* [PATCH V3 01/11] mke2fs: add the ability to copy files from a given directory
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
@ 2013-12-27 9:08 ` Robert Yang
2013-12-27 9:08 ` [PATCH V3 02/11] misc/create_inode.c: copy files recursively Robert Yang
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:08 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
We will add a -d option which will be used for adding the files from a
given directory to the filesystem, it is similiar to genext2fs, but
genext2fs doesn't fully support ext4.
* We already have the basic operations in debugfs:
- Copy regular file
- Create directory
- Create symlink
- Create special file
We will move these operations into create_inode.h and create_inode.c,
then let both mke2fs and debugfs use them.
* What we need to do are:
- Copy the given directory recursively, this will be done by the
populate_fs()
- Set the owner, mode and other informations
- Handle the hard links
TODO:
- The libext2fs can't create the socket file (S_IFSOCK), do we have a
plan to support it ?
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 26 ++++++++++++++++++++++++++
misc/create_inode.h | 17 +++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 misc/create_inode.c
create mode 100644 misc/create_inode.h
diff --git a/misc/create_inode.c b/misc/create_inode.c
new file mode 100644
index 0000000..46aaa60
--- /dev/null
+++ b/misc/create_inode.c
@@ -0,0 +1,26 @@
+#include "create_inode.h"
+
+/* Make a special file which is block, character and fifo */
+errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st)
+{
+}
+
+/* Make a symlink name -> target */
+errcode_t do_symlink_internal(ext2_ino_t cwd, const char *name, char *target)
+{
+}
+
+/* Make a directory in the fs */
+errcode_t do_mkdir_internal(ext2_ino_t cwd, const char *name, struct stat *st)
+{
+}
+
+/* Copy the native file to the fs */
+errcode_t do_write_internal(ext2_ino_t cwd, const char *src, const char *dest)
+{
+}
+
+/* Copy files from source_dir to fs */
+errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir)
+{
+}
diff --git a/misc/create_inode.h b/misc/create_inode.h
new file mode 100644
index 0000000..9fc97fa
--- /dev/null
+++ b/misc/create_inode.h
@@ -0,0 +1,17 @@
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include "et/com_err.h"
+#include "e2p/e2p.h"
+#include "ext2fs/ext2fs.h"
+#include "nls-enable.h"
+
+ext2_filsys current_fs;
+ext2_ino_t root;
+
+/* For populating the filesystem */
+extern errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir);
+extern errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st);
+extern errcode_t do_symlink_internal(ext2_ino_t cwd, const char *name, char *target);
+extern errcode_t do_mkdir_internal(ext2_ino_t cwd, const char *name, struct stat *st);
+extern errcode_t do_write_internal(ext2_ino_t cwd, const char *src, const char *dest);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 02/11] misc/create_inode.c: copy files recursively
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
2013-12-27 9:08 ` [PATCH V3 01/11] mke2fs: add the ability to copy files from a given directory Robert Yang
@ 2013-12-27 9:08 ` Robert Yang
2013-12-27 9:08 ` [PATCH V3 03/11] misc/create_inode.c: create special file Robert Yang
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:08 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
Use opendir() and readdir() to read the native directory, then use
lstat() to identify the file type and call the corresponding function to
add the file to the filesystem, call the populate_fs() recursively if it
is a directory.
NOTE: the libext2fs can't create the socket file.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 97 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index 46aaa60..7f98499 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -1,5 +1,13 @@
#include "create_inode.h"
+#if __STDC_VERSION__ < 199901L
+# if __GNUC__ >= 2
+# define __func__ __FUNCTION__
+# else
+# define __func__ "<unknown>"
+# endif
+#endif
+
/* Make a special file which is block, character and fifo */
errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st)
{
@@ -23,4 +31,93 @@ errcode_t do_write_internal(ext2_ino_t cwd, const char *src, const char *dest)
/* Copy files from source_dir to fs */
errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir)
{
+ const char *name;
+ DIR *dh;
+ struct dirent *dent;
+ struct stat st;
+ char ln_target[PATH_MAX];
+ ext2_ino_t ino;
+ errcode_t retval;
+ int read_cnt;
+
+ root = EXT2_ROOT_INO;
+
+ if (chdir(source_dir) < 0) {
+ com_err(__func__, errno,
+ _("while changing working directory to \"%s\""), source_dir);
+ return errno;
+ }
+
+ if (!(dh = opendir("."))) {
+ com_err(__func__, errno,
+ _("while openning directory \"%s\""), source_dir);
+ return errno;
+ }
+
+ while((dent = readdir(dh))) {
+ if((!strcmp(dent->d_name, ".")) || (!strcmp(dent->d_name, "..")))
+ continue;
+ lstat(dent->d_name, &st);
+ name = dent->d_name;
+
+ switch(st.st_mode & S_IFMT) {
+ case S_IFCHR:
+ case S_IFBLK:
+ case S_IFIFO:
+ if ((retval = do_mknod_internal(parent_ino, name, &st))) {
+ com_err(__func__, retval,
+ _("while creating special file \"%s\""), name);
+ return retval;
+ }
+ break;
+ case S_IFSOCK:
+ /* FIXME: there is no make socket function atm. */
+ com_err(__func__, 0,
+ _("ignoring socket file\"%s\""), name);
+ break;
+ case S_IFLNK:
+ if((read_cnt = readlink(name, ln_target, sizeof(ln_target))) == -1) {
+ com_err(__func__, errno,
+ _("while trying to readlink \"%s\""), name);
+ return errno;
+ }
+ ln_target[read_cnt] = '\0';
+ if ((retval = do_symlink_internal(parent_ino, name, ln_target))) {
+ com_err(__func__, retval,
+ _("while writing symlink\"%s\""), name);
+ return retval;
+ }
+ break;
+ case S_IFREG:
+ if ((retval = do_write_internal(parent_ino, name, name))) {
+ com_err(__func__, retval,
+ _("while writing file \"%s\""), name);
+ return retval;
+ }
+ break;
+ case S_IFDIR:
+ if ((retval = do_mkdir_internal(parent_ino, name, &st))) {
+ com_err(__func__, retval,
+ _("while making dir \"%s\""), name);
+ return retval;
+ }
+ if ((retval = ext2fs_namei(current_fs, root, parent_ino, name, &ino))) {
+ com_err(name, retval, 0);
+ return retval;
+ }
+ /* Populate the dir recursively*/
