From: Jan Kara <jack@suse.cz>
To: Ted Tso <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org, Jan Kara <jack@suse.cz>
Subject: [PATCH 07/29] jbd2: Refine waiting for shadow buffers
Date: Mon, 8 Apr 2013 23:32:12 +0200 [thread overview]
Message-ID: <1365456754-29373-8-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1365456754-29373-1-git-send-email-jack@suse.cz>
Currently when we add a buffer to a transaction, we wait until the
buffer is removed from BJ_Shadow list (so that we prevent any changes to
the buffer that is just written to the journal). This can take
unnecessarily long as a lot happens between the time the buffer is
submitted to the journal and the time when we remove the buffer from
BJ_Shadow list (e.g. we wait for all data buffers in the transaction,
we issue a cache flush etc.). Also this creates a dependency of
do_get_write_access() on transaction commit (namely waiting for data IO
to complete) which we want to avoid when implementing transaction
reservation.
So we modify commit code to set new BH_Shadow flag when temporary
shadowing buffer is created and we clear that flag once IO on that
buffer is complete. This allows do_get_write_access() to wait only for
BH_Shadow bit and thus removes the dependency on data IO completion.
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/jbd2/commit.c | 20 ++++++++++----------
fs/jbd2/journal.c | 2 ++
fs/jbd2/transaction.c | 44 +++++++++++++++++++-------------------------
include/linux/jbd.h | 25 +++++++++++++++++++++++++
include/linux/jbd2.h | 28 ++++++++++++++++++++++++++++
include/linux/jbd_common.h | 26 --------------------------
6 files changed, 84 insertions(+), 61 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 1a03762..4863f5b 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -30,15 +30,22 @@
#include <trace/events/jbd2.h>
/*
- * Default IO end handler for temporary BJ_IO buffer_heads.
+ * IO end handler for temporary buffer_heads handling writes to the journal.
*/
static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate)
{
+ struct buffer_head *orig_bh = bh->b_private;
+
BUFFER_TRACE(bh, "");
if (uptodate)
set_buffer_uptodate(bh);
else
clear_buffer_uptodate(bh);
+ if (orig_bh) {
+ clear_bit_unlock(BH_Shadow, &orig_bh->b_state);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&orig_bh->b_state, BH_Shadow);
+ }
unlock_buffer(bh);
}
@@ -818,7 +825,7 @@ start_journal_io:
jbd2_unfile_log_bh(bh);
/*
- * The list contains temporary buffer heads created by
+ * The list contains temporary buffer heas created by
* jbd2_journal_write_metadata_buffer().
*/
BUFFER_TRACE(bh, "dumping temporary bh");
@@ -831,6 +838,7 @@ start_journal_io:
bh = jh2bh(jh);
clear_buffer_jwrite(bh);
J_ASSERT_BH(bh, buffer_jbddirty(bh));
+ J_ASSERT_BH(bh, !buffer_shadow(bh));
/* The metadata is now released for reuse, but we need
to remember it against this transaction so that when
@@ -838,14 +846,6 @@ start_journal_io:
required. */
JBUFFER_TRACE(jh, "file as BJ_Forget");
jbd2_journal_file_buffer(jh, commit_transaction, BJ_Forget);
- /*
- * Wake up any transactions which were waiting for this IO to
- * complete. The barrier must be here so that changes by
- * jbd2_journal_file_buffer() take effect before wake_up_bit()
- * does the waitqueue check.
- */
- smp_mb();
- wake_up_bit(&bh->b_state, BH_Unshadow);
JBUFFER_TRACE(jh, "brelse shadowed buffer");
__brelse(bh);
}
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index e03aae0..e9a9cdb 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -453,6 +453,7 @@ repeat:
new_bh->b_size = bh_in->b_size;
new_bh->b_bdev = journal->j_dev;
new_bh->b_blocknr = blocknr;
+ new_bh->b_private = bh_in;
set_buffer_mapped(new_bh);
set_buffer_dirty(new_bh);
@@ -467,6 +468,7 @@ repeat:
spin_lock(&journal->j_list_lock);
__jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
spin_unlock(&journal->j_list_lock);
+ set_buffer_shadow(bh_in);
jbd_unlock_bh_state(bh_in);
return do_escape | (done_copy_out << 1);
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index bc35899..81df09c 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -620,6 +620,12 @@ static void warn_dirty_buffer(struct buffer_head *bh)
bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
}
+static int sleep_on_shadow_bh(void *word)
+{
+ io_schedule();
+ return 0;
+}
+
/*
* If the buffer is already part of the current transaction, then there
* is nothing we need to do. If it is already part of a prior
@@ -747,41 +753,29 @@ repeat:
* journaled. If the primary copy is already going to
* disk then we cannot do copy-out here. */
- if (jh->b_jlist == BJ_Shadow) {
- DEFINE_WAIT_BIT(wait, &bh->b_state, BH_Unshadow);
- wait_queue_head_t *wqh;
-
- wqh = bit_waitqueue(&bh->b_state, BH_Unshadow);
-
+ if (buffer_shadow(bh)) {
JBUFFER_TRACE(jh, "on shadow: sleep");
jbd_unlock_bh_state(bh);
- /* commit wakes up all shadow buffers after IO */
- for ( ; ; ) {
- prepare_to_wait(wqh, &wait.wait,
- TASK_UNINTERRUPTIBLE);
- if (jh->b_jlist != BJ_Shadow)
- break;
- schedule();
- }
- finish_wait(wqh, &wait.wait);
+ wait_on_bit(&bh->b_state, BH_Shadow,
+ sleep_on_shadow_bh, TASK_UNINTERRUPTIBLE);
goto repeat;
}
- /* Only do the copy if the currently-owning transaction
- * still needs it. If it is on the Forget list, the
- * committing transaction is past that stage. The
- * buffer had better remain locked during the kmalloc,
- * but that should be true --- we hold the journal lock
- * still and the buffer is already on the BUF_JOURNAL
- * list so won't be flushed.
+ /*
+ * Only do the copy if the currently-owning transaction still
+ * needs it. If buffer isn't on BJ_Metadata list, the
+ * committing transaction is past that stage (here we use the
+ * fact that BH_Shadow is set under bh_state lock together with
+ * refiling to BJ_Shadow list and at this point we know the
+ * buffer doesn't have BH_Shadow set).
*
* Subtle point, though: if this is a get_undo_access,
* then we will be relying on the frozen_data to contain
* the new value of the committed_data record after the
* transaction, so we HAVE to force the frozen_data copy
- * in that case. */
-
- if (jh->b_jlist != BJ_Forget || force_copy) {
+ * in that case.
+ */
+ if (jh->b_jlist == BJ_Metadata || force_copy) {
JBUFFER_TRACE(jh, "generate frozen data");
if (!frozen_buffer) {
JBUFFER_TRACE(jh, "allocate memory for buffer");
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index c8f3297..1c36b0c 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -244,6 +244,31 @@ typedef struct journal_superblock_s
#include <linux/fs.h>
#include <linux/sched.h>
+
+enum jbd_state_bits {
+ BH_JBD /* Has an attached ext3 journal_head */
+ = BH_PrivateStart,
+ BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
+ BH_Freed, /* Has been freed (truncated) */
+ BH_Revoked, /* Has been revoked from the log */
+ BH_RevokeValid, /* Revoked flag is valid */
+ BH_JBDDirty, /* Is dirty but journaled */
+ BH_State, /* Pins most journal_head state */
+ BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
+ BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
+ BH_JBDPrivateStart, /* First bit available for private use by FS */
+};
+
+BUFFER_FNS(JBD, jbd)
+BUFFER_FNS(JWrite, jwrite)
+BUFFER_FNS(JBDDirty, jbddirty)
+TAS_BUFFER_FNS(JBDDirty, jbddirty)
+BUFFER_FNS(Revoked, revoked)
+TAS_BUFFER_FNS(Revoked, revoked)
+BUFFER_FNS(RevokeValid, revokevalid)
+TAS_BUFFER_FNS(RevokeValid, revokevalid)
+BUFFER_FNS(Freed, freed)
+
#include <linux/jbd_common.h>
#define J_ASSERT(assert) BUG_ON(!(assert))
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 4584518..be5115f 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -302,6 +302,34 @@ typedef struct journal_superblock_s
#include <linux/fs.h>
#include <linux/sched.h>
+
+enum jbd_state_bits {
+ BH_JBD /* Has an attached ext3 journal_head */
+ = BH_PrivateStart,
+ BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
+ BH_Freed, /* Has been freed (truncated) */
+ BH_Revoked, /* Has been revoked from the log */
+ BH_RevokeValid, /* Revoked flag is valid */
+ BH_JBDDirty, /* Is dirty but journaled */
+ BH_State, /* Pins most journal_head state */
+ BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
+ BH_Shadow, /* IO on shadow buffer is running */
+ BH_Verified, /* Metadata block has been verified ok */
+ BH_JBDPrivateStart, /* First bit available for private use by FS */
+};
+
+BUFFER_FNS(JBD, jbd)
+BUFFER_FNS(JWrite, jwrite)
+BUFFER_FNS(JBDDirty, jbddirty)
+TAS_BUFFER_FNS(JBDDirty, jbddirty)
+BUFFER_FNS(Revoked, revoked)
+TAS_BUFFER_FNS(Revoked, revoked)
+BUFFER_FNS(RevokeValid, revokevalid)
+TAS_BUFFER_FNS(RevokeValid, revokevalid)
+BUFFER_FNS(Freed, freed)
+BUFFER_FNS(Shadow, shadow)
+BUFFER_FNS(Verified, verified)
+
#include <linux/jbd_common.h>
#define J_ASSERT(assert) BUG_ON(!(assert))
diff --git a/include/linux/jbd_common.h b/include/linux/jbd_common.h
index 6133679..b1f7089 100644
--- a/include/linux/jbd_common.h
+++ b/include/linux/jbd_common.h
@@ -1,32 +1,6 @@
#ifndef _LINUX_JBD_STATE_H
#define _LINUX_JBD_STATE_H
-enum jbd_state_bits {
- BH_JBD /* Has an attached ext3 journal_head */
- = BH_PrivateStart,
- BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
- BH_Freed, /* Has been freed (truncated) */
- BH_Revoked, /* Has been revoked from the log */
- BH_RevokeValid, /* Revoked flag is valid */
- BH_JBDDirty, /* Is dirty but journaled */
- BH_State, /* Pins most journal_head state */
- BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
- BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
- BH_Verified, /* Metadata block has been verified ok */
- BH_JBDPrivateStart, /* First bit available for private use by FS */
-};
-
-BUFFER_FNS(JBD, jbd)
-BUFFER_FNS(JWrite, jwrite)
-BUFFER_FNS(JBDDirty, jbddirty)
-TAS_BUFFER_FNS(JBDDirty, jbddirty)
-BUFFER_FNS(Revoked, revoked)
-TAS_BUFFER_FNS(Revoked, revoked)
-BUFFER_FNS(RevokeValid, revokevalid)
-TAS_BUFFER_FNS(RevokeValid, revokevalid)
-BUFFER_FNS(Freed, freed)
-BUFFER_FNS(Verified, verified)
next prev parent reply other threads:[~2013-04-08 21:33 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-08 21:32 [PATCH 00/22 v1] Fixes and improvements in ext4 writeback path Jan Kara
2013-04-08 21:32 ` [PATCH 01/29] ext4: Make ext4_bio_write_page() use BH_Async_Write flags instead page pointers from ext4_io_end Jan Kara
2013-04-10 18:05 ` Dmitry Monakhov
2013-04-11 13:38 ` Zheng Liu
2013-04-12 3:50 ` Theodore Ts'o
2013-04-08 21:32 ` [PATCH 02/29] ext4: Use io_end for multiple bios Jan Kara
2013-04-11 5:10 ` Dmitry Monakhov
2013-04-11 14:04 ` Zheng Liu
2013-04-12 3:55 ` Theodore Ts'o
2013-04-08 21:32 ` [PATCH 03/29] ext4: Clear buffer_uninit flag when submitting IO Jan Kara
2013-04-11 14:08 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 04/29] jbd2: Reduce journal_head size Jan Kara
2013-04-11 14:10 ` Zheng Liu
2013-04-12 4:04 ` Theodore Ts'o
