* LTTng 0.89 for Linux 2.6.29-rc3 @ 2009-01-30 20:07 Mathieu Desnoyers 2009-02-05 14:04 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-01-30 20:07 UTC (permalink / raw) To: ltt-dev, linux-kernel, Paul E. McKenney, Theodore Ts'o, Ext4 Developers List Hi, I just ported LTTng to the 2.6.29-rc3 kernel. It includes the following changes : - Tree RCU instrumentation - Updated ext4 and jbd2 instrumentation Please feel free to try it and report any success/problem you may have. Note that cross-build has been slightly less tested this time because I'll have to upgrade many of my compilers to a version compatible with kernel 2.6.29-rc. It also includes the recently added kprobes support through a simple echo symbol_name > /mnt/debugfs/ltt/kprobes/enable It's available at the new LTTng website : http://www.lttng.org/ Thanks, Mathieu -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: LTTng 0.89 for Linux 2.6.29-rc3 2009-01-30 20:07 LTTng 0.89 for Linux 2.6.29-rc3 Mathieu Desnoyers @ 2009-02-05 14:04 ` Paul E. McKenney 2009-02-05 15:02 ` Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-05 14:04 UTC (permalink / raw) To: Mathieu Desnoyers Cc: ltt-dev, linux-kernel, Theodore Ts'o, Ext4 Developers List On Fri, Jan 30, 2009 at 03:07:57PM -0500, Mathieu Desnoyers wrote: > Hi, > > I just ported LTTng to the 2.6.29-rc3 kernel. It includes the following > changes : > > - Tree RCU instrumentation > - Updated ext4 and jbd2 instrumentation > > Please feel free to try it and report any success/problem you may have. > Note that cross-build has been slightly less tested this time because > I'll have to upgrade many of my compilers to a version compatible with > kernel 2.6.29-rc. > > It also includes the recently added kprobes support through a simple > > echo symbol_name > /mnt/debugfs/ltt/kprobes/enable > > It's available at the new LTTng website : > > http://www.lttng.org/ Hello, Matheiu, When I try to apply this to v2.6.29-rc3, I get the following: can't find file to patch at input line 61 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |get_ltt_root() is necessary for ltt-trace-control to create subdirs in ltt's |debugfs dir. | |From: Zhao Lei <zhaolei@cn.fujitsu.com> |Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> |Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> |--- | include/linux/ltt-core.h | 8 ++++++++ | ltt/ltt-core.c | 14 ++++++++++++++ | ltt/ltt-relay.c | 8 +------- | 3 files changed, 23 insertions(+), 7 deletions(-) | |Index: linux-2.6-lttng/include/linux/ltt-core.h |=================================================================== |--- linux-2.6-lttng.orig/include/linux/ltt-core.h 2009-01-15 15:55:18.000000000 -0500 |+++ linux-2.6-lttng/include/linux/ltt-core.h 2009-01-15 15:55:24.000000000 -0500 Help? Thanx, Paul ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 14:04 ` Paul E. McKenney @ 2009-02-05 15:02 ` Mathieu Desnoyers 2009-02-05 15:18 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-05 15:02 UTC (permalink / raw) To: Paul E. McKenney Cc: ltt-dev, linux-kernel, Theodore Ts'o, Ext4 Developers List * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Fri, Jan 30, 2009 at 03:07:57PM -0500, Mathieu Desnoyers wrote: > > Hi, > > > > I just ported LTTng to the 2.6.29-rc3 kernel. It includes the following > > changes : > > > > - Tree RCU instrumentation > > - Updated ext4 and jbd2 instrumentation > > > > Please feel free to try it and report any success/problem you may have. > > Note that cross-build has been slightly less tested this time because > > I'll have to upgrade many of my compilers to a version compatible with > > kernel 2.6.29-rc. > > > > It also includes the recently added kprobes support through a simple > > > > echo symbol_name > /mnt/debugfs/ltt/kprobes/enable > > > > It's available at the new LTTng website : > > > > http://www.lttng.org/ > > Hello, Matheiu, > > When I try to apply this to v2.6.29-rc3, I get the following: > > can't find file to patch at input line 61 > Perhaps you used the wrong -p or --strip option? > The text leading up to this was: > -------------------------- > |get_ltt_root() is necessary for ltt-trace-control to create subdirs in > ltt's > |debugfs dir. > | > |From: Zhao Lei <zhaolei@cn.fujitsu.com> > |Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> > |Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > |--- > | include/linux/ltt-core.h | 8 ++++++++ > | ltt/ltt-core.c | 14 ++++++++++++++ > | ltt/ltt-relay.c | 8 +------- > | 3 files changed, 23 insertions(+), 7 deletions(-) > | > |Index: linux-2.6-lttng/include/linux/ltt-core.h > |=================================================================== > |--- linux-2.6-lttng.orig/include/linux/ltt-core.h 2009-01-15 > 15:55:18.000000000 -0500 > |+++ linux-2.6-lttng/include/linux/ltt-core.h 2009-01-15 > 15:55:24.000000000 -0500 > > Help? > Hi Paul, I must admit I'm a bit puzzled. I've tried to quilt push -a both LTTng 0.89 and LTTng 0.92 taken from the website and they both apply correctly on 2.6.29-rc3. When I quilt pop -a, neither of those 3 files (include/linux/ltt-core.h, ltt/ltt-core.c, ltt/ltt-relay.c) are stucked in my tree. I've used files from : http://www.lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 Which tarballs are you using exactly ? I guess you need to apply them to your existing tree, so pointing you to git.kernel.org lttng tree won't help much here. Mathieu > Thanx, Paul -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 15:02 ` Mathieu Desnoyers @ 2009-02-05 15:18 ` Paul E. McKenney 2009-02-05 15:38 ` [ltt-dev] " Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-05 15:18 UTC (permalink / raw) To: Mathieu Desnoyers Cc: ltt-dev, linux-kernel, Theodore Ts'o, Ext4 Developers List On Thu, Feb 05, 2009 at 10:02:42AM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Fri, Jan 30, 2009 at 03:07:57PM -0500, Mathieu Desnoyers wrote: > > > Hi, > > > > > > I just ported LTTng to the 2.6.29-rc3 kernel. It includes the following > > > changes : > > > > > > - Tree RCU instrumentation > > > - Updated ext4 and jbd2 instrumentation > > > > > > Please feel free to try it and report any success/problem you may have. > > > Note that cross-build has been slightly less tested this time because > > > I'll have to upgrade many of my compilers to a version compatible with > > > kernel 2.6.29-rc. > > > > > > It also includes the recently added kprobes support through a simple > > > > > > echo symbol_name > /mnt/debugfs/ltt/kprobes/enable > > > > > > It's available at the new LTTng website : > > > > > > http://www.lttng.org/ > > > > Hello, Matheiu, > > > > When I try to apply this to v2.6.29-rc3, I get the following: > > > > can't find file to patch at input line 61 > > Perhaps you used the wrong -p or --strip option? > > The text leading up to this was: > > -------------------------- > > |get_ltt_root() is necessary for ltt-trace-control to create subdirs in > > ltt's > > |debugfs dir. > > | > > |From: Zhao Lei <zhaolei@cn.fujitsu.com> > > |Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> > > |Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > > |--- > > | include/linux/ltt-core.h | 8 ++++++++ > > | ltt/ltt-core.c | 14 ++++++++++++++ > > | ltt/ltt-relay.c | 8 +------- > > | 3 files changed, 23 insertions(+), 7 deletions(-) > > | > > |Index: linux-2.6-lttng/include/linux/ltt-core.h > > |=================================================================== > > |--- linux-2.6-lttng.orig/include/linux/ltt-core.h 2009-01-15 > > 15:55:18.000000000 -0500 > > |+++ linux-2.6-lttng/include/linux/ltt-core.h 2009-01-15 > > 15:55:24.000000000 -0500 > > > > Help? > > > > Hi Paul, > > I must admit I'm a bit puzzled. I've tried to quilt push -a both > LTTng 0.89 and LTTng 0.92 taken from the website and they both apply > correctly on 2.6.29-rc3. When I quilt pop -a, neither of those 3 files > (include/linux/ltt-core.h, ltt/ltt-core.c, ltt/ltt-relay.c) are stucked > in my tree. > > I've used files from : > > http://www.lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > Which tarballs are you using exactly ? That is indeed the one that I am using. > I guess you need to apply them to your existing tree, so pointing you to > git.kernel.org lttng tree won't help much here. I am attempting to apply to v2.6.29-rc3, which is commit 18e352e4a73465349711a9324767e1b2453383e2 in the linux-2.6 git tree. Later on, I might well want to apply on top of some other stuff, but figured I should try it straight first. ;-) Thanx, Paul > Mathieu > > > Thanx, Paul > > -- > Mathieu Desnoyers > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 15:18 ` Paul E. McKenney @ 2009-02-05 15:38 ` Mathieu Desnoyers 2009-02-05 15:58 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-05 15:38 UTC (permalink / raw) To: Paul E. McKenney Cc: Ext4 Developers List, ltt-dev, Theodore Ts'o, linux-kernel * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Thu, Feb 05, 2009 at 10:02:42AM -0500, Mathieu Desnoyers wrote: > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > On Fri, Jan 30, 2009 at 03:07:57PM -0500, Mathieu Desnoyers wrote: > > > > Hi, > > > > > > > > I just ported LTTng to the 2.6.29-rc3 kernel. It includes the following > > > > changes : > > > > > > > > - Tree RCU instrumentation > > > > - Updated ext4 and jbd2 instrumentation > > > > > > > > Please feel free to try it and report any success/problem you may have. > > > > Note that cross-build has been slightly less tested this time because > > > > I'll have to upgrade many of my compilers to a version compatible with > > > > kernel 2.6.29-rc. > > > > > > > > It also includes the recently added kprobes support through a simple > > > > > > > > echo symbol_name > /mnt/debugfs/ltt/kprobes/enable > > > > > > > > It's available at the new LTTng website : > > > > > > > > http://www.lttng.org/ > > > > > > Hello, Matheiu, > > > > > > When I try to apply this to v2.6.29-rc3, I get the following: > > > > > > can't find file to patch at input line 61 > > > Perhaps you used the wrong -p or --strip option? > > > The text leading up to this was: > > > -------------------------- > > > |get_ltt_root() is necessary for ltt-trace-control to create subdirs in > > > ltt's > > > |debugfs dir. > > > | > > > |From: Zhao Lei <zhaolei@cn.fujitsu.com> > > > |Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> > > > |Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > > > |--- > > > | include/linux/ltt-core.h | 8 ++++++++ > > > | ltt/ltt-core.c | 14 ++++++++++++++ > > > | ltt/ltt-relay.c | 8 +------- > > > | 3 files changed, 23 insertions(+), 7 deletions(-) > > > | > > > |Index: linux-2.6-lttng/include/linux/ltt-core.h > > > |=================================================================== > > > |--- linux-2.6-lttng.orig/include/linux/ltt-core.h 2009-01-15 > > > 15:55:18.000000000 -0500 > > > |+++ linux-2.6-lttng/include/linux/ltt-core.h 2009-01-15 > > > 15:55:24.000000000 -0500 > > > > > > Help? > > > > > > > Hi Paul, > > > > I must admit I'm a bit puzzled. I've tried to quilt push -a both > > LTTng 0.89 and LTTng 0.92 taken from the website and they both apply > > correctly on 2.6.29-rc3. When I quilt pop -a, neither of those 3 files > > (include/linux/ltt-core.h, ltt/ltt-core.c, ltt/ltt-relay.c) are stucked > > in my tree. > > > > I've used files from : > > > > http://www.lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > > Which tarballs are you using exactly ? > > That is indeed the one that I am using. > > > I guess you need to apply them to your existing tree, so pointing you to > > git.kernel.org lttng tree won't help much here. > > I am attempting to apply to v2.6.29-rc3, which is commit > 18e352e4a73465349711a9324767e1b2453383e2 in the linux-2.6 git tree. > > Later on, I might well want to apply on top of some other stuff, but > figured I should try it straight first. ;-) > Are you using quilt to apply the patchset series file in the right order ? Mathieu > Thanx, Paul > > > Mathieu > > > > > Thanx, Paul > > > > -- > > Mathieu Desnoyers > > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > _______________________________________________ > ltt-dev mailing list > ltt-dev@lists.casi.polymtl.ca > http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev > -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 15:38 ` [ltt-dev] " Mathieu Desnoyers @ 2009-02-05 15:58 ` Paul E. McKenney 2009-02-05 16:22 ` Trilok Soni 2009-02-05 16:28 ` Trilok Soni 0 siblings, 2 replies; 20+ messages in thread From: Paul E. McKenney @ 2009-02-05 15:58 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Ext4 Developers List, ltt-dev, Theodore Ts'o, linux-kernel On Thu, Feb 05, 2009 at 10:38:25AM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Thu, Feb 05, 2009 at 10:02:42AM -0500, Mathieu Desnoyers wrote: > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > On Fri, Jan 30, 2009 at 03:07:57PM -0500, Mathieu Desnoyers wrote: > > > > > Hi, > > > > > > > > > > I just ported LTTng to the 2.6.29-rc3 kernel. It includes the following > > > > > changes : > > > > > > > > > > - Tree RCU instrumentation > > > > > - Updated ext4 and jbd2 instrumentation > > > > > > > > > > Please feel free to try it and report any success/problem you may have. > > > > > Note that cross-build has been slightly less tested this time because > > > > > I'll have to upgrade many of my compilers to a version compatible with > > > > > kernel 2.6.29-rc. > > > > > > > > > > It also includes the recently added kprobes support through a simple > > > > > > > > > > echo symbol_name > /mnt/debugfs/ltt/kprobes/enable > > > > > > > > > > It's available at the new LTTng website : > > > > > > > > > > http://www.lttng.org/ > > > > > > > > Hello, Matheiu, > > > > > > > > When I try to apply this to v2.6.29-rc3, I get the following: > > > > > > > > can't find file to patch at input line 61 > > > > Perhaps you used the wrong -p or --strip option? > > > > The text leading up to this was: > > > > -------------------------- > > > > |get_ltt_root() is necessary for ltt-trace-control to create subdirs in > > > > ltt's > > > > |debugfs dir. > > > > | > > > > |From: Zhao Lei <zhaolei@cn.fujitsu.com> > > > > |Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> > > > > |Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > > > > |--- > > > > | include/linux/ltt-core.h | 8 ++++++++ > > > > | ltt/ltt-core.c | 14 ++++++++++++++ > > > > | ltt/ltt-relay.c | 8 +------- > > > > | 3 files changed, 23 insertions(+), 7 deletions(-) > > > > | > > > > |Index: linux-2.6-lttng/include/linux/ltt-core.h > > > > |=================================================================== > > > > |--- linux-2.6-lttng.orig/include/linux/ltt-core.h 2009-01-15 > > > > 15:55:18.000000000 -0500 > > > > |+++ linux-2.6-lttng/include/linux/ltt-core.h 2009-01-15 > > > > 15:55:24.000000000 -0500 > > > > > > > > Help? > > > > > > > > > > Hi Paul, > > > > > > I must admit I'm a bit puzzled. I've tried to quilt push -a both > > > LTTng 0.89 and LTTng 0.92 taken from the website and they both apply > > > correctly on 2.6.29-rc3. When I quilt pop -a, neither of those 3 files > > > (include/linux/ltt-core.h, ltt/ltt-core.c, ltt/ltt-relay.c) are stucked > > > in my tree. > > > > > > I've used files from : > > > > > > http://www.lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > > > > Which