+ retval = populate_fs(ino, name);
+ if (retval) {
+ com_err(__func__, retval, _("while adding dir \"%s\""), name);
+ return retval;
+ }
+ chdir("..");
+ break;
+ default:
+ com_err(__func__, 0,
+ _("ignoring entry \"%s\""), name);
+ }
+ }
+ closedir(dh);
+ return retval;
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 03/11] misc/create_inode.c: create special file
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
2013-12-27 9:08 ` [PATCH V3 01/11] mke2fs: add the ability to copy files from a given directory Robert Yang
2013-12-27 9:08 ` [PATCH V3 02/11] misc/create_inode.c: copy files recursively Robert Yang
@ 2013-12-27 9:08 ` Robert Yang
2013-12-27 9:08 ` [PATCH V3 04/11] misc/create_inode.c: create symlink Robert Yang
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:08 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
The do_mknod_internal() is used for creating special file which is
block, character and fifo, most of the code are from debugfs/debugfs.c,
the debugfs/debugfs.c will be modified to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index 7f98499..cea37c9 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -11,6 +11,78 @@
/* Make a special file which is block, character and fifo */
errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st)
{
+ ext2_ino_t ino;
+ errcode_t retval;
+ struct ext2_inode inode;
+ unsigned long major, minor, mode;
+ int filetype;
+
+ switch(st->st_mode & S_IFMT) {
+ case S_IFCHR:
+ mode = LINUX_S_IFCHR;
+ filetype = EXT2_FT_CHRDEV;
+ break;
+ case S_IFBLK:
+ mode = LINUX_S_IFBLK;
+ filetype = EXT2_FT_BLKDEV;
+ break;
+ case S_IFIFO:
+ mode = LINUX_S_IFIFO;
+ filetype = EXT2_FT_FIFO;
+ break;
+ }
+
+ if (!(current_fs->flags & EXT2_FLAG_RW)) {
+ com_err(__func__, 0, "Filesystem opened read/only");
+ return -1;
+ }
+ retval = ext2fs_new_inode(current_fs, cwd, 010755, 0, &ino);
+ if (retval) {
+ com_err(__func__, retval, 0);
+ return retval;
+ }
+
+#ifdef DEBUGFS
+ printf("Allocated inode: %u\n", ino);
+#endif
+ retval = ext2fs_link(current_fs, cwd, name, ino, filetype);
+ if (retval == EXT2_ET_DIR_NO_SPACE) {
+ retval = ext2fs_expand_dir(current_fs, cwd);
+ if (retval) {
+ com_err(__func__, retval, "while expanding directory");
+ return retval;
+ }
+ retval = ext2fs_link(current_fs, cwd, name, ino, filetype);
+ }
+ if (retval) {
+ com_err(name, retval, 0);
+ return -1;
+ }
+ if (ext2fs_test_inode_bitmap2(current_fs->inode_map, ino))
+ com_err(__func__, 0, "Warning: inode already set");
+ ext2fs_inode_alloc_stats2(current_fs, ino, +1, 0);
+ memset(&inode, 0, sizeof(inode));
+ inode.i_mode = mode;
+ inode.i_atime = inode.i_ctime = inode.i_mtime =
+ current_fs->now ? current_fs->now : time(0);
+
+ major = major(st->st_rdev);
+ minor = minor(st->st_rdev);
+
+ if ((major < 256) && (minor < 256)) {
+ inode.i_block[0] = major * 256 + minor;
+ inode.i_block[1] = 0;
+ } else {
+ inode.i_block[0] = 0;
+ inode.i_block[1] = (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
+ }
+ inode.i_links_count = 1;
+
+ retval = ext2fs_write_new_inode(current_fs, ino, &inode);
+ if (retval)
+ com_err(__func__, retval, "while creating inode %u", ino);
+
+ return retval;
}
/* Make a symlink name -> target */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 04/11] misc/create_inode.c: create symlink
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (2 preceding siblings ...)
2013-12-27 9:08 ` [PATCH V3 03/11] misc/create_inode.c: create special file Robert Yang
@ 2013-12-27 9:08 ` Robert Yang
2013-12-27 9:08 ` [PATCH V3 05/11] misc/create_inode.c: copy regular file Robert Yang
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:08 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
The do_symlink_internal() is used for creating symlinks, most of the
code are from debugfs/debugfs.c, the debugfs/debugfs.c will be modified
to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index cea37c9..20bfb80 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -88,6 +88,38 @@ errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st)
/* Make a symlink name -> target */
errcode_t do_symlink_internal(ext2_ino_t cwd, const char *name, char *target)
{
+ char *cp;
+ ext2_ino_t parent_ino;
+ errcode_t retval;
+ struct ext2_inode inode;
+ struct stat st;
+
+ cp = strrchr(name, '/');
+ if (cp) {
+ *cp = 0;
+ if ((retval = ext2fs_namei(current_fs, root, cwd, name, &parent_ino))){
+ com_err(name, retval, 0);
+ return retval;
+ }
+ name = cp+1;
+ } else
+ parent_ino = cwd;
+
+try_again:
+ retval = ext2fs_symlink(current_fs, parent_ino, 0, name, target);
+ if (retval == EXT2_ET_DIR_NO_SPACE) {
+ retval = ext2fs_expand_dir(current_fs, parent_ino);
+ if (retval) {
+ com_err("do_symlink_internal", retval, "while expanding directory");
+ return retval;
+ }
+ goto try_again;
+ }
+ if (retval) {
+ com_err("ext2fs_symlink", retval, 0);
+ return retval;
+ }
+
}
/* Make a directory in the fs */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 05/11] misc/create_inode.c: copy regular file
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (3 preceding siblings ...)
2013-12-27 9:08 ` [PATCH V3 04/11] misc/create_inode.c: create symlink Robert Yang
@ 2013-12-27 9:08 ` Robert Yang
2013-12-27 9:09 ` [PATCH V3 06/11] misc/create_inode.c: create directory Robert Yang
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:08 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
The do_write_internal() is used for copying file from native fs to
target, most of the code are from debugfs/debugfs.c, the
debugfs/debugfs.c will be modified to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 183 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 183 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index 20bfb80..cea0109 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -8,6 +8,16 @@
# endif
#endif
+/* 64KiB is the minimium blksize to best minimize system call overhead. */
+#ifndef IO_BUFSIZE
+#define IO_BUFSIZE 64*1024
+#endif
+
+/* Block size for `st_blocks' */
+#ifndef S_BLKSIZE
+#define S_BLKSIZE 512
+#endif
+
/* Make a special file which is block, character and fifo */
errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st)
{
@@ -127,9 +137,182 @@ errcode_t do_mkdir_internal(ext2_ino_t cwd, const char *name, struct stat *st)
{
}
+static errcode_t copy_file(int fd, ext2_ino_t newfile, int bufsize, int make_holes)
+{
+ ext2_file_t e2_file;
+ errcode_t retval;
+ int got;
+ unsigned int written;
+ char *buf;
+ char *ptr;
+ char *zero_buf;
+ int cmp;
+
+ retval = ext2fs_file_open(current_fs, newfile,
+ EXT2_FILE_WRITE, &e2_file);
+ if (retval)
+ return retval;
+
+ retval = ext2fs_get_mem(bufsize, &buf);
+ if (retval) {
+ com_err("copy_file", retval, "can't allocate buffer\n");
+ return retval;
+ }
+
+ /* This is used for checking whether the whole block is zero */
+ retval = ext2fs_get_memzero(bufsize, &zero_buf);
+ if (retval) {
+ com_err("copy_file", retval, "can't allocate buffer\n");
+ ext2fs_free_mem(&buf);
+ return retval;
+ }
+
+ while (1) {
+ got = read(fd, buf, bufsize);
+ if (got == 0)
+ break;
+ if (got < 0) {
+ retval = errno;
+ goto fail;
+ }
+ ptr = buf;
+
+ /* Sparse copy */
+ if (make_holes) {
+ /* Check whether all is zero */
+ cmp = memcmp(ptr, zero_buf, got);
+ if (cmp == 0) {
+ /* The whole block is zero, make a hole */
+ retval = ext2fs_file_lseek(e2_file, got, EXT2_SEEK_CUR, NULL);
+ if (retval)
+ goto fail;
+ got = 0;
+ }
+ }
+
+ /* Normal copy */
+ while (got > 0) {
+ retval = ext2fs_file_write(e2_file, ptr,
+ got, &written);
+ if (retval)
+ goto fail;
+
+ got -= written;
+ ptr += written;
+ }
+ }
+ ext2fs_free_mem(&buf);
+ ext2fs_free_mem(&zero_buf);
+ retval = ext2fs_file_close(e2_file);
+ return retval;
+
+fail:
+ ext2fs_free_mem(&buf);
+ ext2fs_free_mem(&zero_buf);
+ (void) ext2fs_file_close(e2_file);
+ return retval;
+}
+
/* Copy the native file to the fs */
errcode_t do_write_internal(ext2_ino_t cwd, const char *src, const char *dest)
{
+ int fd;
+ struct stat statbuf;
+ ext2_ino_t newfile;
+ errcode_t retval;
+ struct ext2_inode inode;
+ int bufsize = IO_BUFSIZE;
+ int make_holes = 0;
+
+ fd = open(src, O_RDONLY);
+ if (fd < 0) {
+ com_err(src, errno, 0);
+ return errno;
+ }
+ if (fstat(fd, &statbuf) < 0) {
+ com_err(src, errno, 0);
+ close(fd);
+ return errno;
+ }
+
+ retval = ext2fs_namei(current_fs, root, cwd, dest, &newfile);
+ if (retval == 0) {
+ com_err(__func__, 0, "The file '%s' already exists\n", dest);
+ close(fd);
+ return errno;
+ }
+
+ retval = ext2fs_new_inode(current_fs, cwd, 010755, 0, &newfile);
+ if (retval) {
+ com_err(__func__, retval, 0);
+ close(fd);
+ return errno;
+ }
+#ifdef DEBUGFS
+ printf("Allocated inode: %u\n", newfile);
+#endif
+ retval = ext2fs_link(current_fs, cwd, dest, newfile,
+ EXT2_FT_REG_FILE);
+ if (retval == EXT2_ET_DIR_NO_SPACE) {
+ retval = ext2fs_expand_dir(current_fs, cwd);
+ if (retval) {
+ com_err(__func__, retval, "while expanding directory");
+ close(fd);
+ return errno;
+ }
+ retval = ext2fs_link(current_fs, cwd, dest, newfile,
+ EXT2_FT_REG_FILE);
+ }
+ if (retval) {
+ com_err(dest, retval, 0);
+ close(fd);
+ return errno;
+ }
+ if (ext2fs_test_inode_bitmap2(current_fs->inode_map, newfile))
+ com_err(__func__, 0, "Warning: inode already set");
+ ext2fs_inode_alloc_stats2(current_fs, newfile, +1, 0);
+ memset(&inode, 0, sizeof(inode));
+ inode.i_mode = (statbuf.st_mode & ~LINUX_S_IFMT) | LINUX_S_IFREG;
+ inode.i_atime = inode.i_ctime = inode.i_mtime =
+ current_fs->now ? current_fs->now : time(0);
+ inode.i_links_count = 1;
+ inode.i_size = statbuf.st_size;
+ if (current_fs->super->s_feature_incompat &
+ EXT3_FEATURE_INCOMPAT_EXTENTS) {
+ int i;
+ struct ext3_extent_header *eh;
+
+ eh = (struct ext3_extent_header *) &inode.i_block[0];
+ eh->eh_depth = 0;
+ eh->eh_entries = 0;
+ eh->eh_magic = ext2fs_cpu_to_le16(EXT3_EXT_MAGIC);
+ i = (sizeof(inode.i_block) - sizeof(*eh)) /
+ sizeof(struct ext3_extent);
+ eh->eh_max = ext2fs_cpu_to_le16(i);
+ inode.i_flags |= EXT4_EXTENTS_FL;
+ }
+
+ if ((retval = ext2fs_write_new_inode(current_fs, newfile, &inode))) {
+ com_err(__func__, retval, "while creating inode %u", newfile);
+ close(fd);
+ return errno;
+ }
+ if (LINUX_S_ISREG(inode.i_mode)) {
+ if (statbuf.st_blocks < statbuf.st_size / S_BLKSIZE) {
+ make_holes = 1;
+ /*
+ * Use I/O blocksize as buffer size when
+ * copying sparse files.
+ */
+ bufsize = statbuf.st_blksize;
+ }
+ retval = copy_file(fd, newfile, bufsize, make_holes);
+ if (retval)
+ com_err("copy_file", retval, 0);
+ }
+ close(fd);
+
+ return 0;
}
/* Copy files from source_dir to fs */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 06/11] misc/create_inode.c: create directory
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (4 preceding siblings ...)
2013-12-27 9:08 ` [PATCH V3 05/11] misc/create_inode.c: copy regular file Robert Yang
@ 2013-12-27 9:09 ` Robert Yang
2013-12-27 9:09 ` [PATCH V3 07/11] misc/create_inode.c: set owner/mode/time for the inode Robert Yang
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:09 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
The do_mkdir_internal() is used for making dir on the target fs, most of
the code are from debugfs/debugfs.c, the debugfs/debugfs.c will be
modified to use this function.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index cea0109..15d0f17 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -135,6 +135,37 @@ try_again:
/* Make a directory in the fs */
errcode_t do_mkdir_internal(ext2_ino_t cwd, const char *name, struct stat *st)
{
+ char *cp;
+ ext2_ino_t parent_ino, ino;
+ errcode_t retval;
+ struct ext2_inode inode;
+
+
+ cp = strrchr(name, '/');
+ if (cp) {
+ *cp = 0;
+ if ((retval = ext2fs_namei(current_fs, root, cwd, name, &parent_ino))){
+ com_err(name, retval, 0);
+ return retval;
+ }
+ name = cp+1;
+ } else
+ parent_ino = cwd;
+
+try_again:
+ retval = ext2fs_mkdir(current_fs, parent_ino, 0, name);
+ if (retval == EXT2_ET_DIR_NO_SPACE) {
+ retval = ext2fs_expand_dir(current_fs, parent_ino);
+ if (retval) {
+ com_err(__func__, retval, "while expanding directory");
+ return retval;
+ }
+ goto try_again;
+ }
+ if (retval) {
+ com_err("ext2fs_mkdir", retval, 0);
+ return retval;
+ }
}
static errcode_t copy_file(int fd, ext2_ino_t newfile, int bufsize, int make_holes)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 07/11] misc/create_inode.c: set owner/mode/time for the inode
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (5 preceding siblings ...)
