[patch 26/36] ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()

[Greg KH <gregkh@suse.de>]

[-- Attachment #1: ext4-fix-the-race-between-read_inode_bitmap-and-ext4_new_inode.patch --]
[-- Type: text/plain, Size: 7119 bytes --]


2.6.27-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

(cherry picked from commit 393418676a7602e1d7d3f6e560159c65c8cbd50e)

We need to make sure we update the inode bitmap and clear
EXT4_BG_INODE_UNINIT flag with sb_bgl_lock held, since
ext4_read_inode_bitmap() looks at EXT4_BG_INODE_UNINIT to decide
whether to initialize the inode bitmap each time it is called.
(introduced by commit c806e68f.)

ext4_read_inode_bitmap does:

spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group));
if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
	ext4_init_inode_bitmap(sb, bh, block_group, desc);

and ext4_new_inode does
if (!ext4_set_bit_atomic(sb_bgl_lock(sbi, group),
                   ino, inode_bitmap_bh->b_data))
		   ......
		   ...
spin_lock(sb_bgl_lock(sbi, group));

gdp->bg_flags &= cpu_to_le16(~EXT4_BG_INODE_UNINIT);
i.e., on allocation we update the bitmap then we take the sb_bgl_lock
and clear the EXT4_BG_INODE_UNINIT flag. What can happen is a
parallel ext4_read_inode_bitmap can zero out the bitmap in between
the above ext4_set_bit_atomic and spin_lock(sb_bg_lock..)

The race results in below user visible errors
EXT4-fs error (device sdb1): ext4_free_inode: bit already cleared for inode 168449
EXT4-fs warning (device sdb1): ext4_unlink: Deleting nonexistent file ...
EXT4-fs warning (device sdb1): ext4_rmdir: empty directory has too many links ...
ls: /mnt/tmp/f/p369/d3/d6/d39/db2/dee/d10f/d3f/l71: Stale NFS file handle

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 fs/ext4/ialloc.c |  140 ++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 83 insertions(+), 57 deletions(-)

--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -567,6 +567,77 @@ static int find_group_other(struct super
 }
 
 /*
+ * claim the inode from the inode bitmap. If the group
+ * is uninit we need to take the groups's sb_bgl_lock
+ * and clear the uninit flag. The inode bitmap update
+ * and group desc uninit flag clear should be done
+ * after holding sb_bgl_lock so that ext4_read_inode_bitmap
+ * doesn't race with the ext4_claim_inode
+ */
+static int ext4_claim_inode(struct super_block *sb,
+			struct buffer_head *inode_bitmap_bh,
+			unsigned long ino, ext4_group_t group, int mode)
+{
+	int free = 0, retval = 0;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	struct ext4_group_desc *gdp = ext4_get_group_desc(sb, group, NULL);
+
+	spin_lock(sb_bgl_lock(sbi, group));
+	if (ext4_set_bit(ino, inode_bitmap_bh->b_data)) {
+		/* not a free inode */
+		retval = 1;
+		goto err_ret;
+	}
+	ino++;
+	if ((group == 0 && ino < EXT4_FIRST_INO(sb)) ||
+			ino > EXT4_INODES_PER_GROUP(sb)) {
+		spin_unlock(sb_bgl_lock(sbi, group));
+		ext4_error(sb, __func__,
+			   "reserved inode or inode > inodes count - "
+			   "block_group = %lu, inode=%lu", group,
+			   ino + group * EXT4_INODES_PER_GROUP(sb));
+		return 1;
+	}
+	/* If we didn't allocate from within the initialized part of the inode
+	 * table then we need to initialize up to this inode. */
+	if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) {
+
+		if (gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
+			gdp->bg_flags &= cpu_to_le16(~EXT4_BG_INODE_UNINIT);
+			/* When marking the block group with
+			 * ~EXT4_BG_INODE_UNINIT we don't want to depend
+			 * on the value of bg_itable_unused even though
+			 * mke2fs could have initialized the same for us.
+			 * Instead we calculated the value below
+			 */
+
+			free = 0;
+		} else {
+			free = EXT4_INODES_PER_GROUP(sb) -
+				le16_to_cpu(gdp->bg_itable_unused);
+		}
+
+		/*
+		 * Check the relative inode number against the last used
+		 * relative inode number in this group. if it is greater
+		 * we need to  update the bg_itable_unused count
+		 *
+		 */
+		if (ino > free)
+			gdp->bg_itable_unused =
+				cpu_to_le16(EXT4_INODES_PER_GROUP(sb) - ino);
+	}
+	le16_add_cpu(&gdp->bg_free_inodes_count, -1);
+	if (S_ISDIR(mode)) {
+		le16_add_cpu(&gdp->bg_used_dirs_count, 1);
+	}
+	gdp->bg_checksum = ext4_group_desc_csum(sbi, group, gdp);
+err_ret:
+	spin_unlock(sb_bgl_lock(sbi, group));
+	return retval;
+}
+
+/*
  * There are two policies for allocating an inode.  If the new inode is
  * a directory, then a forward search is made for a block group with both
  * free space and a low directory-to-inode ratio; if that fails, then of
@@ -649,8 +720,12 @@ repeat_in_this_group:
 			if (err)
 				goto fail;
 