tarballs are you using exactly ? > > > > That is indeed the one that I am using. > > > > > I guess you need to apply them to your existing tree, so pointing you to > > > git.kernel.org lttng tree won't help much here. > > > > I am attempting to apply to v2.6.29-rc3, which is commit > > 18e352e4a73465349711a9324767e1b2453383e2 in the linux-2.6 git tree. > > > > Later on, I might well want to apply on top of some other stuff, but > > figured I should try it straight first. ;-) > > > > Are you using quilt to apply the patchset series file in the right order ? Ummm... No. I never have used quilt. Ah, there is a series file. I guess it would not be too hard to make an appropriate "sh" command: cat /tmp/patch-2.6.29-rc3-lttng-0.92/series | grep -v '^#' | sed -e 's/^/patch -p1 < \/tmp\/patch-2.6.29-rc3-lttng-0.92\//' | sh But this complains about directories. OK, "sudo apt-get install quilt" followed by "man quilt". Than "quilt import" seems to do some of the work, but doesn't seem to apply all the patches. Thank goodness for "git reset --hard"!!! Help? Thanx, Paul > Mathieu > > > Thanx, Paul > > > > > Mathieu > > > > > > > Thanx, Paul > > > > > > -- > > > Mathieu Desnoyers > > > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 > > > -- > > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > Please read the FAQ at http://www.tux.org/lkml/ > > > > _______________________________________________ > > ltt-dev mailing list > > ltt-dev@lists.casi.polymtl.ca > > http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev > > > > -- > Mathieu Desnoyers > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 15:58 ` Paul E. McKenney @ 2009-02-05 16:22 ` Trilok Soni 2009-02-05 18:01 ` Paul E. McKenney 2009-02-05 16:28 ` Trilok Soni 1 sibling, 1 reply; 20+ messages in thread From: Trilok Soni @ 2009-02-05 16:22 UTC (permalink / raw) To: paulmck Cc: Mathieu Desnoyers, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel Hi Paul, On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote: >> >> Are you using quilt to apply the patchset series file in the right order ? > > Ummm... No. I never have used quilt. > > Ah, there is a series file. I guess it would not be too hard to make > an appropriate "sh" command: > How about trying? #quilt push -a -- ---Trilok Soni http://triloksoni.wordpress.com http://www.linkedin.com/in/triloksoni ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 16:22 ` Trilok Soni @ 2009-02-05 18:01 ` Paul E. McKenney 2009-02-05 18:31 ` Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-05 18:01 UTC (permalink / raw) To: Trilok Soni Cc: Mathieu Desnoyers, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > Hi Paul, > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > <paulmck@linux.vnet.ibm.com> wrote: > >> > >> Are you using quilt to apply the patchset series file in the right order ? > > > > Ummm... No. I never have used quilt. > > > > Ah, there is a series file. I guess it would not be too hard to make > > an appropriate "sh" command: > > How about trying? > > #quilt push -a Is the appropriate incantation as follows? cd <top of git tree> mkdir patches cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches quilt push -a Thanx, Paul ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 18:01 ` Paul E. McKenney @ 2009-02-05 18:31 ` Mathieu Desnoyers 2009-02-05 18:44 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-05 18:31 UTC (permalink / raw) To: Paul E. McKenney Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > Hi Paul, > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > <paulmck@linux.vnet.ibm.com> wrote: > > >> > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > Ummm... No. I never have used quilt. > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > an appropriate "sh" command: > > > > How about trying? > > > > #quilt push -a > > Is the appropriate incantation as follows? > > cd <top of git tree> > mkdir patches > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > quilt push -a > Yes, exactly. And from there you can follow the LTTng manual here : http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html Mathieu > Thanx, Paul > -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 18:31 ` Mathieu Desnoyers @ 2009-02-05 18:44 ` Paul E. McKenney 2009-02-05 20:22 ` Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-05 18:44 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > Hi Paul, > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > <paulmck@linux.vnet.ibm.com> wrote: > > > >> > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > an appropriate "sh" command: > > > > > > How about trying? > > > > > > #quilt push -a > > > > Is the appropriate incantation as follows? > > > > cd <top of git tree> > > mkdir patches > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > quilt push -a > > > > Yes, exactly. Whew! ;-) > And from there you can follow the LTTng manual here : > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html I get some fuzz and the following: patching file kernel/trace/trace-clock-32-to-64.c Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, which already exists. Hunk #1 FAILED at 1. 1 out of 1 hunk FAILED -- rejects in file kernel/trace/trace-clock-32-to-64.c Should I be starting from somewhere other than v2.6.29-rc3? Thanx, Paul ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 18:44 ` Paul E. McKenney @ 2009-02-05 20:22 ` Mathieu Desnoyers 2009-02-05 21:04 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-05 20:22 UTC (permalink / raw) To: Paul E. McKenney Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > Hi Paul, > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > >> > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > an appropriate "sh" command: > > > > > > > > How about trying? > > > > > > > > #quilt push -a > > > > > > Is the appropriate incantation as follows? > > > > > > cd <top of git tree> > > > mkdir patches > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > quilt push -a > > > > > > > Yes, exactly. > > Whew! ;-) > > > And from there you can follow the LTTng manual here : > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > I get some fuzz and the following: > > patching file kernel/trace/trace-clock-32-to-64.c > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > which already exists. > Hunk #1 FAILED at 1. > 1 out of 1 hunk FAILED -- rejects in file > kernel/trace/trace-clock-32-to-64.c > > Should I be starting from somewhere other than v2.6.29-rc3? > Let's see it step by step, that should get us there. With patches : mkdir ~/lttng cd ~/lttng wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - cd linux-2.6.29-rc3 mkdir patches ln -s ../patch-2.6.29-rc3-lttng-0.92 patches quilt push -a Does this work ? Mathieu -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 20:22 ` Mathieu Desnoyers @ 2009-02-05 21:04 ` Paul E. McKenney 2009-02-05 21:06 ` Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-05 21:04 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > Hi Paul, > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > >> > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > an appropriate "sh" command: > > > > > > > > > > How about trying? > > > > > > > > > > #quilt push -a > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > cd <top of git tree> > > > > mkdir patches > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > quilt push -a > > > > > > > > > > Yes, exactly. > > > > Whew! ;-) > > > > > And from there you can follow the LTTng manual here : > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > I get some