2013-12-27 9:09 ` [PATCH V3 06/11] misc/create_inode.c: create directory Robert Yang
@ 2013-12-27 9:09 ` Robert Yang
2013-12-27 9:09 ` [PATCH V3 08/11] mke2fs.c: add an option: -d root-directory Robert Yang
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:09 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
Set the uid, gid, mode and time for inode.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index 15d0f17..78d868f 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -18,6 +18,40 @@
#define S_BLKSIZE 512
#endif
+/* Fill the uid, gid, mode and time for the inode */
+static void fill_inode(struct ext2_inode *inode, struct stat *st)
+{
+ if (st != NULL) {
+ inode->i_uid = st->st_uid;
+ inode->i_gid = st->st_gid;
+ inode->i_mode |= st->st_mode;
+ inode->i_atime = st->st_atime;
+ inode->i_mtime = st->st_mtime;
+ inode->i_ctime = st->st_ctime;
+ }
+}
+
+/* Set the uid, gid, mode and time for the inode */
+errcode_t set_inode_extra(ext2_ino_t cwd, ext2_ino_t ino, struct stat *st)
+{
+ errcode_t retval;
+ struct ext2_inode inode;
+
+ retval = ext2fs_read_inode(current_fs, ino, &inode);
+ if (retval) {
+ com_err(__func__, retval, "while reading inode %u", ino);
+ return retval;
+ }
+
+ fill_inode(&inode, st);
+
+ retval = ext2fs_write_inode(current_fs, ino, &inode);
+ if (retval) {
+ com_err(__func__, retval, "while writing inode %u", ino);
+ return retval;
+ }
+}
+
/* Make a special file which is block, character and fifo */
errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st)
{
@@ -435,6 +469,17 @@ errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir)
com_err(__func__, 0,
_("ignoring entry \"%s\""), name);
}
+
+ if ((retval = ext2fs_namei(current_fs, root, parent_ino, name, &ino))){
+ com_err(name, retval, 0);
+ return retval;
+ }
+
+ if ((retval = set_inode_extra(parent_ino, ino, &st))) {
+ com_err(__func__, retval,
+ _("while setting inode for \"%s\""), name);
+ return retval;
+ }
}
closedir(dh);
return retval;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 08/11] mke2fs.c: add an option: -d root-directory
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (6 preceding siblings ...)
2013-12-27 9:09 ` [PATCH V3 07/11] misc/create_inode.c: set owner/mode/time for the inode Robert Yang
@ 2013-12-27 9:09 ` Robert Yang
2013-12-27 9:09 ` [PATCH V3 09/11] misc/create_inode.c: handle hardlinks Robert Yang
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:09 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
This option is used for adding the files from a given directory (the
root-directory) to the filesystem, it is similiar to genext2fs, but
genext2fs doesn't fully support ext4.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/Makefile.in | 13 +++++++++----
misc/mke2fs.c | 32 +++++++++++++++++++++++---------
2 files changed, 32 insertions(+), 13 deletions(-)
diff --git a/misc/Makefile.in b/misc/Makefile.in
index 553c361..15860dd 100644
--- a/misc/Makefile.in
+++ b/misc/Makefile.in
@@ -42,7 +42,7 @@ LPROGS= @E2INITRD_PROG@
TUNE2FS_OBJS= tune2fs.o util.o
MKLPF_OBJS= mklost+found.o
-MKE2FS_OBJS= mke2fs.o util.o profile.o prof_err.o default_profile.o
+MKE2FS_OBJS= mke2fs.o util.o profile.o prof_err.o default_profile.o create_inode.o
CHATTR_OBJS= chattr.o
LSATTR_OBJS= lsattr.o
UUIDGEN_OBJS= uuidgen.o
@@ -60,7 +60,8 @@ E2FREEFRAG_OBJS= e2freefrag.o
PROFILED_TUNE2FS_OBJS= profiled/tune2fs.o profiled/util.o
PROFILED_MKLPF_OBJS= profiled/mklost+found.o
PROFILED_MKE2FS_OBJS= profiled/mke2fs.o profiled/util.o profiled/profile.o \
- profiled/prof_err.o profiled/default_profile.o
+ profiled/prof_err.o profiled/default_profile.o \
+ profiled/create_inode.o
PROFILED_CHATTR_OBJS= profiled/chattr.o
PROFILED_LSATTR_OBJS= profiled/lsattr.o
PROFILED_UUIDGEN_OBJS= profiled/uuidgen.o
@@ -82,7 +83,7 @@ SRCS= $(srcdir)/tune2fs.c $(srcdir)/mklost+found.c $(srcdir)/mke2fs.c \
$(srcdir)/uuidgen.c $(srcdir)/blkid.c $(srcdir)/logsave.c \
$(srcdir)/filefrag.c $(srcdir)/base_device.c \
$(srcdir)/ismounted.c $(srcdir)/../e2fsck/profile.c \
- $(srcdir)/e2undo.c $(srcdir)/e2freefrag.c
+ $(srcdir)/e2undo.c $(srcdir)/e2freefrag.c $(srcdir)/create_inode.c
LIBS= $(LIBEXT2FS) $(LIBCOM_ERR)
DEPLIBS= $(LIBEXT2FS) $(DEPLIBCOM_ERR)
@@ -630,7 +631,7 @@ mke2fs.o: $(srcdir)/mke2fs.c $(top_builddir)/lib/config.h \
$(top_srcdir)/lib/ext2fs/ext2_ext_attr.h $(top_srcdir)/lib/ext2fs/bitops.h \
$(top_srcdir)/lib/e2p/e2p.h $(top_srcdir)/lib/ext2fs/ext2fs.h \
$(srcdir)/util.h profile.h prof_err.h $(top_srcdir)/version.h \
- $(srcdir)/nls-enable.h $(top_srcdir)/lib/quota/mkquota.h \
+ $(srcdir)/nls-enable.h $(top_srcdir)/lib/quota/mkquota.h $(srcdir)/create_inode.h\
$(top_srcdir)/lib/quota/quotaio.h $(top_srcdir)/lib/quota/dqblk_v2.h \
$(top_srcdir)/lib/quota/quotaio_tree.h $(top_srcdir)/lib/../e2fsck/dict.h
chattr.o: $(srcdir)/chattr.c $(top_builddir)/lib/config.h \
@@ -710,3 +711,7 @@ e2freefrag.o: $(srcdir)/e2freefrag.c $(top_builddir)/lib/config.h \
$(top_srcdir)/lib/ext2fs/ext2_io.h $(top_builddir)/lib/ext2fs/ext2_err.h \
$(top_srcdir)/lib/ext2fs/ext2_ext_attr.h $(top_srcdir)/lib/ext2fs/bitops.h \
$(srcdir)/e2freefrag.h
+create_inode.o: $(srcdir)/create_inode.h $(srcdir)/create_inode.c \
+ $(top_builddir)/lib/config.h $(top_srcdir)/lib/ext2fs/ext2fs.h \
+ $(top_srcdir)/lib/et/com_err.h $(top_srcdir)/lib/e2p/e2p.h \
+ $(srcdir)/nls-enable.h
diff --git a/misc/mke2fs.c b/misc/mke2fs.c
index 64d5a46..5a908d1 100644
--- a/misc/mke2fs.c
+++ b/misc/mke2fs.c
@@ -22,7 +22,6 @@
#include <stdio.h>
#include <string.h>
#include <strings.h>
-#include <fcntl.h>
#include <ctype.h>
#include <time.h>
#ifdef __linux__
@@ -44,24 +43,19 @@ extern int optind;
#include <errno.h>
#endif
#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
#include <libgen.h>
#include <limits.h>
#include <blkid/blkid.h>
#include "ext2fs/ext2_fs.h"
#include "ext2fs/ext2fsP.h"
-#include "et/com_err.h"