-			if (!ext4_set_bit_atomic(sb_bgl_lock(sbi, group),
-						ino, bitmap_bh->b_data)) {
+			BUFFER_TRACE(bh2, "get_write_access");
+			err = ext4_journal_get_write_access(handle, bh2);
+			if (err)
+				goto fail;
+			if (!ext4_claim_inode(sb, bitmap_bh,
+						ino, group, mode)) {
 				/* we won it */
 				BUFFER_TRACE(bitmap_bh,
 					"call ext4_journal_dirty_metadata");
@@ -658,10 +733,13 @@ repeat_in_this_group:
 								bitmap_bh);
 				if (err)
 					goto fail;
+				/* zero bit is inode number 1*/
+				ino++;
 				goto got;
 			}
 			/* we lost it */
 			jbd2_journal_release_buffer(handle, bitmap_bh);
+			jbd2_journal_release_buffer(handle, bh2);
 
 			if (++ino < EXT4_INODES_PER_GROUP(sb))
 				goto repeat_in_this_group;
@@ -681,21 +759,6 @@ repeat_in_this_group:
 	goto out;
 
 got:
-	ino++;
-	if ((group == 0 && ino < EXT4_FIRST_INO(sb)) ||
-	    ino > EXT4_INODES_PER_GROUP(sb)) {
-		ext4_error(sb, __func__,
-			   "reserved inode or inode > inodes count - "
-			   "block_group = %lu, inode=%lu", group,
-			   ino + group * EXT4_INODES_PER_GROUP(sb));
-		err = -EIO;
-		goto fail;
-	}
-
-	BUFFER_TRACE(bh2, "get_write_access");
-	err = ext4_journal_get_write_access(handle, bh2);
-	if (err) goto fail;
-
 	/* We may have to initialize the block bitmap if it isn't already */
 	if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_GDT_CSUM) &&
 	    gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
@@ -730,47 +793,10 @@ got:
 		if (err)
 			goto fail;
 	}
-
-	spin_lock(sb_bgl_lock(sbi, group));
-	/* If we didn't allocate from within the initialized part of the inode
-	 * table then we need to initialize up to this inode. */
-	if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) {
-		if (gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) {
-			gdp->bg_flags &= cpu_to_le16(~EXT4_BG_INODE_UNINIT);
-
-			/* When marking the block group with
-			 * ~EXT4_BG_INODE_UNINIT we don't want to depend
-			 * on the value of bg_itable_unused even though
-			 * mke2fs could have initialized the same for us.
-			 * Instead we calculated the value below
-			 */
-
-			free = 0;
-		} else {
-			free = EXT4_INODES_PER_GROUP(sb) -
-				le16_to_cpu(gdp->bg_itable_unused);
-		}
-
-		/*
-		 * Check the relative inode number against the last used
-		 * relative inode number in this group. if it is greater
-		 * we need to  update the bg_itable_unused count
-		 *
-		 */
-		if (ino > free)
-			gdp->bg_itable_unused =
-				cpu_to_le16(EXT4_INODES_PER_GROUP(sb) - ino);
-	}