduced quite reliably with xfstests 272 and
269. In fact the above reproducer is a part of test 272.
To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if
the file system is mounted with delayed allocation. This can be easily
done by fixing ext4_should_*_data() functions do ignore data journal
flag when delalloc is set (suggested by Ted). We also have to set the
appropriate address space operations for the inode (again, ignoring data
journal flag if delalloc enabled).
Additionally this commit introduces ext4_inode_journal_mode() function
because ext4_should_*_data() has already had a lot of common code and
this change is putting it all into one function so it is easier to
read.
Successfully tested with xfstest in following configurations:
delalloc + data=ordered
delalloc + data=writeback
data=journal
nodelalloc + data=ordered
nodelalloc + data=writeback
nodelalloc + data=journal
(I wish we can get rid of the data=journal mode)
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
---
v2: - Change ORDER_DATA to ORDERED_DATA in flag name
- two tiny formatting changes
fs/ext4/ext4_jbd2.h | 55 ++++++++++++++++++++++++++-------------------------
fs/ext4/inode.c | 36 ++++++++++++++++++++-------------
2 files changed, 50 insertions(+), 41 deletions(-)
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index 5802fa1..137e4ba 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -261,43 +261,44 @@ static inline void ext4_update_inode_fsync_trans(handle_t *handle,
/* super.c */
int ext4_force_commit(struct super_block *sb);
-static inline int ext4_should_journal_data(struct inode *inode)
+/*
+ * Ext4 inode journal modes
+ */
+#define EXT4_INODE_JOURNAL_DATA_MODE 0x01 /* journal data mode */
+#define EXT4_INODE_ORDERED_DATA_MODE 0x02 /* ordered data mode */
+#define EXT4_INODE_WRITEBACK_DATA_MODE 0x04 /* writeback data mode */
+
+static inline int ext4_inode_journal_mode(struct inode *inode)
{
if (EXT4_JOURNAL(inode) == NULL)
- return 0;
- if (!S_ISREG(inode->i_mode))
- return 1;
- if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
- return 1;
- if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
- return 1;
- return 0;
+ return EXT4_INODE_WRITEBACK_DATA_MODE; /* writeback */
+ /* We do not support data journalling with delayed allocation */
+ if (!S_ISREG(inode->i_mode) ||
+ (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) ||
+ (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA) &&
+ !test_opt(inode->i_sb, DELALLOC)))
+ return EXT4_INODE_JOURNAL_DATA_MODE; /* journal data */
+ if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
+ return EXT4_INODE_ORDERED_DATA_MODE; /* ordered */
+ if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
+ return EXT4_INODE_WRITEBACK_DATA_MODE; /* writeback */
+ else
+ BUG();
+}
+
+static inline int ext4_should_journal_data(struct inode *inode)
+{
+ return ext4_inode_journal_mode(inode) & EXT4_INODE_JOURNAL_DATA_MODE;
}
static inline int ext4_should_order_data(struct inode *inode)
{
- if (EXT4_JOURNAL(inode) == NULL)
- return 0;
- if (!S_ISREG(inode->i_mode))
- return 0;
- if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
- return 0;
- if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
- return 1;
- return 0;
+ return ext4_inode_journal_mode(inode) & EXT4_INODE_ORDERED_DATA_MODE;
}
static inline int ext4_should_writeback_data(struct inode *inode)
{
- if (EXT4_JOURNAL(inode) == NULL)
- return 1;
- if (!S_ISREG(inode->i_mode))
- return 0;
- if (ext4_test_inode_flag(inode, EXT4_INODE_JOURNAL_DATA))
- return 0;
- if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
- return 1;
- return 0;
+ return ext4_inode_journal_mode(inode) & EXT4_INODE_WRITEBACK_DATA_MODE;
}
/*
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index aa8efa6..e56e23b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2479,13 +2479,14 @@ static int ext4_da_write_end(struct file *file,
int write_mode = (int)(unsigned long)fsdata;
if (write_mode == FALL_BACK_TO_NONDELALLOC) {
- if (ext4_should_order_data(inode)) {
+ switch (ext4_inode_journal_mode(inode)) {
+ case EXT4_INODE_ORDERED_DATA_MODE:
return ext4_ordered_write_end(file, mapping, pos,
len, copied, page, fsdata);
- } else if (ext4_should_writeback_data(inode)) {
+ case EXT4_INODE_WRITEBACK_DATA_MODE:
return ext4_writeback_write_end(file, mapping, pos,
len, copied, page, fsdata);
- } else {
+ default:
BUG();
}
}
@@ -3083,18 +3084,25 @@ static const struct address_space_operations ext4_da_aops = {
void ext4_set_aops(struct inode *inode)
{
- if (ext4_should_order_data(inode) &&
- test_opt(inode->i_sb, DELALLOC))
- inode->i_mapping->a_ops = &ext4_da_aops;
- else if (ext4_should_order_data(inode))
- inode->i_mapping->a_ops = &ext4_ordered_aops;
- else if (ext4_should_writeback_data(inode) &&
- test_opt(inode->i_sb, DELALLOC))
- inode->i_mapping->a_ops = &ext4_da_aops;
- else if (ext4_should_writeback_data(inode))
- inode->i_mapping->a_ops = &ext4_writeback_aops;
- else
+ switch (ext4_inode_journal_mode(inode)) {
+ case EXT4_INODE_ORDERED_DATA_MODE:
+ if (test_opt(inode->i_sb, DELALLOC))
+ inode->i_mapping->a_ops = &ext4_da_aops;
+ else
+ inode->i_mapping->a_ops = &ext4_ordered_aops;
+ break;
+ case EXT4_INODE_WRITEBACK_DATA_MODE:
+ if (test_opt(inode->i_sb, DELALLOC))
+ inode->i_mapping->a_ops = &ext4_da_aops;
+ else
+ inode->i_mapping->a_ops = &ext4_writeback_aops;
+ break;
+ case EXT4_INODE_JOURNAL_DATA_MODE:
inode->i_mapping->a_ops = &ext4_journalled_aops;
+ break;
+ default:
+ BUG();
+ }
}
--
1.7.4.4
next prev parent reply other threads:[~2012-01-12 11:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-11 7:23 [PATCH] ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delalloc Lukas Czerner
2012-01-11 9:20 ` Andreas Dilger
2012-01-11 9:51 ` Lukas Czerner
2012-01-11 18:13 ` Eric Sandeen
2012-01-12 7:12 ` Lukas Czerner
2012-01-12 11:03 ` Lukas Czerner [this message]
2012-01-19 16:50 ` [PATCH v2] " Ted Ts'o
2012-01-20 12:09 ` Lukas Czerner
2012-01-20 12:10 ` [PATCH v3] " Lukas Czerner
2012-01-23 22:47 ` Ted Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326366224-22885-1-git-send-email-lczerner@redhat.com \
--to=lczerner@redhat.com \
--cc=linux-ext4@vger.kernel.org \
--cc=sandeen@redhat.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).