#include "uuid/uuid.h"
-#include "e2p/e2p.h"
-#include "ext2fs/ext2fs.h"
#include "util.h"
#include "profile.h"
#include "prof_err.h"
#include "../version.h"
-#include "nls-enable.h"
#include "quota/mkquota.h"
+#include "create_inode.h"
#define STRIDE_LENGTH 8
@@ -105,6 +99,7 @@ static char *mount_dir;
char *journal_device;
static int sync_kludge; /* Set using the MKE2FS_SYNC env. option */
static char **fs_types;
+const char *root_dir; /* Copy files from the specified directory */
static profile_t profile;
@@ -116,7 +111,8 @@ static void usage(void)
fprintf(stderr, _("Usage: %s [-c|-l filename] [-b block-size] "
"[-C cluster-size]\n\t[-i bytes-per-inode] [-I inode-size] "
"[-J journal-options]\n"
- "\t[-G flex-group-size] [-N number-of-inodes]\n"
+ "\t[-G flex-group-size] [-N number-of-inodes] "
+ "[-d root-directory]\n"
"\t[-m reserved-blocks-percentage] [-o creator-os]\n"
"\t[-g blocks-per-group] [-L volume-label] "
"[-M last-mounted-directory]\n\t[-O feature[,...]] "
@@ -1434,7 +1430,7 @@ profile_error:
}
while ((c = getopt (argc, argv,
- "b:cg:i:jl:m:no:qr:s:t:vC:DE:FG:I:J:KL:M:N:O:R:ST:U:V")) != EOF) {
+ "b:cg:i:jl:m:no:qr:s:t:d:vC:DE:FG:I:J:KL:M:N:O:R:ST:U:V")) != EOF) {
switch (c) {
case 'b':
blocksize = parse_num_blocks2(optarg, -1);
@@ -1622,6 +1618,9 @@ profile_error:
case 'U':
fs_uuid = optarg;
break;
+ case 'd':
+ root_dir = optarg;
+ break;
case 'v':
verbose = 1;
break;
@@ -2829,6 +2828,21 @@ no_journal:
EXT4_FEATURE_RO_COMPAT_QUOTA))
create_quota_inodes(fs);
+ /* Copy files from the specified directory */
+ if (root_dir) {
+ if (!quiet)
+ printf("%s", _("Copying files into the device: "));
+
+ current_fs = fs;
+ root = EXT2_ROOT_INO;
+ retval = populate_fs(root, root_dir);
+ if (retval)
+ fprintf(stderr, "%s",
+ _("\nError while populating %s"), root_dir);
+ else if (!quiet)
+ printf("%s", _("done\n"));
+ }
+
if (!quiet)
printf("%s", _("Writing superblocks and "
"filesystem accounting information: "));
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 09/11] misc/create_inode.c: handle hardlinks
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (7 preceding siblings ...)
2013-12-27 9:09 ` [PATCH V3 08/11] mke2fs.c: add an option: -d root-directory Robert Yang
@ 2013-12-27 9:09 ` Robert Yang
2013-12-27 9:09 ` [PATCH V3 10/11] debugfs: use the functions in misc/create_inode.c Robert Yang
2013-12-27 9:09 ` [PATCH V3 11/11] mke2fs.8.in: update the manual for the -d option Robert Yang
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:09 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
Create the inode and save the native inode number when we meet the hard
link (st_nlink > 1) at the first time, use ext2fs_link() to link the
name to the target inode number when we meet the same native inode
number again.
This algorithm is referred this from the genext2fs.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/create_inode.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++
misc/create_inode.h | 18 +++++++++++
misc/mke2fs.c | 12 +++++++
3 files changed, 118 insertions(+)
diff --git a/misc/create_inode.c b/misc/create_inode.c
index 78d868f..d6e77a8 100644
--- a/misc/create_inode.c
+++ b/misc/create_inode.c
@@ -18,6 +18,44 @@
#define S_BLKSIZE 512
#endif
+/* For saving the hard links */
+int hdlink_cnt = HDLINK_CNT;
+
+/* Link an inode number to a directory */
+static errcode_t add_link(ext2_ino_t parent_ino, ext2_ino_t ino, const char *name)
+{
+ struct ext2_inode inode;
+ errcode_t retval;
+
+ retval = ext2fs_read_inode(current_fs, ino, &inode);
+ if (retval) {
+ com_err(__func__, retval, "while reading inode %u", ino);
+ return retval;
+ }
+
+ retval = ext2fs_link(current_fs, parent_ino, name, ino, inode.i_flags);
+ if (retval == EXT2_ET_DIR_NO_SPACE) {
+ retval = ext2fs_expand_dir(current_fs, parent_ino);
+ if (retval) {
+ com_err(__func__, retval, "while expanding directory");
+ return retval;
+ }
+ retval = ext2fs_link(current_fs, parent_ino, name, ino, inode.i_flags);
+ }
+ if (retval) {
+ com_err(__func__, retval, "while linking %s", name);
+ return retval;
+ }
+
+ inode.i_links_count++;
+
+ retval = ext2fs_write_inode(current_fs, ino, &inode);
+ if (retval)
+ com_err(__func__, retval, "while writing inode %u", ino);
+
+ return retval;
+}
+
/* Fill the uid, gid, mode and time for the inode */
static void fill_inode(struct ext2_inode *inode, struct stat *st)
{
@@ -278,6 +316,17 @@ fail:
return retval;
}
+int is_hardlink(ext2_ino_t ino)
+{
+ int i;
+
+ for(i = 0; i < hdlinks.count; i++) {
+ if(hdlinks.hdl[i].src_ino == ino)
+ return i;
+ }
+ return -1;
+}
+
/* Copy the native file to the fs */
errcode_t do_write_internal(ext2_ino_t cwd, const char *src, const char *dest)
{
@@ -388,9 +437,11 @@ errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir)
struct dirent *dent;
struct stat st;
char ln_target[PATH_MAX];
+ unsigned int save_inode;
ext2_ino_t ino;
errcode_t retval;
int read_cnt;
+ int hdlink;
root = EXT2_ROOT_INO;
@@ -412,6 +463,22 @@ errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir)
lstat(dent->d_name, &st);
name = dent->d_name;
+ /* Check for hardlinks */
+ save_inode = 0;
+ if (!S_ISDIR(st.st_mode) && !S_ISLNK(st.st_mode) && st.st_nlink > 1) {
+ hdlink = is_hardlink(st.st_ino);
+ if (hdlink >= 0) {
+ retval = add_link(parent_ino,
+ hdlinks.hdl[hdlink].dst_ino, name);
+ if (retval) {
+ com_err(__func__, retval, "while linking %s", name);
+ return retval;
+ }
+ continue;
+ } else
+ save_inode = 1;
+ }
+
switch(st.st_mode & S_IFMT) {
case S_IFCHR:
case S_IFBLK:
@@ -480,6 +547,27 @@ errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir)
_("while setting inode for \"%s\""), name);
return retval;
}
+
+ /* Save the hardlink ino */
+ if (save_inode) {
+ /*
+ * Check whether need more memory, and we don't need
+ * free() since the lifespan will be over after the fs
+ * populated.
