public inbox for linux-ext4@vger.kernel.org
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: "zhangyi (F)" <yi.zhang@huawei.com>
Cc: linux-ext4@vger.kernel.org, tytso@mit.edu, jack@suse.cz,
	adilger.kernel@dilger.ca, miaoxie@huawei.com
Subject: Re: [PATCH] ext4: brelse all indirect buffers in ext4_ind_remove_space()
Date: Wed, 13 Mar 2019 18:34:37 +0100	[thread overview]
Message-ID: <20190313173437.GL9108@quack2.suse.cz> (raw)
In-Reply-To: <1552137547-115352-1-git-send-email-yi.zhang@huawei.com>

On Sat 09-03-19 21:19:07, zhangyi (F) wrote:
> All indirect buffers get by ext4_find_shared() should be released no
> mater the branch should be freed or not. But now, we forget to release
> the lower depth indirect buffers when removing space from the same
> higher depth indirect block. It will lead to buffer leak and futher
> more, it may lead to quota information corruption when using old quota,
> consider the following case.
> 
>  - Create and mount an empty ext4 filesystem without extent and quota
>    features,
>  - quotacheck and enable the user & group quota,
>  - Create some files and write some data to them, and then punch hole
>    to some files of them, it may trigger the buffer leak problem
>    mentioned above.
>  - Disable quota and run quotacheck again, it will create two new
>    aquota files and write the checked quota information to them, which
>    probably may reuse the freed indirect block(the buffer and page
>    cache was not freed) as data block.
>  - Enable quota again, it will invoke
>    vfs_load_quota_inode()->invalidate_bdev() to try to clean unused
>    buffers and pagecache. Unfortunately, because of the buffer of quota
>    data block is still referenced, quota code cannot read the up to date
>    quota info from the device and lead to quota information corruption.
> 
> This problem can be reproduced by xfstests generic/231 on ext3 file
> system or ext4 filesystem without extent and quota feature.
> 
> This patch fix this problem by brelse all indirect buffers, and also
> do some cleanup of the brelse code in ext4_ind_remove_space().
> 
> Reported-by: Hulk Robot <hulkci@huawei.com>
> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>

Thanks for the report and the patch! I think it is correct but I'd find it
simpler (not only the patch as such but also the resulting code in the
function) to just fix that one place that seems to leak bh references.
Something like:

                if (partial > chain && partial2 > chain2 &&
                    partial->bh->b_blocknr == partial2->bh->b_blocknr) {
                        /*
                         * We've converged on the same block. Clear the range,
                         * then we're done.
                         */
                        ext4_free_branches(handle, inode, partial->bh,
                                           partial->p + 1,
                                           partial2->p,
                                           (chain+n-1) - partial);
-                       BUFFER_TRACE(partial->bh, "call brelse");
-                       brelse(partial->bh);
-                       BUFFER_TRACE(partial2->bh, "call brelse");
-                       brelse(partial2->bh);
+			while (partial > chain) {
+				BUFFER_TRACE(partial->bh, "call brelse");
+				brelse(partial->bh);
+			}
+			while (partial2 > chain2) {
+				BUFFER_TRACE(partial2->bh, "call brelse");
+				brelse(partial2->bh);
+			}
                        return 0;
                }

Or is there some other problem I miss?