fuzz and the following: > > > > patching file kernel/trace/trace-clock-32-to-64.c > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > which already exists. > > Hunk #1 FAILED at 1. > > 1 out of 1 hunk FAILED -- rejects in file > > kernel/trace/trace-clock-32-to-64.c > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > Let's see it step by step, that should get us there. > > With patches : > > mkdir ~/lttng > cd ~/lttng > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > cd linux-2.6.29-rc3 > mkdir patches > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > quilt push -a > > Does this work ? Leaving out the "mkdir", yes. My apologies -- I was forgetting that "git reset --hard" doesn't get rid of untracked files. I do see fuzz in a few places, but hopefully this is non-fatal. And in any case, I can now make the patch required to actually try this out. ;-) Thanx, Paul ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 21:04 ` Paul E. McKenney @ 2009-02-05 21:06 ` Mathieu Desnoyers 2009-02-06 0:33 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-05 21:06 UTC (permalink / raw) To: Paul E. McKenney Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > > Hi Paul, > > > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > > >> > > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > > an appropriate "sh" command: > > > > > > > > > > > > How about trying? > > > > > > > > > > > > #quilt push -a > > > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > > > cd <top of git tree> > > > > > mkdir patches > > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > > quilt push -a > > > > > > > > > > > > > Yes, exactly. > > > > > > Whew! ;-) > > > > > > > And from there you can follow the LTTng manual here : > > > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > > > I get some fuzz and the following: > > > > > > patching file kernel/trace/trace-clock-32-to-64.c > > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > > which already exists. > > > Hunk #1 FAILED at 1. > > > 1 out of 1 hunk FAILED -- rejects in file > > > kernel/trace/trace-clock-32-to-64.c > > > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > > > > Let's see it step by step, that should get us there. > > > > With patches : > > > > mkdir ~/lttng > > cd ~/lttng > > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > > cd linux-2.6.29-rc3 > > mkdir patches > > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > > quilt push -a > > > > Does this work ? > > Leaving out the "mkdir", yes. Ah, yes, my mistake. > My apologies -- I was forgetting that > "git reset --hard" doesn't get rid of untracked files. I do see fuzz > in a few places, but hopefully this is non-fatal. And in any case, I > can now make the patch required to actually try this out. ;-) > Great ! Don't hesitate to ask if you have any question. Mathieu > Thanx, Paul > -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 21:06 ` Mathieu Desnoyers @ 2009-02-06 0:33 ` Paul E. McKenney 2009-02-06 2:00 ` Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-06 0:33 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Thu, Feb 05, 2009 at 04:06:27PM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > > > Hi Paul, > > > > > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > > > >> > > > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > > > an appropriate "sh" command: > > > > > > > > > > > > > > How about trying? > > > > > > > > > > > > > > #quilt push -a > > > > > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > > > > > cd <top of git tree> > > > > > > mkdir patches > > > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > > > quilt push -a > > > > > > > > > > > > > > > > Yes, exactly. > > > > > > > > Whew! ;-) > > > > > > > > > And from there you can follow the LTTng manual here : > > > > > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > > > > > I get some fuzz and the following: > > > > > > > > patching file kernel/trace/trace-clock-32-to-64.c > > > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > > > which already exists. > > > > Hunk #1 FAILED at 1. > > > > 1 out of 1 hunk FAILED -- rejects in file > > > > kernel/trace/trace-clock-32-to-64.c > > > > > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > > > > > > > Let's see it step by step, that should get us there. > > > > > > With patches : > > > > > > mkdir ~/lttng > > > cd ~/lttng > > > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > > > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > > > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > > > cd linux-2.6.29-rc3 > > > mkdir patches > > > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > > > quilt push -a > > > > > > Does this work ? > > > > Leaving out the "mkdir", yes. > > Ah, yes, my mistake. > > > My apologies -- I was forgetting that > > "git reset --hard" doesn't get rid of untracked files. I do see fuzz > > in a few places, but hopefully this is non-fatal. And in any case, I > > can now make the patch required to actually try this out. ;-) > > > > Great ! > > Don't hesitate to ask if you have any question. > > Mathieu Fails to build on Power, so trying x86... (Stock 2.6.29-rc3 does build and boot, FWIW.) Looks like misplaced file. Thanx, Paul ------------------------------------------------------------------------ CHK include/linux/version.h UPD include/linux/version.h CHK include/linux/utsrelease.h UPD include/linux/utsrelease.h SYMLINK include/asm -> include/asm-powerpc HOSTCC scripts/ihex2fw HOSTCC scripts/kallsyms HOSTCC scripts/pnmtologo HOSTCC scripts/genksyms/genksyms.o HOSTCC scripts/conmakehash HOSTCC scripts/bin2c CC scripts/mod/empty.o HOSTCC scripts/mod/mk_elfconfig SHIPPED scripts/genksyms/lex.c SHIPPED scripts/genksyms/parse.h SHIPPED scripts/genksyms/keywords.c SHIPPED scripts/genksyms/parse.c HOSTCC scripts/genksyms/parse.o HOSTCC scripts/genksyms/lex.o MKELF scripts/mod/elfconfig.h HOSTCC scripts/mod/file2alias.o HOSTCC scripts/mod/modpost.o HOSTCC scripts/mod/sumversion.o HOSTLD scripts/genksyms/genksyms HOSTLD scripts/mod/modpost CC kernel/bounds.s GEN include/linux/bounds.h CC arch/powerpc/kernel/asm-offsets.s In file included from include/linux/module.h:18, from include/linux/sysdev.h:25, from include/linux/node.h:22, from include/linux/swap.h:10, from include/linux/suspend.h:7, from arch/powerpc/kernel/asm-offsets.c:24: include/linux/immediate.h:15:27: error: asm/immediate.h: No such file or directory In file included from include/linux/module.h:18, from include/linux/sysdev.h:25, from include/linux/node.h:22, from include/linux/swap.h:10, from include/linux/suspend.h:7, from arch/powerpc/kernel/asm-offsets.c:24: include/linux/immediate.h:37: warning: ‘struct __imv’ declared inside parameter list include/linux/immediate.h:37: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/immediate.h:40: warning: ‘struct __imv’ declared inside parameter list make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 make: *** [prepare0] Error 2 02/05/2009-17:57:41 Build the kernel. Failed rc = 2 02/05/2009-17:57:41 build: Building kernel... Failed rc = 1 -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-06 0:33 ` Paul E. McKenney @ 2009-02-06 2:00 ` Mathieu Desnoyers 2009-02-06 13:48 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-06 2:00 UTC (permalink / raw) To: Paul E. McKenney Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Thu, Feb 05, 2009 at 04:06:27PM -0500, Mathieu Desnoyers wrote: > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > > > > Hi Paul, > > > > > > > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > > > > >> > > > > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > > > > an appropriate "sh" command: > > > > > > > > > > > > > > > > How about trying? > > > > > > > > > > > > > > > > #quilt push -a > > > > > > > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > > > > > > > cd <top of git tree> > > > > > > > mkdir patches > > > > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > > > > quilt push -a > > > > > > > > > > > > > > > > > > > Yes, exactly. > > > > > > > > > > Whew! ;-) > > > > > > > > > > > And from there you can follow the LTTng manual here : > > > > > > > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > > > > > > > I get some fuzz and the following: > > > > > > > > > > patching file kernel/trace/trace-clock-32-to-64.c > > > > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > > > > which already exists. > > > > > Hunk #1 FAILED at 1. > > > > > 1 out of 1 hunk FAILED -- rejects in file > > > > > kernel/trace/trace-clock-32-to-64.c > > > > > > > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > > > > > > > > > > Let's see it step by step, that should get us there. > > > > > > > > With patches : > > > > > > > > mkdir ~/lttng > > > > cd ~/lttng > > > > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > > > > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > > > > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > > > > cd linux-2.6.29-rc3 > > > > mkdir patches > > > > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > > > > quilt push -a > > > > > > > > Does this work ? > > > > > > Leaving out the "mkdir", yes. > > > > Ah, yes, my mistake. > > > > > My apologies -- I was forgetting that > > > "git reset --hard" doesn't get rid of untracked files. I do see fuzz > > > in a few places, but hopefully this is non-fatal. And in any case, I > > > can now make the patch required to actually try this out. ;-) > > > > > > > Great ! > > > > Don't hesitate to ask if you have any question. > > > > Mathieu > > Fails to build on Power, so trying x86... (Stock 2.6.29-rc3 does > build and boot, FWIW.) > > Looks like misplaced file. > > Thanx, Paul > > ------------------------------------------------------------------------ > > CHK include/linux/version.h > UPD include/linux/version.h > CHK include/linux/utsrelease.h > UPD include/linux/utsrelease.h > SYMLINK include/asm -> include/asm-powerpc > HOSTCC scripts/ihex2fw > HOSTCC scripts/kallsyms > HOSTCC scripts/pnmtologo > HOSTCC scripts/genksyms/genksyms.o > HOSTCC scripts/conmakehash > HOSTCC scripts/bin2c > CC scripts/mod/empty.o > HOSTCC scripts/mod/mk_elfconfig > SHIPPED scripts/genksyms/lex.c > SHIPPED scripts/genksyms/parse.h > SHIPPED scripts/genksyms/keywords.c > SHIPPED scripts/genksyms/parse.c > HOSTCC scripts/genksyms/parse.o > HOSTCC scripts/genksyms/lex.o > MKELF scripts/mod/elfconfig.h > HOSTCC scripts/mod/file2alias.o > HOSTCC scripts/mod/modpost.o > HOSTCC scripts/mod/sumversion.o > HOSTLD scripts/genksyms/genksyms > HOSTLD scripts/mod/modpost > CC kernel/bounds.s > GEN include/linux/bounds.h > CC arch/powerpc/kernel/asm-offsets.s > In file included from include/linux/module.h:18, > from include/linux/sysdev.h:25, > from include/linux/node.h:22, > from include/linux/swap.h:10, > from include/linux/suspend.h:7, > from arch/powerpc/kernel/asm-offsets.c:24: > include/linux/immediate.h:15:27: error: asm/immediate.h: No such file or directory > In file included from include/linux/module.h:18, > from include/linux/sysdev.h:25, > from include/linux/node.h:22, > from include/linux/swap.h:10, > from include/linux/suspend.h:7, > from arch/powerpc/kernel/asm-offsets.c:24: > include/linux/immediate.h:37: warning: ‘struct __imv’ declared > inside parameter list > include/linux/immediate.h:37: warning: its scope is only this definition > or declaration, which is probably not what you want > include/linux/immediate.h:40: warning: ‘struct __imv’ declared > inside parameter list > make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 > make: *** [prepare0] Error 2 > 02/05/2009-17:57:41 Build the kernel. Failed rc = 2 > 02/05/2009-17:57:41 build: Building kernel... Failed rc = 1 > Hrm, does the file arch/powerpc/include/asm/immediate.h exist in your tree ? Here, with the setup done following the commands I gave you (minus the mkdir patch), I get : compudj@ok:~$ head testpaulmck/linux-2.6.29-rc3/arch/powerpc/include/asm/immediate.h #ifndef _ASM_POWERPC_IMMEDIATE_H #define _ASM_POWERPC_IMMEDIATE_H /* * Immediate values. PowerPC architecture optimizations. * * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> * * This file is released under the GPLv2. * See the file COPYING for more details. .... Which defines struct __imv. So hrm, normally the header should be there. (/me still confused) :) Mathieu -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-06 2:00 ` Mathieu Desnoyers @ 2009-02-06 13:48 ` Paul E. McKenney 2009-02-06 20:03 ` Mathieu Desnoyers 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-06 13:48 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Thu, Feb 05, 2009 at 09:00:05PM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Thu, Feb 05, 2009 at 04:06:27PM -0500, Mathieu Desnoyers wrote: > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > > > > > Hi Paul, > > > > > > > > > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > > > > > >> > > > > > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > > > > > an appropriate "sh" command: > > > > > > > > > > > > > > > > > > How about trying? > > > > > > > > > > > > > > > > > > #quilt push -a > > > > > > > > > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > > > > > > > > > cd <top of git tree> > > > > > > > > mkdir patches > > > > > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > > > > > quilt push -a > > > > > > > > > > > > > > > > > > > > > > Yes, exactly. > > > > > > > > > > > > Whew! ;-) > > > > > > > > > > > > > And from there you can follow the LTTng manual here : > > > > > > > > > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > > > > > > > > > I get some fuzz and the following: > > > > > > > > > > > > patching file kernel/trace/trace-clock-32-to-64.c > > > > > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > > > > > which already exists. > > > > > > Hunk #1 FAILED at 1. > > > > > > 1 out of 1 hunk FAILED -- rejects in file > > > > > > kernel/trace/trace-clock-32-to-64.c > > > > > > > > > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > > > > > > > > > > > > > Let's see it step by step, that should get us there. > > > > > > > > > > With patches : > > > > > > > > > > mkdir ~/lttng > > > > > cd ~/lttng > > > > > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > > > > > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > > > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > > > > > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > > > > > cd linux-2.6.29-rc3 > > > > > mkdir patches > > > > > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > > > > > quilt push -a > > > > > > > > > > Does this work ? > > > > > > > > Leaving out the "mkdir", yes. > > > > > > Ah, yes, my mistake. > > > > > > > My apologies -- I was forgetting that > > > > "git reset --hard" doesn't get rid of untracked files. I do see fuzz > > > > in a few places, but hopefully this is non-fatal. And in any case, I > > > > can now make the patch required to actually try this out. ;-) > > > > > > > > > > Great ! > > > > > > Don't hesitate to ask if you have any question. > > > > > > Mathieu > > > > Fails to build on Power, so trying x86... (Stock 2.6.29-rc3 does > > build and boot, FWIW.) > > > > Looks like misplaced file. > > > > Thanx, Paul > > > > ------------------------------------------------------------------------ > > > > CHK include/linux/version.h > > UPD include/linux/version.h > > CHK include/linux/utsrelease.h > > UPD include/linux/utsrelease.h > > SYMLINK include/asm -> include/asm-powerpc > > HOSTCC scripts/ihex2fw > > HOSTCC scripts/kallsyms > > HOSTCC scripts/pnmtologo > > HOSTCC scripts/genksyms/genksyms.o > > HOSTCC scripts/conmakehash > > HOSTCC scripts/bin2c > > CC scripts/mod/empty.o > > HOSTCC scripts/mod/mk_elfconfig > > SHIPPED scripts/genksyms/lex.c > > SHIPPED scripts/genksyms/parse.h > > SHIPPED scripts/genksyms/keywords.c > > SHIPPED scripts/genksyms/parse.c > > HOSTCC scripts/genksyms/parse.o > > HOSTCC scripts/genksyms/lex.o > > MKELF scripts/mod/elfconfig.h > > HOSTCC scripts/mod/file2alias.o > > HOSTCC scripts/mod/modpost.o > > HOSTCC scripts/mod/sumversion.o > > HOSTLD scripts/genksyms/genksyms > > HOSTLD scripts/mod/modpost > > CC kernel/bounds.s > > GEN include/linux/bounds.h > > CC arch/powerpc/kernel/asm-offsets.s > > In file included from include/linux/module.h:18, > > from include/linux/sysdev.h:25, > > from include/linux/node.h:22, > > from include/linux/swap.h:10, > > from include/linux/suspend.h:7, > > from arch/powerpc/kernel/asm-offsets.c:24: > > include/linux/immediate.h:15:27: error: asm/immediate.h: No such file or directory > > In file included from include/linux/module.h:18, > > from include/linux/sysdev.h:25, > > from include/linux/node.h:22, > > from include/linux/swap.h:10, > > from include/linux/suspend.h:7, > > from arch/powerpc/kernel/asm-offsets.c:24: > > include/linux/immediate.h:37: warning: ‘struct __imv’ declared > > inside parameter list > > include/linux/immediate.h:37: warning: its scope is only this definition > > or declaration, which is probably not what you want > > include/linux/immediate.h:40: warning: ‘struct __imv’ declared > > inside parameter list > > make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 > > make: *** [prepare0] Error 2 > > 02/05/2009-17:57:41 Build the kernel. Failed rc = 2 > > 02/05/2009-17:57:41 build: Building kernel... Failed rc = 1 > > > > Hrm, does the file > > arch/powerpc/include/asm/immediate.h exist in your tree ? > > Here, with the setup done following the commands I gave you (minus the > mkdir patch), I get : > > > compudj@ok:~$ head testpaulmck/linux-2.6.29-rc3/arch/powerpc/include/asm/immediate.h > #ifndef _ASM_POWERPC_IMMEDIATE_H > #define _ASM_POWERPC_IMMEDIATE_H > > /* > * Immediate values. PowerPC architecture optimizations. > * > * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > * > * This file is released under the GPLv2. > * See the file COPYING for more details. > > .... > > Which defines struct __imv. So hrm, normally the header should be there. > (/me still confused) :) It does indeed, see the patch I generated against 2.6.29-rc3: http://www.rdrop.com/users/paulmck/patches/2.6.29-rc3-ltt-1.patch I get a similar failure on x86 -- perhaps my tools or build environment does not match yours? Thanx, Paul ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-06 13:48 ` Paul E. McKenney @ 2009-02-06 20:03 ` Mathieu Desnoyers 2009-02-06 21:37 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Mathieu Desnoyers @ 2009-02-06 20:03 UTC (permalink / raw) To: Paul E. McKenney Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > On Thu, Feb 05, 2009 at 09:00:05PM -0500, Mathieu Desnoyers wrote: > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > On Thu, Feb 05, 2009 at 04:06:27PM -0500, Mathieu Desnoyers wrote: > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > > > > > > Hi Paul, > > > > > > > > > > > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > > > > > > >> > > > > > > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > > > > > > an appropriate "sh" command: > > > > > > > > > > > > > > > > > > > > How about trying? > > > > > > > > > > > > > > > > > > > > #quilt push -a > > > > > > > > > > > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > > > > > > > > > > > cd <top of git tree> > > > > > > > > > mkdir patches > > > > > > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > > > > > > quilt push -a > > > > > > > > > > > > > > > > > > > > > > > > > Yes, exactly. > > > > > > > > > > > > > > Whew! ;-) > > > > > > > > > > > > > > > And from there you can follow the LTTng manual here : > > > > > > > > > > > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > > > > > > > > > > > I get some fuzz and the following: > > > > > > > > > > > > > > patching file kernel/trace/trace-clock-32-to-64.c > > > > > > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > > > > > > which already exists. > > > > > > > Hunk #1 FAILED at 1. > > > > > > > 1 out of 1 hunk FAILED -- rejects in file > > > > > > > kernel/trace/trace-clock-32-to-64.c > > > > > > > > > > > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > > > > > > > > > > > > > > > > Let's see it step by step, that should get us there. > > > > > > > > > > > > With patches : > > > > > > > > > > > > mkdir ~/lttng > > > > > > cd ~/lttng > > > > > > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > > > > > > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > > > > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > > > > > > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > > > > > > cd linux-2.6.29-rc3 > > > > > > mkdir patches > > > > > > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > > > > > > quilt push -a > > > > > > > > > > > > Does this work ? > > > > > > > > > > Leaving out the "mkdir", yes. > > > > > > > > Ah, yes, my mistake. > > > > > > > > > My apologies -- I was forgetting that > > > > > "git reset --hard" doesn't get rid of untracked files. I do see fuzz > > > > > in a few places, but hopefully this is non-fatal. And in any case, I > > > > > can now make the patch required to actually try this out. ;-) > > > > > > > > > > > > > Great ! > > > > > > > > Don't hesitate to ask if you have any question. > > > > > > > > Mathieu > > > > > > Fails to build on Power, so trying x86... (Stock 2.6.29-rc3 does > > > build and boot, FWIW.) > > > > > > Looks like misplaced file. > > > > > > Thanx, Paul > > > > > > ------------------------------------------------------------------------ > > > > > > CHK include/linux/version.h > > > UPD include/linux/version.h > > > CHK include/linux/utsrelease.h > > > UPD include/linux/utsrelease.h > > > SYMLINK include/asm -> include/asm-powerpc > > > HOSTCC scripts/ihex2fw > > > HOSTCC scripts/kallsyms > > > HOSTCC scripts/pnmtologo > > > HOSTCC scripts/genksyms/genksyms.o > > > HOSTCC scripts/conmakehash > > > HOSTCC scripts/bin2c > > > CC scripts/mod/empty.o > > > HOSTCC scripts/mod/mk_elfconfig > > > SHIPPED scripts/genksyms/lex.c > > > SHIPPED scripts/genksyms/parse.h > > > SHIPPED scripts/genksyms/keywords.c > > > SHIPPED scripts/genksyms/parse.c > > > HOSTCC scripts/genksyms/parse.o > > > HOSTCC scripts/genksyms/lex.o > > > MKELF scripts/mod/elfconfig.h > > > HOSTCC scripts/mod/file2alias.o > > > HOSTCC scripts/mod/modpost.o > > > HOSTCC scripts/mod/sumversion.o > > > HOSTLD scripts/genksyms/genksyms > > > HOSTLD scripts/mod/modpost > > > CC kernel/bounds.s > > > GEN include/linux/bounds.h > > > CC arch/powerpc/kernel/asm-offsets.s > > > In file included from include/linux/module.h:18, > > > from include/linux/sysdev.h:25, > > > from include/linux/node.h:22, > > > from include/linux/swap.h:10, > > > from include/linux/suspend.h:7, > > > from arch/powerpc/kernel/asm-offsets.c:24: > > > include/linux/immediate.h:15:27: error: asm/immediate.h: No such file or directory > > > In file included from include/linux/module.h:18, > > > from include/linux/sysdev.h:25, > > > from include/linux/node.h:22, > > > from include/linux/swap.h:10, > > > from include/linux/suspend.h:7, > > > from arch/powerpc/kernel/asm-offsets.c:24: > > > include/linux/immediate.h:37: warning: ‘struct __imv’ declared > > > inside parameter list > > > include/linux/immediate.h:37: warning: its scope is only this definition > > > or declaration, which is probably not what you want > > > include/linux/immediate.h:40: warning: ‘struct __imv’ declared > > > inside parameter list > > > make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 > > > make: *** [prepare0] Error 2 > > > 02/05/2009-17:57:41 Build the kernel. Failed rc = 2 > > > 02/05/2009-17:57:41 build: Building kernel... Failed rc = 1 > > > > > > > Hrm, does the file > > > > arch/powerpc/include/asm/immediate.h exist in your tree ? > > > > Here, with the setup done following the commands I gave you (minus the > > mkdir patch), I get : > > > > > > compudj@ok:~$ head testpaulmck/linux-2.6.29-rc3/arch/powerpc/include/asm/immediate.h > > #ifndef _ASM_POWERPC_IMMEDIATE_H > > #define _ASM_POWERPC_IMMEDIATE_H > > > > /* > > * Immediate values. PowerPC architecture optimizations. > > * > > * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > > * > > * This file is released under the GPLv2. > > * See the file COPYING for more details. > > > > .... > > > > Which defines struct __imv. So hrm, normally the header should be there. > > (/me still confused) :) > > It does indeed, see the patch I generated against 2.6.29-rc3: > > http://www.rdrop.com/users/paulmck/patches/2.6.29-rc3-ltt-1.patch > > I get a similar failure on x86 -- perhaps my tools or build environment > does not match yours? > Maybe. If you want a quick and dirty solution, try : CONFIG_IMMEDIATE=n Immediate values are just an optimization, not necessary anyway. Mathieu > Thanx, Paul > -- Mathieu Desnoyers OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68 -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-06 20:03 ` Mathieu Desnoyers @ 2009-02-06 21:37 ` Paul E. McKenney 2009-02-08 15:47 ` Paul E. McKenney 0 siblings, 1 reply; 20+ messages in thread From: Paul E. McKenney @ 2009-02-06 21:37 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Fri, Feb 06, 2009 at 03:03:29PM -0500, Mathieu Desnoyers wrote: > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > On Thu, Feb 05, 2009 at 09:00:05PM -0500, Mathieu Desnoyers wrote: > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > On Thu, Feb 05, 2009 at 04:06:27PM -0500, Mathieu Desnoyers wrote: > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > On Thu, Feb 05, 2009 at 03:22:49PM -0500, Mathieu Desnoyers wrote: > > > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > > > On Thu, Feb 05, 2009 at 01:31:59PM -0500, Mathieu Desnoyers wrote: > > > > > > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > > > > > > > > On Thu, Feb 05, 2009 at 09:52:16PM +0530, Trilok Soni wrote: > > > > > > > > > > > Hi Paul, > > > > > > > > > > > > > > > > > > > > > > On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney > > > > > > > > > > > <paulmck@linux.vnet.ibm.com> wrote: > > > > > > > > > > > >> > > > > > > > > > > > >> Are you using quilt to apply the patchset series file in the right order ? > > > > > > > > > > > > > > > > > > > > > > > > Ummm... No. I never have used quilt. > > > > > > > > > > > > > > > > > > > > > > > > Ah, there is a series file. I guess it would not be too hard to make > > > > > > > > > > > > an appropriate "sh" command: > > > > > > > > > > > > > > > > > > > > > > How about trying? > > > > > > > > > > > > > > > > > > > > > > #quilt push -a > > > > > > > > > > > > > > > > > > > > Is the appropriate incantation as follows? > > > > > > > > > > > > > > > > > > > > cd <top of git tree> > > > > > > > > > > mkdir patches > > > > > > > > > > cp /tmp/patch-2.6.29-rc3-lttng-0.92/* patches > > > > > > > > > > quilt push -a > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yes, exactly. > > > > > > > > > > > > > > > > Whew! ;-) > > > > > > > > > > > > > > > > > And from there you can follow the LTTng manual here : > > > > > > > > > > > > > > > > > > http://ltt.polymtl.ca/svn/trunk/lttv/LTTngManual.html > > > > > > > > > > > > > > > > I get some fuzz and the following: > > > > > > > > > > > > > > > > patching file kernel/trace/trace-clock-32-to-64.c > > > > > > > > Patch attempted to create file kernel/trace/trace-clock-32-to-64.c, > > > > > > > > which already exists. > > > > > > > > Hunk #1 FAILED at 1. > > > > > > > > 1 out of 1 hunk FAILED -- rejects in file > > > > > > > > kernel/trace/trace-clock-32-to-64.c > > > > > > > > > > > > > > > > Should I be starting from somewhere other than v2.6.29-rc3? > > > > > > > > > > > > > > > > > > > > > > Let's see it step by step, that should get us there. > > > > > > > > > > > > > > With patches : > > > > > > > > > > > > > > mkdir ~/lttng > > > > > > > cd ~/lttng > > > > > > > wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc3.tar.bz2 > > > > > > > wget http://lttng.org/files/lttng/patch-2.6.29-rc3-lttng-0.92.tar.bz2 > > > > > > > bzip2 -cd linux-2.6.29-rc3.tar.bz2 |tar xvof - > > > > > > > bzip2 -cd patch-2.6.29-rc3-lttng-0.92.tar.bz2 |tar xvof - > > > > > > > cd linux-2.6.29-rc3 > > > > > > > mkdir patches > > > > > > > ln -s ../patch-2.6.29-rc3-lttng-0.92 patches > > > > > > > quilt push -a > > > > > > > > > > > > > > Does this work ? > > > > > > > > > > > > Leaving out the "mkdir", yes. > > > > > > > > > > Ah, yes, my mistake. > > > > > > > > > > > My apologies -- I was forgetting that > > > > > > "git reset --hard" doesn't get rid of untracked files. I do see fuzz > > > > > > in a few places, but hopefully this is non-fatal. And in any case, I > > > > > > can now make the patch required to actually try this out. ;-) > > > > > > > > > > > > > > > > Great ! > > > > > > > > > > Don't hesitate to ask if you have any question. > > > > > > > > > > Mathieu > > > > > > > > Fails to build on Power, so trying x86... (Stock 2.6.29-rc3 does > > > > build and boot, FWIW.) > > > > > > > > Looks like misplaced file. > > > > > > > > Thanx, Paul > > > > > > > > ------------------------------------------------------------------------ > > > > > > > > CHK include/linux/version.h > > > > UPD include/linux/version.h > > > > CHK include/linux/utsrelease.h > > > > UPD include/linux/utsrelease.h > > > > SYMLINK include/asm -> include/asm-powerpc > > > > HOSTCC scripts/ihex2fw > > > > HOSTCC scripts/kallsyms > > > > HOSTCC scripts/pnmtologo > > > > HOSTCC scripts/genksyms/genksyms.o > > > > HOSTCC scripts/conmakehash > > > > HOSTCC scripts/bin2c > > > > CC scripts/mod/empty.o > > > > HOSTCC scripts/mod/mk_elfconfig > > > > SHIPPED scripts/genksyms/lex.c > > > > SHIPPED scripts/genksyms/parse.h > > > > SHIPPED scripts/genksyms/keywords.c > > > > SHIPPED scripts/genksyms/parse.c > > > > HOSTCC scripts/genksyms/parse.o > > > > HOSTCC scripts/genksyms/lex.o > > > > MKELF scripts/mod/elfconfig.h > > > > HOSTCC scripts/mod/file2alias.o > > > > HOSTCC scripts/mod/modpost.o > > > > HOSTCC scripts/mod/sumversion.o > > > > HOSTLD scripts/genksyms/genksyms > > > > HOSTLD scripts/mod/modpost > > > > CC kernel/bounds.s > > > > GEN include/linux/bounds.h > > > > CC arch/powerpc/kernel/asm-offsets.s > > > > In file included from include/linux/module.h:18, > > > > from include/linux/sysdev.h:25, > > > > from include/linux/node.h:22, > > > > from include/linux/swap.h:10, > > > > from include/linux/suspend.h:7, > > > > from arch/powerpc/kernel/asm-offsets.c:24: > > > > include/linux/immediate.h:15:27: error: asm/immediate.h: No such file or directory > > > > In file included from