+ */
+ if (hdlinks.count == hdlink_cnt) {
+ if ((hdlinks.hdl = realloc (hdlinks.hdl,
+ (hdlink_cnt + HDLINK_CNT) *
+ sizeof (struct hdlink_s))) == NULL) {
+ com_err(name, errno, "Not enough memory");
+ return errno;
+ }
+ hdlink_cnt += HDLINK_CNT;
+ }
+ hdlinks.hdl[hdlinks.count].src_ino = st.st_ino;
+ hdlinks.hdl[hdlinks.count].dst_ino = ino;
+ hdlinks.count++;
+ }
}
closedir(dh);
return retval;
diff --git a/misc/create_inode.h b/misc/create_inode.h
index 9fc97fa..2b6d429 100644
--- a/misc/create_inode.h
+++ b/misc/create_inode.h
@@ -6,9 +6,27 @@
#include "ext2fs/ext2fs.h"
#include "nls-enable.h"
+struct hdlink_s
+{
+ ext2_ino_t src_ino;
+ ext2_ino_t dst_ino;
+};
+
+struct hdlinks_s
+{
+ int count;
+ struct hdlink_s *hdl;
+};
+
+struct hdlinks_s hdlinks;
+
ext2_filsys current_fs;
ext2_ino_t root;
+/* For saving the hard links */
+#define HDLINK_CNT 4
+extern int hdlink_cnt;
+
/* For populating the filesystem */
extern errcode_t populate_fs(ext2_ino_t parent_ino, const char *source_dir);
extern errcode_t do_mknod_internal(ext2_ino_t cwd, const char *name, struct stat *st);
diff --git a/misc/mke2fs.c b/misc/mke2fs.c
index 5a908d1..3229d39 100644
--- a/misc/mke2fs.c
+++ b/misc/mke2fs.c
@@ -2833,6 +2833,18 @@ no_journal:
if (!quiet)
printf("%s", _("Copying files into the device: "));
+ /*
+ * Allocate memory for the hardlinks, we don't need free()
+ * since the lifespan will be over after the fs populated.
+ */
+ if ((hdlinks.hdl = (struct hdlink_s *)
+ malloc(hdlink_cnt * sizeof(struct hdlink_s))) == NULL) {
+ fprintf(stderr, "%s", _("\nNot enough memory\n"));
+ retval = ext2fs_close(fs);
+ return retval;
+ }
+
+ hdlinks.count = 0;
current_fs = fs;
root = EXT2_ROOT_INO;
retval = populate_fs(root, root_dir);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 10/11] debugfs: use the functions in misc/create_inode.c
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (8 preceding siblings ...)
2013-12-27 9:09 ` [PATCH V3 09/11] misc/create_inode.c: handle hardlinks Robert Yang
@ 2013-12-27 9:09 ` Robert Yang
2013-12-27 9:09 ` [PATCH V3 11/11] mke2fs.8.in: update the manual for the -d option Robert Yang
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:09 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
* Use the functions in misc/create_inode.c, and remove the duplicated
code.
* The CREATE_INODE_DEPS in the debugfs/Makefile.in is used for recording
create_inode.o's depends which is from misc/Makefile.in, we have to
recompile create_inode.o because we need it to print more messages when
it is used by debugfs, just like we recompile e2freefrag.o, but it seems
that the e2freefrag.o's depends in debugfs/Makefile.in is incorrect, it
would not rebuild when its depends (e.g.: lib/config.h) is changed,
which would cause unexpected errors. Make duplicated code in
debugfs/Makefile.in and misc/Makefile.in is not a good idea, maybe we'd
better define CREATE_INODE_DEPS in the top Makefile, I'd like to send
another patch and fix the e2freefrag if you are fine with it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
debugfs/Makefile.in | 17 ++-
debugfs/debugfs.c | 305 +++------------------------------------------------
debugfs/debugfs.h | 1 +
3 files changed, 31 insertions(+), 292 deletions(-)
diff --git a/debugfs/Makefile.in b/debugfs/Makefile.in
index bf037e0..f51b78e 100644
--- a/debugfs/Makefile.in
+++ b/debugfs/Makefile.in
@@ -18,7 +18,7 @@ MK_CMDS= _SS_DIR_OVERRIDE=../lib/ss ../lib/ss/mk_cmds
DEBUG_OBJS= debug_cmds.o debugfs.o util.o ncheck.o icheck.o ls.o \
lsdel.o dump.o set_fields.o logdump.o htree.o unused.o e2freefrag.o \
- filefrag.o extent_cmds.o extent_inode.o zap.o
+ filefrag.o extent_cmds.o extent_inode.o zap.o create_inode.o
RO_DEBUG_OBJS= ro_debug_cmds.o ro_debugfs.o util.o ncheck.o icheck.o ls.o \
lsdel.o logdump.o htree.o e2freefrag.o filefrag.o extent_cmds.o \
@@ -28,7 +28,13 @@ SRCS= debug_cmds.c $(srcdir)/debugfs.c $(srcdir)/util.c $(srcdir)/ls.c \
$(srcdir)/ncheck.c $(srcdir)/icheck.c $(srcdir)/lsdel.c \
$(srcdir)/dump.c $(srcdir)/set_fields.c ${srcdir}/logdump.c \
$(srcdir)/htree.c $(srcdir)/unused.c ${srcdir}/../misc/e2freefrag.c \
- $(srcdir)/filefrag.c $(srcdir)/extent_inode.c $(srcdir)/zap.c
+ $(srcdir)/filefrag.c $(srcdir)/extent_inode.c $(srcdir)/zap.c \
+ $(srcdir)/../misc/create_inode.c
+
+CREATE_INODE_DEPS= $(srcdir)/../misc/create_inode.h \
+ $(srcdir)/../misc/create_inode.c $(top_builddir)/lib/config.h \
+ $(srcdir)/../lib/ext2fs/ext2fs.h $(srcdir)/../lib/et/com_err.h \
+ $(srcdir)/../lib/e2p/e2p.h $(srcdir)/../misc/nls-enable.h
LIBS= $(LIBEXT2FS) $(LIBE2P) $(LIBSS) $(LIBCOM_ERR) $(LIBBLKID) \
$(LIBUUID)
@@ -81,6 +87,11 @@ e2freefrag.o: $(srcdir)/../misc/e2freefrag.c
$(E) " CC $@"
$(Q) $(CC) -c $(ALL_CFLAGS) -I$(srcdir) $< -DDEBUGFS -o $@
+create_inode.o: $(CREATE_INODE_DEPS)
+ $(E) " CC $@"
+ $(Q) $(CC) -c $(ALL_CFLAGS) -I$(srcdir) \
+ $(srcdir)/../misc/create_inode.c -DDEBUGFS -o $@
+
debugfs.8: $(DEP_SUBSTITUTE) $(srcdir)/debugfs.8.in
$(E) " SUBST $@"
$(Q) $(SUBSTITUTE_UPTIME) $(srcdir)/debugfs.8.in debugfs.8
@@ -142,7 +153,7 @@ debugfs.o: $(srcdir)/debugfs.c $(top_srcdir)/lib/et/com_err.h \
$(top_srcdir)/lib/ext2fs/ext2_ext_attr.h $(top_srcdir)/lib/ext2fs/bitops.h \
$(top_srcdir)/lib/e2p/e2p.h $(top_srcdir)/version.h $(srcdir)/jfs_user.h \