								Honza
> ---
>  fs/ext4/indirect.c | 43 ++++++++++++++++++++++---------------------
>  1 file changed, 22 insertions(+), 21 deletions(-)
> 
> diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
> index bf7fa15..6f3f7d5 100644
> --- a/fs/ext4/indirect.c
> +++ b/fs/ext4/indirect.c
> @@ -1219,6 +1219,7 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  	ext4_lblk_t offsets[4], offsets2[4];
>  	Indirect chain[4], chain2[4];
>  	Indirect *partial, *partial2;
> +	Indirect *p = NULL, *p2 = NULL;
>  	ext4_lblk_t max_block;
>  	__le32 nr = 0, nr2 = 0;
>  	int n = 0, n2 = 0;
> @@ -1260,7 +1261,7 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  		}
>  
>  
> -		partial = ext4_find_shared(inode, n, offsets, chain, &nr);
> +		partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
>  		if (nr) {
>  			if (partial == chain) {
>  				/* Shared branch grows from the inode */
> @@ -1285,13 +1286,11 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  				partial->p + 1,
>  				(__le32 *)partial->bh->b_data+addr_per_block,
>  				(chain+n-1) - partial);
> -			BUFFER_TRACE(partial->bh, "call brelse");
> -			brelse(partial->bh);
>  			partial--;
>  		}
>  
>  end_range:
> -		partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
> +		partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
>  		if (nr2) {
>  			if (partial2 == chain2) {
>  				/*
> @@ -1321,16 +1320,14 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  					   (__le32 *)partial2->bh->b_data,
>  					   partial2->p,
>  					   (chain2+n2-1) - partial2);
> -			BUFFER_TRACE(partial2->bh, "call brelse");
> -			brelse(partial2->bh);
>  			partial2--;
>  		}
>  		goto do_indirects;
>  	}
>  
>  	/* Punch happened within the same level (n == n2) */
> -	partial = ext4_find_shared(inode, n, offsets, chain, &nr);
> -	partial2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
> +	partial = p = ext4_find_shared(inode, n, offsets, chain, &nr);
> +	partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2);
>  
>  	/* Free top, but only if partial2 isn't its subtree. */
>  	if (nr) {
> @@ -1387,11 +1384,7 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  					   partial->p + 1,
>  					   partial2->p,
>  					   (chain+n-1) - partial);
> -			BUFFER_TRACE(partial->bh, "call brelse");
> -			brelse(partial->bh);
> -			BUFFER_TRACE(partial2->bh, "call brelse");
> -			brelse(partial2->bh);
> -			return 0;
> +			goto clean_up;
>  		}
>  
>  		/*
> @@ -1406,8 +1399,6 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  					   partial->p + 1,
>  					   (__le32 *)partial->bh->b_data+addr_per_block,
>  					   (chain+n-1) - partial);
> -			BUFFER_TRACE(partial->bh, "call brelse");
> -			brelse(partial->bh);
>  			partial--;
>  		}
>  		if (partial2 > chain2 && depth2 <= depth) {
> @@ -1415,11 +1406,21 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  					   (__le32 *)partial2->bh->b_data,
>  					   partial2->p,
>  					   (chain2+n2-1) - partial2);
> -			BUFFER_TRACE(partial2->bh, "call brelse");
> -			brelse(partial2->bh);
>  			partial2--;
>  		}
>  	}
> +
> +clean_up:
> +	while (p && p > chain) {
> +		BUFFER_TRACE(p->bh, "call brelse");
> +		brelse(p->bh);
> +		p--;
> +	}
> +	while (p2 && p2 > chain2) {
> +		BUFFER_TRACE(p2->bh, "call brelse");
> +		brelse(p2->bh);
> +		p2--;
> +	}
>  	return 0;
>  
>  do_indirects:
> @@ -1427,7 +1428,7 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  	switch (offsets[0]) {
>  	default:
>  		if (++n >= n2)
> -			return 0;
> +			break;
>  		nr = i_data[EXT4_IND_BLOCK];
>  		if (nr) {
>  			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1);
> @@ -1435,7 +1436,7 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  		}
>  	case EXT4_IND_BLOCK:
>  		if (++n >= n2)
> -			return 0;
> +			break;
>  		nr = i_data[EXT4_DIND_BLOCK];
>  		if (nr) {
>  			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2);
> @@ -1443,7 +1444,7 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  		}
>  	case EXT4_DIND_BLOCK:
>  		if (++n >= n2)
> -			return 0;
> +			break;
>  		nr = i_data[EXT4_TIND_BLOCK];
>  		if (nr) {
>  			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3);
> @@ -1452,5 +1453,5 @@ int ext4_ind_remove_space(handle_t *handle, struct inode *inode,
>  	case EXT4_TIND_BLOCK:
>  		;
>  	}
> -	return 0;
> +	goto clean_up;
>  }
> -- 
> 2.7.4
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

  reply	other threads:[~2019-03-13 17:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-09 13:19 [PATCH] ext4: brelse all indirect buffers in ext4_ind_remove_space() zhangyi (F)
2019-03-13 17:34 ` Jan Kara [this message]
2019-03-14  2:19   ` zhangyi (F)
2019-03-14  9:54     ` Jan Kara
2019-03-14 13:04       ` zhangyi (F)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190313173437.GL9108@quack2.suse.cz \
    --to=jack@suse.cz \
    --cc=adilger.kernel@dilger.ca \
    --cc=linux-ext4@vger.kernel.org \
    --cc=miaoxie@huawei.com \
    --cc=tytso@mit.edu \
    --cc=yi.zhang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox