From: Zhang Yi <yi.zhang@huawei.com>
To: <linux-ext4@vger.kernel.org>
Cc: <tytso@mit.edu>, <adilger.kernel@dilger.ca>, <jack@suse.cz>,
<yi.zhang@huawei.com>, <yukuai3@huawei.com>
Subject: [PATCH v2 2/4] ext4: correct the error path of ext4_write_inline_data_end()
Date: Thu, 15 Jul 2021 09:54:50 +0800 [thread overview]
Message-ID: <20210715015452.2542505-3-yi.zhang@huawei.com> (raw)
In-Reply-To: <20210715015452.2542505-1-yi.zhang@huawei.com>
Current error path of ext4_write_inline_data_end() is not correct.
Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
fs/ext4/inline.c | 15 +++++----------
fs/ext4/inode.c | 7 +++++--
2 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 70cb64db33f7..28b666f25ac2 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -733,25 +733,20 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
void *kaddr;
struct ext4_iloc iloc;
- if (unlikely(copied < len)) {
- if (!PageUptodate(page)) {
- copied = 0;
- goto out;
- }
- }
+ if (unlikely(copied < len) && !PageUptodate(page))
+ return 0;
ret = ext4_get_inode_loc(inode, &iloc);
if (ret) {
ext4_std_error(inode->i_sb, ret);
- copied = 0;
- goto out;
+ return ret;
}
ext4_write_lock_xattr(inode, &no_expand);
BUG_ON(!ext4_has_inline_data(inode));
kaddr = kmap_atomic(page);
- ext4_write_inline_data(inode, &iloc, kaddr, pos, len);
+ ext4_write_inline_data(inode, &iloc, kaddr, pos, copied);
kunmap_atomic(kaddr);
SetPageUptodate(page);
/* clear page dirty so that writepages wouldn't work for us. */
@@ -760,7 +755,7 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
ext4_write_unlock_xattr(inode, &no_expand);
brelse(iloc.bh);
mark_inode_dirty(inode);
-out:
+
return copied;
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index dca8e3810443..5bbf9f3b8b6f 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1295,6 +1295,7 @@ static int ext4_write_end(struct file *file,
goto errout;
}
copied = ret;
+ ret = 0;
} else
copied = block_write_end(file, mapping, pos,
len, copied, page, fsdata);
@@ -1321,13 +1322,14 @@ static int ext4_write_end(struct file *file,
if (i_size_changed || inline_data)
ret = ext4_mark_inode_dirty(handle, inode);
+errout:
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
*/
ext4_orphan_add(handle, inode);
-errout:
+
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
@@ -1410,6 +1412,7 @@ static int ext4_journalled_write_end(struct file *file,
goto errout;
}
copied = ret;
+ ret = 0;
} else if (unlikely(copied < len) && !PageUptodate(page)) {
copied = 0;
ext4_journalled_zero_new_buffers(handle, page, from, to);
@@ -1439,6 +1442,7 @@ static int ext4_journalled_write_end(struct file *file,
ret = ret2;
}
+errout:
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
@@ -1446,7 +1450,6 @@ static int ext4_journalled_write_end(struct file *file,
*/
ext4_orphan_add(handle, inode);
-errout:
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
--
2.31.1
next prev parent reply other threads:[~2021-07-15 1:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-15 1:54 [PATCH v2 0/4] ext4: improve delalloc buffer write performance Zhang Yi
2021-07-15 1:54 ` [PATCH v2 1/4] ext4: check and update i_disksize properly Zhang Yi
2021-07-15 11:52 ` Jan Kara
2021-07-15 1:54 ` Zhang Yi [this message]
2021-07-15 1:54 ` [PATCH v2 3/4] ext4: factor out write end code of inline file Zhang Yi
2021-07-15 12:08 ` Jan Kara
2021-07-16 3:56 ` Zhang Yi
2021-07-16 10:08 ` Jan Kara
2021-07-16 12:04 ` Zhang Yi
2021-07-15 1:54 ` [PATCH v2 4/4] ext4: drop unnecessary journal handle in delalloc write Zhang Yi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210715015452.2542505-3-yi.zhang@huawei.com \
--to=yi.zhang@huawei.com \
--cc=adilger.kernel@dilger.ca \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=tytso@mit.edu \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).