$(top_srcdir)/lib/ext2fs/kernel-jbd.h $(top_srcdir)/lib/ext2fs/jfs_compat.h \
- $(top_srcdir)/lib/ext2fs/kernel-list.h
+ $(top_srcdir)/lib/ext2fs/kernel-list.h $(top_srcdir)/misc/util.h
util.o: $(srcdir)/util.c $(srcdir)/debugfs.h \
$(top_srcdir)/lib/ext2fs/ext2_fs.h $(top_builddir)/lib/ext2fs/ext2_types.h \
$(top_srcdir)/lib/ext2fs/ext2fs.h $(top_srcdir)/lib/ext2fs/ext3_extents.h \
diff --git a/debugfs/debugfs.c b/debugfs/debugfs.c
index 179dd9a..1ddbede 100644
--- a/debugfs/debugfs.c
+++ b/debugfs/debugfs.c
@@ -25,8 +25,6 @@ extern char *optarg;
#include <errno.h>
#endif
#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
#include "debugfs.h"
#include "uuid/uuid.h"
@@ -41,22 +39,11 @@ extern char *optarg;
#define BUFSIZ 8192
#endif
-/* 64KiB is the minimium blksize to best minimize system call overhead. */
-#ifndef IO_BUFSIZE
-#define IO_BUFSIZE 64*1024
-#endif
-
-/* Block size for `st_blocks' */
-#ifndef S_BLKSIZE
-#define S_BLKSIZE 512
-#endif
-
ss_request_table *extra_cmds;
const char *debug_prog_name;
int sci_idx;
-ext2_filsys current_fs = NULL;
-ext2_ino_t root, cwd;
+ext2_ino_t cwd;
static void open_filesystem(char *device, int open_flags, blk64_t superblock,
blk64_t blocksize, int catastrophic,
@@ -1588,189 +1575,24 @@ void do_find_free_inode(int argc, char *argv[])
}
#ifndef READ_ONLY
-static errcode_t copy_file(int fd, ext2_ino_t newfile, int bufsize, int make_holes)
-{
- ext2_file_t e2_file;
- errcode_t retval;
- int got;
- unsigned int written;
- char *buf;
- char *ptr;
- char *zero_buf;
- int cmp;
-
- retval = ext2fs_file_open(current_fs, newfile,
- EXT2_FILE_WRITE, &e2_file);
- if (retval)
- return retval;
-
- retval = ext2fs_get_mem(bufsize, &buf);
- if (retval) {
- com_err("copy_file", retval, "can't allocate buffer\n");
- return retval;
- }
-
- /* This is used for checking whether the whole block is zero */
- retval = ext2fs_get_memzero(bufsize, &zero_buf);
- if (retval) {
- com_err("copy_file", retval, "can't allocate buffer\n");
- ext2fs_free_mem(&buf);
- return retval;
- }
-
- while (1) {
- got = read(fd, buf, bufsize);
- if (got == 0)
- break;
- if (got < 0) {
- retval = errno;
- goto fail;
- }
- ptr = buf;
-
- /* Sparse copy */
- if (make_holes) {
- /* Check whether all is zero */
- cmp = memcmp(ptr, zero_buf, got);
- if (cmp == 0) {
- /* The whole block is zero, make a hole */
- retval = ext2fs_file_lseek(e2_file, got, EXT2_SEEK_CUR, NULL);
- if (retval)
- goto fail;
- got = 0;
- }
- }
-
- /* Normal copy */
- while (got > 0) {
- retval = ext2fs_file_write(e2_file, ptr,
- got, &written);
- if (retval)
- goto fail;
-
- got -= written;
- ptr += written;
- }
- }
- ext2fs_free_mem(&buf);
- ext2fs_free_mem(&zero_buf);
- retval = ext2fs_file_close(e2_file);
- return retval;
-
-fail:
- ext2fs_free_mem(&buf);
- ext2fs_free_mem(&zero_buf);
- (void) ext2fs_file_close(e2_file);
- return retval;
-}
-
-
void do_write(int argc, char *argv[])
{
- int fd;
- struct stat statbuf;
- ext2_ino_t newfile;
errcode_t retval;
- struct ext2_inode inode;
- int bufsize = IO_BUFSIZE;
- int make_holes = 0;
if (common_args_process(argc, argv, 3, 3, "write",
"<native file> <new file>", CHECK_FS_RW))
return;
- fd = open(argv[1], O_RDONLY);
- if (fd < 0) {
- com_err(argv[1], errno, 0);
- return;
- }
- if (fstat(fd, &statbuf) < 0) {
- com_err(argv[1], errno, 0);
- close(fd);
- return;
- }
-
- retval = ext2fs_namei(current_fs, root, cwd, argv[2], &newfile);
- if (retval == 0) {
- com_err(argv[0], 0, "The file '%s' already exists\n", argv[2]);
- close(fd);
- return;
- }
-
- retval = ext2fs_new_inode(current_fs, cwd, 010755, 0, &newfile);
- if (retval) {
+ if ((retval = do_write_internal(cwd, argv[1], argv[2])))
com_err(argv[0], retval, 0);
- close(fd);
- return;
- }
- printf("Allocated inode: %u\n", newfile);
- retval = ext2fs_link(current_fs, cwd, argv[2], newfile,
- EXT2_FT_REG_FILE);
- if (retval == EXT2_ET_DIR_NO_SPACE) {
- retval = ext2fs_expand_dir(current_fs, cwd);
- if (retval) {
- com_err(argv[0], retval, "while expanding directory");
- close(fd);
- return;
- }
- retval = ext2fs_link(current_fs, cwd, argv[2], newfile,
- EXT2_FT_REG_FILE);
- }
- if (retval) {
- com_err(argv[2], retval, 0);
- close(fd);
- return;
- }
- if (ext2fs_test_inode_bitmap2(current_fs->inode_map,newfile))
- com_err(argv[0], 0, "Warning: inode already set");
- ext2fs_inode_alloc_stats2(current_fs, newfile, +1, 0);
- memset(&inode, 0, sizeof(inode));
- inode.i_mode = (statbuf.st_mode & ~LINUX_S_IFMT) | LINUX_S_IFREG;
- inode.i_atime = inode.i_ctime = inode.i_mtime =
- current_fs->now ? current_fs->now : time(0);
- inode.i_links_count = 1;
- inode.i_size = statbuf.st_size;
- if (current_fs->super->s_feature_incompat &
- EXT3_FEATURE_INCOMPAT_EXTENTS) {
- int i;
- struct ext3_extent_header *eh;
-
- eh = (struct ext3_extent_header *) &inode.i_block[0];
- eh->eh_depth = 0;
- eh->eh_entries = 0;
- eh->eh_magic = ext2fs_cpu_to_le16(EXT3_EXT_MAGIC);
- i = (sizeof(inode.i_block) - sizeof(*eh)) /
- sizeof(struct ext3_extent);
- eh->eh_max = ext2fs_cpu_to_le16(i);
- inode.i_flags |= EXT4_EXTENTS_FL;
- }
- if (debugfs_write_new_inode(newfile, &inode, argv[0])) {
- close(fd);
- return;
- }
- if (LINUX_S_ISREG(inode.i_mode)) {
- if (statbuf.st_blocks < statbuf.st_size / S_BLKSIZE) {
- make_holes = 1;
- /*
- * Use I/O blocksize as buffer size when
- * copying sparse files.
- */
- bufsize = statbuf.st_blksize;
- }
- retval = copy_file(fd, newfile, bufsize, make_holes);
- if (retval)
- com_err("copy_file", retval, 0);
- }
- close(fd);
}
void do_mknod(int argc, char *argv[])
{
unsigned long mode, major, minor;
- ext2_ino_t newfile;
errcode_t retval;
- struct ext2_inode inode;
int filetype, nr;
+ struct stat st;
if (check_fs_open(argv[0]))
return;
@@ -1779,115 +1601,50 @@ void do_mknod(int argc, char *argv[])
com_err(argv[0], 0, "Usage: mknod <name> [p| [c|b] <major> <minor>]");
return;
}
+
mode = minor = major = 0;
switch (argv[2][0]) {
case 'p':
- mode = LINUX_S_IFIFO;
- filetype = EXT2_FT_FIFO;
+ st.st_mode = S_IFIFO;
nr = 3;
break;
case 'c':
- mode = LINUX_S_IFCHR;
- filetype = EXT2_FT_CHRDEV;
+ st.st_mode = S_IFCHR;
nr = 5;
break;
case 'b':
- mode = LINUX_S_IFBLK;
- filetype = EXT2_FT_BLKDEV;
+ st.st_mode = S_IFBLK;
nr = 5;
break;
default:
- filetype = 0;
nr = 0;
}
+
if (nr == 5) {
major = strtoul(argv[3], argv+3, 0);
minor = strtoul(argv[4], argv+4, 0);
if (major > 65535 || minor > 65535 || argv[3][0] || argv[4][0])
nr = 0;
}
+
if (argc != nr)
goto usage;
- if (check_fs_read_write(argv[0]))
- return;
- retval = ext2fs_new_inode(current_fs, cwd, 010755, 0, &newfile);
- if (retval) {
+
+ st.st_rdev = makedev(major, minor);
+ if ((retval = do_mknod_internal(cwd, argv[1], &st)))
com_err(argv[0], retval, 0);
- return;
- }
- printf("Allocated inode: %u\n", newfile);
- retval = ext2fs_link(current_fs, cwd, argv[1], newfile, filetype);
- if (retval == EXT2_ET_DIR_NO_SPACE) {
- retval = ext2fs_expand_dir(current_fs, cwd);
- if (retval) {
- com_err(argv[0], retval, "while expanding directory");
- return;
- }
- retval = ext2fs_link(current_fs, cwd, argv[1], newfile,
- filetype);
- }
- if (retval) {
- com_err(argv[1], retval, 0);
- return;
- }
- if (ext2fs_test_inode_bitmap2(current_fs->inode_map,newfile))
- com_err(argv[0], 0, "Warning: inode already set");
- ext2fs_inode_alloc_stats2(current_fs, newfile, +1, 0);
- memset(&inode, 0, sizeof(inode));
- inode.i_mode = mode;
- inode.i_atime = inode.i_ctime = inode.i_mtime =
- current_fs->now ? current_fs->now : time(0);
- if ((major < 256) && (minor < 256)) {
- inode.i_block[0] = major*256+minor;
- inode.i_block[1] = 0;
- } else {
- inode.i_block[0] = 0;
- inode.i_block[1] = (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
- }
- inode.i_links_count = 1;
- if (debugfs_write_new_inode(newfile, &inode, argv[0]))
- return;
}
void do_mkdir(int argc, char *argv[])
{
- char *cp;
- ext2_ino_t parent;
- char *name;
errcode_t retval;
if (common_args_process(argc, argv, 2, 2, "mkdir",
"<filename>", CHECK_FS_RW))
return;
- cp = strrchr(argv[1], '/');
- if (cp) {
- *cp = 0;
- parent = string_to_inode(argv[1]);
- if (!parent) {
- com_err(argv[1], ENOENT, 0);
- return;
- }
- name = cp+1;
- } else {
- parent = cwd;
- name = argv[1];
- }
-
-try_again:
- retval = ext2fs_mkdir(current_fs, parent, 0, name);
- if (retval == EXT2_ET_DIR_NO_SPACE) {
- retval = ext2fs_expand_dir(current_fs, parent);
- if (retval) {
- com_err(argv[0], retval, "while expanding directory");
- return;
- }
- goto try_again;
- }
- if (retval) {
- com_err("ext2fs_mkdir", retval, 0);
- return;
- }
+ if ((retval = do_mkdir_internal(cwd, argv[1], NULL)))
+ com_err(argv[0], retval, 0);
}
@@ -2282,44 +2039,14 @@ void do_punch(int argc, char *argv[])
void do_symlink(int argc, char *argv[])
{
- char *cp;
- ext2_ino_t parent;
- char *name, *target;
errcode_t retval;
if (common_args_process(argc, argv, 3, 3, "symlink",
"<filename> <target>", CHECK_FS_RW))
return;
- cp = strrchr(argv[1], '/');
- if (cp) {
- *cp = 0;
- parent = string_to_inode(argv[1]);
- if (!parent) {
- com_err(argv[1], ENOENT, 0);
- return;
- }
- name = cp+1;
- } else {
- parent = cwd;
- name = argv[1];
- }
- target = argv[2];
-
-try_again:
- retval = ext2fs_symlink(current_fs, parent, 0, name, target);
- if (retval == EXT2_ET_DIR_NO_SPACE) {
- retval = ext2fs_expand_dir(current_fs, parent);
- if (retval) {
- com_err(argv[0], retval, "while expanding directory");
- return;
- }
- goto try_again;
- }
- if (retval) {
- com_err("ext2fs_symlink", retval, 0);
- return;
- }
+ if ((retval = do_symlink_internal(cwd, argv[1], argv[2])))
+ com_err(argv[0], retval, 0);
}
diff --git a/debugfs/debugfs.h b/debugfs/debugfs.h
index 6b4f6ef..2d464c1 100644
--- a/debugfs/debugfs.h
+++ b/debugfs/debugfs.h
@@ -5,6 +5,7 @@
#include "ss/ss.h"
#include "ext2fs/ext2_fs.h"
#include "ext2fs/ext2fs.h"
+#include "../misc/create_inode.h"
#ifdef __STDC__
#define NOARGS void
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH V3 11/11] mke2fs.8.in: update the manual for the -d option
2013-12-27 9:08 [PATCH V3 00/11] e2fsprogs/mke2fs: add an option: -d root-directory Robert Yang
` (9 preceding siblings ...)
2013-12-27 9:09 ` [PATCH V3 10/11] debugfs: use the functions in misc/create_inode.c Robert Yang
@ 2013-12-27 9:09 ` Robert Yang
10 siblings, 0 replies; 12+ messages in thread
From: Robert Yang @ 2013-12-27 9:09 UTC (permalink / raw)
To: tytso, dvhart; +Cc: linux-ext4
Update the manual for the -d option
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
---
misc/mke2fs.8.in | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/misc/mke2fs.8.in b/misc/mke2fs.8.in
index c178628..e7f2d9d 100644
--- a/misc/mke2fs.8.in
+++ b/misc/mke2fs.8.in
@@ -52,6 +52,10 @@ mke2fs \- create an ext2/ext3/ext4 filesystem
.I number-of-inodes
]
[
+.B \-d
+.I root-directory
+]
+[
.B \-n
]
[
@@ -490,6 +494,9 @@ the
ratio). This allows the user to specify the number
of desired inodes directly.
.TP
+.BI \-d " root-directory"
+Add the files from the root-directory to the filesystem.
+.TP
.BI \-o " creator-os"
Overrides the default value of the "creator operating system" field of the
filesystem. The creator field is set by default to the name of the OS the
--
1.7.10.4
^ permalink raw reply related [flat|nested] 12+ messages in thread