linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zheng Liu <gnehzuil.liu@gmail.com>
To: "Lukáš Czerner" <lczerner@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>,
	linux-ext4@vger.kernel.org, Zheng Liu <wenqing.lz@taobao.com>,
	Dmitry Monakhov <dmonakhov@openvz.org>
Subject: Re: Dev branch regressions
Date: Thu, 7 Mar 2013 19:54:58 +0800	[thread overview]
Message-ID: <20130307115458.GA2800@gmail.com> (raw)
In-Reply-To: <alpine.LFD.2.00.1303070746040.24359@localhost>

On Thu, Mar 07, 2013 at 07:47:31AM +0100, Lukáš Czerner wrote:
> On Wed, 6 Mar 2013, Theodore Ts'o wrote:
> 
> > Date: Wed, 6 Mar 2013 17:58:18 -0500
> > From: Theodore Ts'o <tytso@mit.edu>
> > To: Zheng Liu <gnehzuil.liu@gmail.com>
> > Cc: linux-ext4@vger.kernel.org, Zheng Liu <wenqing.lz@taobao.com>,
> >     Dmitry Monakhov <dmonakhov@openvz.org>
> > Subject: Dev branch regressions
> > 
> > On Wed, Mar 06, 2013 at 10:17:10PM +0800, Zheng Liu wrote:
> > > 
> > > *Big Note*
> > > When I am testing this patch series, I found some regressions in dev branch.
> > > Here is a note.  These regressions could be hitted by running test case
> > > serveral times.  So If we just run xfstests one time, they could be missed.
> > > 
> > >  - xfstests #74 with data=journal
> > > 
> > >  - xfstests #247 with data=journal
> > > Some warning messages are printed by ext4_releasepage.  We hit
> > > WARN_ON(PageChecked(page)) in this function.  But the test case itself can
> > > pass.
> > > 
> > >  - xfstests #269 with dioread_nolock
> > > The system will hang
> > 
> > I'm going to guess that you were running this using your SSD test
> > setup?  I just ran:
> > 
> > kvm-xfstests -c data_journal 74,74,74,74,74,247,247,247,247,247
> > 
> > using my standard hdd setup, and didn't see any failures or warnings.
> > 
> > How frequently are you seeing these failures?  When I have a chance
> > I'll try running these tests with a tmpfs image and see if I have any
> > better luck reproducing the problem there.
> > 
> > I did manage to get a hang (preceded with a soft lockup for the
> > dioread_nolock with test 269).
> > 
> > >  - xfstests #83 with bigalloc
> > > Some threads could be blocked for 120s.
> > 
> > I've seen this test blocked for hours (but without managing to trigger
> > the 120s soft lockup warning), but I'm not entirely sure this was a
> > regression.  I believe I've seen a similar hang with 3.8.0-rc3 if I
> > recall correctly.  I had been hoping the changes with the extent
> > status tree would fix it, but apparently no such luck.  :-(
> 
> You're right this is not a regression the problem has always been
> there, however now with some bigalloc fixes it becomes more obvious.
> I have some patches to address this issue, though it's not ready
> yet.

Hi Ted, Lukas,

I take a close look at these problems, and I can confirm that they are
not regression because in 3.8 kernel they have been there.  Honestly
they are hard to be hitted because I need to run several times to
trigger them.  IMHO most users don't use this features (data=journal,
bigalloc, dioread_nolock).  So let us fix them one by one.  I will file
these bugs in mailing list to let folks know.

Regards,
                                                - Zheng
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2013-03-07 11:39 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-06 14:17 [PATCH v2 0/5] ext4: try to fix up es regressions Zheng Liu
2013-03-06 14:17 ` [PATCH v2 1/5] ext4: improve ext4_es_can_be_merged() to avoid a potential overflow Zheng Liu
2013-03-11  0:43   ` Theodore Ts'o
2013-03-11  6:03     ` Zheng Liu
2013-03-06 14:17 ` [PATCH v2 2/5] ext4: add self-testing infrastructure to do a sanity check Zheng Liu
2013-03-07 15:41   ` Dmitry Monakhov
2013-03-08 13:01     ` Zheng Liu
2013-03-11  1:01   ` Theodore Ts'o
2013-03-06 14:17 ` [PATCH v2 3/5] ext4: fix wrong m_len value after unwritten extent conversion Zheng Liu
2013-03-07 15:42   ` Dmitry Monakhov
2013-03-11  1:07   ` Theodore Ts'o
2013-03-11  5:47     ` Zheng Liu
2013-03-13  1:57       ` Theodore Ts'o
2013-03-13  2:14         ` Theodore Ts'o
2013-03-13  8:53           ` Zheng Liu
2013-03-06 14:17 ` [PATCH v2 4/5] ext4: update extent status tree after an extent is zeroed out Zheng Liu
2013-03-07 15:55   ` Dmitry Monakhov
2013-03-08 13:14     ` Zheng Liu
2013-03-06 14:17 ` [PATCH v2 5/5] ext4: fix wrong the number of the allocted blocks in ext4_split_extent Zheng Liu
2013-03-06 22:58 ` Dev branch regressions Theodore Ts'o
2013-03-07  2:40   ` Zheng Liu
2013-03-07  6:47   ` Lukáš Czerner
2013-03-07 11:54     ` Zheng Liu [this message]
2013-03-07 16:08 ` [PATCH v2 0/5] ext4: try to fix up es regressions Dmitry Monakhov
2013-03-08 13:18   ` Zheng Liu
2013-03-11  2:11 ` Theodore Ts'o
2013-03-11  6:23   ` Zheng Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130307115458.GA2800@gmail.com \
    --to=gnehzuil.liu@gmail.com \
    --cc=dmonakhov@openvz.org \
    --cc=lczerner@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=tytso@mit.edu \
    --cc=wenqing.lz@taobao.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).