From: Carlos Maiolino <cmaiolino@redhat.com>
To: Eric Sandeen <sandeen@redhat.com>
Cc: ext4 development <linux-ext4@vger.kernel.org>
Subject: Re: [PATCH] jbd2: prefix printks with JBD2: not JBD:
Date: Mon, 26 May 2014 12:28:46 -0300 [thread overview]
Message-ID: <20140526152845.GA23116@localhost.localdomain> (raw)
In-Reply-To: <536A652C.7080509@redhat.com>
I really thought we had already fixed it.
The patch looks good too, consider it
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Cheers o/
On Wed, May 07, 2014 at 11:54:04AM -0500, Eric Sandeen wrote:
> I was looking at some debugging logs from a test on ext4,
> and wondered why I saw messages from JBD: not JBD2:
>
> This is why! Probably worth changing for consistency.
>
> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
> ---
>
> diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
> index 5203264..de35b53 100644
> --- a/fs/jbd2/journal.c
> +++ b/fs/jbd2/journal.c
> @@ -1527,13 +1527,13 @@ static int journal_get_superblock(journal_t *journal)
> if (JBD2_HAS_COMPAT_FEATURE(journal, JBD2_FEATURE_COMPAT_CHECKSUM) &&
> JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2)) {
> /* Can't have checksum v1 and v2 on at the same time! */
> - printk(KERN_ERR "JBD: Can't enable checksumming v1 and v2 "
> + printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2 "
> "at the same time!\n");
> goto out;
> }
>
> if (!jbd2_verify_csum_type(journal, sb)) {
> - printk(KERN_ERR "JBD: Unknown checksum type\n");
> + printk(KERN_ERR "JBD2: Unknown checksum type\n");
> goto out;
> }
>
> @@ -1541,7 +1541,7 @@ static int journal_get_superblock(journal_t *journal)
> if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2)) {
> journal->j_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
> if (IS_ERR(journal->j_chksum_driver)) {
> - printk(KERN_ERR "JBD: Cannot load crc32c driver.\n");
> + printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n");
> err = PTR_ERR(journal->j_chksum_driver);
> journal->j_chksum_driver = NULL;
> goto out;
> @@ -1550,7 +1550,7 @@ static int journal_get_superblock(journal_t *journal)
>
> /* Check superblock checksum */
> if (!jbd2_superblock_csum_verify(journal, sb)) {
> - printk(KERN_ERR "JBD: journal checksum error\n");
> + printk(KERN_ERR "JBD2: journal checksum error\n");
> goto out;
> }
>
> @@ -1836,7 +1836,7 @@ int jbd2_journal_set_features (journal_t *journal, unsigned long compat,
> journal->j_chksum_driver = crypto_alloc_shash("crc32c",
> 0, 0);
> if (IS_ERR(journal->j_chksum_driver)) {
> - printk(KERN_ERR "JBD: Cannot load crc32c "
> + printk(KERN_ERR "JBD2: Cannot load crc32c "
> "driver.\n");
> journal->j_chksum_driver = NULL;
> return 0;
> diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
> index 3929c50..3b6bb19 100644
> --- a/fs/jbd2/recovery.c
> +++ b/fs/jbd2/recovery.c
> @@ -594,7 +594,7 @@ static int do_one_pass(journal_t *journal,
> be32_to_cpu(tmp->h_sequence))) {
> brelse(obh);
> success = -EIO;
> - printk(KERN_ERR "JBD: Invalid "
> + printk(KERN_ERR "JBD2: Invalid "
> "checksum recovering "
> "block %llu in log\n",
> blocknr);
> diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
> index 7aa9a32..68ebfe1 100644
> --- a/fs/jbd2/transaction.c
> +++ b/fs/jbd2/transaction.c
> @@ -1305,7 +1305,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)
> JBUFFER_TRACE(jh, "fastpath");
> if (unlikely(jh->b_transaction !=
> journal->j_running_transaction)) {
> - printk(KERN_EMERG "JBD: %s: "
> + printk(KERN_EMERG "JBD2: %s: "
> "jh->b_transaction (%llu, %p, %u) != "
> "journal->j_running_transaction (%p, %u)",
> journal->j_devname,
> @@ -1332,7 +1332,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)
> JBUFFER_TRACE(jh, "already on other transaction");
> if (unlikely(jh->b_transaction !=
> journal->j_committing_transaction)) {
> - printk(KERN_EMERG "JBD: %s: "
> + printk(KERN_EMERG "JBD2: %s: "
> "jh->b_transaction (%llu, %p, %u) != "
> "journal->j_committing_transaction (%p, %u)",
> journal->j_devname,
> @@ -1345,7 +1345,7 @@ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)
> ret = -EINVAL;
> }
> if (unlikely(jh->b_next_transaction != transaction)) {
> - printk(KERN_EMERG "JBD: %s: "
> + printk(KERN_EMERG "JBD2: %s: "
> "jh->b_next_transaction (%llu, %p, %u) != "
> "transaction (%p, %u)",
> journal->j_devname,
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Carlos
next prev parent reply other threads:[~2014-05-26 15:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-07 16:54 [PATCH] jbd2: prefix printks with JBD2: not JBD: Eric Sandeen
2014-05-12 0:17 ` Theodore Ts'o
2014-05-12 14:28 ` Eric Sandeen
2014-05-26 15:28 ` Carlos Maiolino [this message]
2014-05-26 15:53 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140526152845.GA23116@localhost.localdomain \
--to=cmaiolino@redhat.com \
--cc=linux-ext4@vger.kernel.org \
--cc=sandeen@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).