From: Jan Kara <jack@suse.cz>
To: linux-fsdevel@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>, linux-ext4@vger.kernel.org
Subject: [PATCH 1/5] ext3: Don't use MAXQUOTAS value
Date: Wed, 10 Sep 2014 21:22:48 +0200 [thread overview]
Message-ID: <1410376972-18417-2-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1410376972-18417-1-git-send-email-jack@suse.cz>
MAXQUOTAS value defines maximum number of quota types VFS supports. This
isn't necessarily the number of types ext3 supports and with addition of
project quotas these two numbers stop matching. So make ext3 use its
private definition.
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/ext3/ext3.h | 12 +++++++-----
fs/ext3/super.c | 14 +++++++-------
2 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/fs/ext3/ext3.h b/fs/ext3/ext3.h
index e85ff15a060e..fc3cdcf24aed 100644
--- a/fs/ext3/ext3.h
+++ b/fs/ext3/ext3.h
@@ -237,6 +237,8 @@ struct ext3_new_group_data {
#define EXT3_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION
#define EXT3_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION
+/* Number of supported quota types */
+#define EXT3_MAXQUOTAS 2
/*
* Mount options
@@ -248,7 +250,7 @@ struct ext3_mount_options {
unsigned long s_commit_interval;
#ifdef CONFIG_QUOTA
int s_jquota_fmt;
- char *s_qf_names[MAXQUOTAS];
+ char *s_qf_names[EXT3_MAXQUOTAS];
#endif
};
@@ -669,7 +671,7 @@ struct ext3_sb_info {
unsigned long s_commit_interval;
struct block_device *journal_bdev;
#ifdef CONFIG_QUOTA
- char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
+ char *s_qf_names[EXT3_MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
#endif
};
@@ -1183,9 +1185,9 @@ extern const struct inode_operations ext3_fast_symlink_inode_operations;
#define EXT3_QUOTA_INIT_BLOCKS(sb) 0
#define EXT3_QUOTA_DEL_BLOCKS(sb) 0
#endif
-#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb))
-#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb))
-#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb))
+#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb))
+#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (EXT3_MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb))
+#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (EXT3_MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb))
int
ext3_mark_iloc_dirty(handle_t *handle,
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 622e88249024..b79f04bf72fc 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -441,7 +441,7 @@ static void ext3_put_super (struct super_block * sb)
percpu_counter_destroy(&sbi->s_dirs_counter);
brelse(sbi->s_sbh);
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT3_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
@@ -1555,7 +1555,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
/* Needed for iput() to work correctly and not trash data */
sb->s_flags |= MS_ACTIVE;
/* Turn on quotas so that they are updated correctly */
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT3_MAXQUOTAS; i++) {
if (EXT3_SB(sb)->s_qf_names[i]) {
int ret = ext3_quota_on_mount(sb, i);
if (ret < 0)
@@ -1606,7 +1606,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
/* Turn quotas off */
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT3_MAXQUOTAS; i++) {
if (sb_dqopt(sb)->files[i])
dquot_quota_off(sb, i);
}
@@ -2139,7 +2139,7 @@ failed_mount2:
kfree(sbi->s_group_desc);
failed_mount:
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT3_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
ext3_blkdev_remove(sbi);
@@ -2659,7 +2659,7 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
old_opts.s_commit_interval = sbi->s_commit_interval;
#ifdef CONFIG_QUOTA
old_opts.s_jquota_fmt = sbi->s_jquota_fmt;
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT3_MAXQUOTAS; i++)
if (sbi->s_qf_names[i]) {
old_opts.s_qf_names[i] = kstrdup(sbi->s_qf_names[i],
GFP_KERNEL);
@@ -2763,7 +2763,7 @@ static int ext3_remount (struct super_block * sb, int * flags, char * data)
}
#ifdef CONFIG_QUOTA
/* Release old quota file names */
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT3_MAXQUOTAS; i++)
kfree(old_opts.s_qf_names[i]);
#endif
if (enable_quota)
@@ -2777,7 +2777,7 @@ restore_opts:
sbi->s_commit_interval = old_opts.s_commit_interval;
#ifdef CONFIG_QUOTA
sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT3_MAXQUOTAS; i++) {
kfree(sbi->s_qf_names[i]);
sbi->s_qf_names[i] = old_opts.s_qf_names[i];
}
--
1.8.1.4
next parent reply other threads:[~2014-09-10 19:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1410376972-18417-1-git-send-email-jack@suse.cz>
2014-09-10 19:22 ` Jan Kara [this message]
2014-09-10 19:22 ` [PATCH 2/5] ext4: Don't use MAXQUOTAS value Jan Kara
2014-09-11 15:16 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410376972-18417-2-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).