2013-04-08 21:32 ` [PATCH 05/29] jbd2: Don't create journal_head for temporary journal buffers Jan Kara
2013-04-12 8:01 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 06/29] jbd2: Remove journal_head from descriptor buffers Jan Kara
2013-04-12 8:10 ` Zheng Liu
2013-04-08 21:32 ` Jan Kara [this message]
2013-05-03 14:16 ` [PATCH 07/29] jbd2: Refine waiting for shadow buffers Zheng Liu
2013-05-03 20:44 ` Jan Kara
2013-04-08 21:32 ` [PATCH 08/29] jbd2: Remove outdated comment Jan Kara
2013-05-03 14:20 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 09/29] jbd2: Cleanup needed free block estimates when starting a transaction Jan Kara
2013-05-05 8:17 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 10/29] jbd2: Fix race in t_outstanding_credits update in jbd2_journal_extend() Jan Kara
2013-05-05 8:37 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 11/29] jbd2: Remove unused waitqueues Jan Kara
2013-05-05 8:41 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 12/29] jbd2: Transaction reservation support Jan Kara
2013-05-05 9:39 ` Zheng Liu
2013-05-06 12:49 ` Jan Kara
2013-05-07 5:22 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 13/29] ext4: Provide wrappers for transaction reservation calls Jan Kara
2013-05-05 11:51 ` Zheng Liu
2013-05-05 11:58 ` Zheng Liu
2013-05-06 12:51 ` Jan Kara
2013-04-08 21:32 ` [PATCH 14/29] ext4: Stop messing with nr_to_write in ext4_da_writepages() Jan Kara
2013-05-05 12:40 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 15/29] ext4: Deprecate max_writeback_mb_bump sysfs attribute Jan Kara
2013-05-05 12:47 ` Zheng Liu
2013-05-06 12:55 ` Jan Kara
2013-04-08 21:32 ` [PATCH 16/29] ext4: Improve writepage credit estimate for files with indirect blocks Jan Kara
2013-05-07 5:39 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 17/29] ext4: Better estimate credits needed for ext4_da_writepages() Jan Kara
2013-05-07 6:33 ` Zheng Liu
2013-05-07 14:17 ` Jan Kara
2013-04-08 21:32 ` [PATCH 18/29] ext4: Restructure writeback path Jan Kara
2013-05-08 3:48 ` Zheng Liu
2013-05-08 11:20 ` Jan Kara
2013-04-08 21:32 ` [PATCH 19/29] ext4: Remove buffer_uninit handling Jan Kara
2013-05-08 6:56 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 20/29] ext4: Use transaction reservation for extent conversion in ext4_end_io Jan Kara
2013-05-08 6:57 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 21/29] ext4: Split extent conversion lists to reserved & unreserved parts Jan Kara
2013-05-08 7:03 ` Zheng Liu
2013-05-08 11:23 ` Jan Kara
2013-05-08 11:49 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 22/29] ext4: Defer clearing of PageWriteback after extent conversion Jan Kara
2013-05-08 7:08 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 23/29] ext4: Protect extent conversion after DIO with i_dio_count Jan Kara
2013-05-08 7:08 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 24/29] ext4: Remove wait for unwritten extent conversion from ext4_ext_truncate() Jan Kara
2013-05-08 7:35 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 25/29] ext4: Use generic_file_fsync() in ext4_file_fsync() in nojournal mode Jan Kara
2013-05-08 7:37 ` Zheng Liu
2013-05-08 11:29 ` Jan Kara
2013-04-08 21:32 ` [PATCH 26/29] ext4: Remove i_mutex from ext4_file_sync() Jan Kara
2013-05-08 7:41 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 27/29] ext4: Remove wait for unwritten extents in ext4_ind_direct_IO() Jan Kara
2013-05-08 7:55 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 28/29] ext4: Don't wait for extent conversion in ext4_ext_punch_hole() Jan Kara
2013-05-08 7:56 ` Zheng Liu
2013-04-08 21:32 ` [PATCH 29/29] ext4: Remove ext4_ioend_wait() Jan Kara
2013-05-08 7:57 ` Zheng Liu
2013-05-08 11:32 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365456754-29373-8-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).