include/linux/module.h:18, > > > > from include/linux/sysdev.h:25, > > > > from include/linux/node.h:22, > > > > from include/linux/swap.h:10, > > > > from include/linux/suspend.h:7, > > > > from arch/powerpc/kernel/asm-offsets.c:24: > > > > include/linux/immediate.h:37: warning: ‘struct __imv’ declared > > > > inside parameter list > > > > include/linux/immediate.h:37: warning: its scope is only this definition > > > > or declaration, which is probably not what you want > > > > include/linux/immediate.h:40: warning: ‘struct __imv’ declared > > > > inside parameter list > > > > make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 > > > > make: *** [prepare0] Error 2 > > > > 02/05/2009-17:57:41 Build the kernel. Failed rc = 2 > > > > 02/05/2009-17:57:41 build: Building kernel... Failed rc = 1 > > > > > > > > > > Hrm, does the file > > > > > > arch/powerpc/include/asm/immediate.h exist in your tree ? > > > > > > Here, with the setup done following the commands I gave you (minus the > > > mkdir patch), I get : > > > > > > > > > compudj@ok:~$ head testpaulmck/linux-2.6.29-rc3/arch/powerpc/include/asm/immediate.h > > > #ifndef _ASM_POWERPC_IMMEDIATE_H > > > #define _ASM_POWERPC_IMMEDIATE_H > > > > > > /* > > > * Immediate values. PowerPC architecture optimizations. > > > * > > > * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > > > * > > > * This file is released under the GPLv2. > > > * See the file COPYING for more details. > > > > > > .... > > > > > > Which defines struct __imv. So hrm, normally the header should be there. > > > (/me still confused) :) > > > > It does indeed, see the patch I generated against 2.6.29-rc3: > > > > http://www.rdrop.com/users/paulmck/patches/2.6.29-rc3-ltt-1.patch > > > > I get a similar failure on x86 -- perhaps my tools or build environment > > does not match yours? > > > > Maybe. If you want a quick and dirty solution, try : > > CONFIG_IMMEDIATE=n > > Immediate values are just an optimization, not necessary anyway. K -- kicking it off. Thanx, Paul -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-06 21:37 ` Paul E. McKenney @ 2009-02-08 15:47 ` Paul E. McKenney 0 siblings, 0 replies; 20+ messages in thread From: Paul E. McKenney @ 2009-02-08 15:47 UTC (permalink / raw) To: Mathieu Desnoyers Cc: Trilok Soni, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel On Fri, Feb 06, 2009 at 01:37:01PM -0800, Paul E. McKenney wrote: > On Fri, Feb 06, 2009 at 03:03:29PM -0500, Mathieu Desnoyers wrote: > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: > > > On Thu, Feb 05, 2009 at 09:00:05PM -0500, Mathieu Desnoyers wrote: > > > > * Paul E. McKenney (paulmck@linux.vnet.ibm.com) wrote: [ . . . ] > > > > > CC arch/powerpc/kernel/asm-offsets.s > > > > > In file included from include/linux/module.h:18, > > > > > from include/linux/sysdev.h:25, > > > > > from include/linux/node.h:22, > > > > > from include/linux/swap.h:10, > > > > > from include/linux/suspend.h:7, > > > > > from arch/powerpc/kernel/asm-offsets.c:24: > > > > > include/linux/immediate.h:15:27: error: asm/immediate.h: No such file or directory > > > > > In file included from include/linux/module.h:18, > > > > > from include/linux/sysdev.h:25, > > > > > from include/linux/node.h:22, > > > > > from include/linux/swap.h:10, > > > > > from include/linux/suspend.h:7, > > > > > from arch/powerpc/kernel/asm-offsets.c:24: > > > > > include/linux/immediate.h:37: warning: ‘struct __imv’ declared > > > > > inside parameter list > > > > > include/linux/immediate.h:37: warning: its scope is only this definition > > > > > or declaration, which is probably not what you want > > > > > include/linux/immediate.h:40: warning: ‘struct __imv’ declared > > > > > inside parameter list > > > > > make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1 > > > > > make: *** [prepare0] Error 2 > > > > > 02/05/2009-17:57:41 Build the kernel. Failed rc = 2 > > > > > 02/05/2009-17:57:41 build: Building kernel... Failed rc = 1 > > > > > > > > > > > > > Hrm, does the file > > > > > > > > arch/powerpc/include/asm/immediate.h exist in your tree ? > > > > > > > > Here, with the setup done following the commands I gave you (minus the > > > > mkdir patch), I get : > > > > > > > > > > > > compudj@ok:~$ head testpaulmck/linux-2.6.29-rc3/arch/powerpc/include/asm/immediate.h > > > > #ifndef _ASM_POWERPC_IMMEDIATE_H > > > > #define _ASM_POWERPC_IMMEDIATE_H > > > > > > > > /* > > > > * Immediate values. PowerPC architecture optimizations. > > > > * > > > > * (C) Copyright 2006 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > > > > * > > > > * This file is released under the GPLv2. > > > > * See the file COPYING for more details. > > > > > > > > .... > > > > > > > > Which defines struct __imv. So hrm, normally the header should be there. > > > > (/me still confused) :) > > > > > > It does indeed, see the patch I generated against 2.6.29-rc3: > > > > > > http://www.rdrop.com/users/paulmck/patches/2.6.29-rc3-ltt-1.patch > > > > > > I get a similar failure on x86 -- perhaps my tools or build environment > > > does not match yours? > > > > > > > Maybe. If you want a quick and dirty solution, try : > > > > CONFIG_IMMEDIATE=n > > > > Immediate values are just an optimization, not necessary anyway. > > K -- kicking it off. One thing that helps on 32-bit x86 is removing the "select HAVE_IMMEDIATE" that you added to arch/x86/Kconfig. I then get assembly errors: AS arch/x86/kernel/entry_32.o arch/x86/kernel/entry_32.S: Assembler messages: arch/x86/kernel/entry_32.S:272: Error: invalid character '_' in mnemonic make[1]: *** [arch/x86/kernel/entry_32.o] Error 1 make: *** [arch/x86/kernel] Error 2 This seems to point to the following new line: INTERRUPT_RETURN_NMI_SAFE Replacing this with the NATIVE_INTERRUPT_RETURN_NMI_SAFE that appears elsewhere did not help. Over to you! Thanx, Paul -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [ltt-dev] LTTng 0.89 for Linux 2.6.29-rc3 2009-02-05 15:58 ` Paul E. McKenney 2009-02-05 16:22 ` Trilok Soni @ 2009-02-05 16:28 ` Trilok Soni 1 sibling, 0 replies; 20+ messages in thread From: Trilok Soni @ 2009-02-05 16:28 UTC (permalink / raw) To: paulmck Cc: Mathieu Desnoyers, ltt-dev, Ext4 Developers List, Theodore Ts'o, linux-kernel Hi Paul, On Thu, Feb 5, 2009 at 9:28 PM, Paul E. McKenney <paulmck@linux.vnet.ibm.com> wrote: >> >> Are you using quilt to apply the patchset series file in the right order ? > > Ummm... No. I never have used quilt. > > Ah, there is a series file. I guess it would not be too hard to make > an appropriate "sh" command: > How about trying? #quilt push -a -- ---Trilok Soni http://triloksoni.wordpress.com http://www.linkedin.com/in/triloksoni ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2009-02-08 15:47 UTC | newest] Thread overview: 20+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-01-30 20:07 LTTng 0.89 for Linux 2.6.29-rc3 Mathieu Desnoyers 2009-02-05 14:04 ` Paul E. McKenney 2009-02-05 15:02 ` Mathieu Desnoyers 2009-02-05 15:18 ` Paul E. McKenney 2009-02-05 15:38 ` [ltt-dev] " Mathieu Desnoyers 2009-02-05 15:58 ` Paul E. McKenney 2009-02-05 16:22 ` Trilok Soni 2009-02-05 18:01 ` Paul E. McKenney 2009-02-05 18:31 ` Mathieu Desnoyers 2009-02-05 18:44 ` Paul E. McKenney 2009-02-05 20:22 ` Mathieu Desnoyers 2009-02-05 21:04 ` Paul E. McKenney 2009-02-05 21:06 ` Mathieu Desnoyers 2009-02-06 0:33 ` Paul E. McKenney 2009-02-06 2:00 ` Mathieu Desnoyers 2009-02-06 13:48 ` Paul E. McKenney 2009-02-06 20:03 ` Mathieu Desnoyers 2009-02-06 21:37 ` Paul E. McKenney 2009-02-08 15:47 ` Paul E. McKenney 2009-02-05 16:28 ` Trilok Soni
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).