From: Jan Kara <jack@suse.cz>
To: Ted Tso <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org, Sage Weil <sage@inktank.com>,
Jan Kara <jack@suse.cz>
Subject: [PATCH] ext4: Fix jbd2 warning under heavy xattr load
Date: Mon, 7 Apr 2014 11:38:39 +0200 [thread overview]
Message-ID: <1396863519-16895-1-git-send-email-jack@suse.cz> (raw)
When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:
WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()
CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
[<ffffffff816311b0>] dump_stack+0x19/0x1b
[<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
[<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
[<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
[<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
[<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
[<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
[<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
[<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
[<ffffffff811935ce>] generic_setxattr+0x6e/0x90
[<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
[<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
[<ffffffff8119421e>] setxattr+0x13e/0x1e0
[<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
[<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
[<ffffffff8118c65c>] ? fget_light+0x3c/0x130
[<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
[<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
[<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
[<ffffffff816407c2>] system_call_fastpath+0x16/0x1b
The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:
CPU1 CPU2
ext4_xattr_release_block() ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
unlock_buffer(bh);
lock_buffer(bh);
/* True */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
get_bh(bh);
ext4_free_blocks()
...
jbd2_journal_forget()
jbd2_journal_unfile_buffer()
-> JH is gone
error = ext4_handle_dirty_xattr_block(handle, inode, bh);
-> triggers the warning
We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/ext4/xattr.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index e175e94116ac..55e611c1513c 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -517,8 +517,8 @@ static void ext4_xattr_update_super_block(handle_t *handle,
}
/*
- * Release the xattr block BH: If the reference count is > 1, decrement
- * it; otherwise free the block.
+ * Release the xattr block BH: If the reference count is > 1, decrement it;
+ * otherwise free the block.
*/
static void
ext4_xattr_release_block(handle_t *handle, struct inode *inode,
@@ -538,16 +538,31 @@ ext4_xattr_release_block(handle_t *handle, struct inode *inode,
if (ce)
mb_cache_entry_free(ce);
get_bh(bh);
+ unlock_buffer(bh);
ext4_free_blocks(handle, inode, bh, 0, 1,
EXT4_FREE_BLOCKS_METADATA |
EXT4_FREE_BLOCKS_FORGET);
- unlock_buffer(bh);
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
if (ce)
mb_cache_entry_release(ce);
+ /*
+ * Beware of this ugliness: Releasing of xattr block references
+ * from different inodes can race and so we have to protect
+ * from a race where someone else frees the block (and releases
+ * its journal_head) before we are done dirtying the buffer. In
+ * nojournal mode this race is harmless and we actually cannot
+ * call ext4_handle_dirty_xattr_block() with locked buffer as
+ * that function can call sync_dirty_buffer() so for that case
+ * we handle the dirtying after unlocking the buffer.
+ */
+ if (ext4_handle_valid(handle))
+ error = ext4_handle_dirty_xattr_block(handle, inode,
+ bh);
unlock_buffer(bh);
- error = ext4_handle_dirty_xattr_block(handle, inode, bh);
+ if (!ext4_handle_valid(handle))
+ error = ext4_handle_dirty_xattr_block(handle, inode,
+ bh);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
--
1.8.1.4
next reply other threads:[~2014-04-07 9:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-07 9:38 Jan Kara [this message]
2014-04-07 14:55 ` [PATCH] ext4: Fix jbd2 warning under heavy xattr load Theodore Ts'o
-- strict thread matches above, loose matches on Subject: below --
2014-10-10 14:23 [PATCH 0/2 v2] Fix data corruption when blocksize < pagesize for mmapped data Jan Kara
2014-10-10 14:23 ` [PATCH] ext4: Fix jbd2 warning under heavy xattr load Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396863519-16895-1-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=sage@inktank.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).