From: Ye Bin <yebin10@huawei.com>
To: <tytso@mit.edu>, <adilger.kernel@dilger.ca>,
<linux-ext4@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <jack@suse.cz>,
Ye Bin <yebin10@huawei.com>
Subject: [PATCH -next v2] ext4: fix bug_on in ext4_writepages
Date: Tue, 10 May 2022 18:02:28 +0800 [thread overview]
Message-ID: <20220510100228.1172227-1-yebin10@huawei.com> (raw)
we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000
RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002
RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000
R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001
R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028
FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_writepages+0x130/0x3a0
filemap_fdatawrite_wbc+0x83/0xa0
filemap_flush+0xab/0xe0
ext4_alloc_da_blocks+0x51/0x120
__ext4_ioctl+0x1534/0x3210
__x64_sys_ioctl+0x12c/0x170
do_syscall_64+0x3b/0x90
It may happen as follows:
1. write inline_data inode
vfs_write
new_sync_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin -> If inline data size too
small will allocate block to write, then mapping will has
dirty page
ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
ioctl_preallocate
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_map_blocks -> fail will goto restore data
ext4_restore_inline_data
ext4_create_inline_data
ext4_write_inline_data
ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
ext4_alloc_da_blocks
filemap_flush
filemap_fdatawrite_wbc
do_writepages
ext4_writepages
if (ext4_has_inline_data(inode))
BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
The root cause of this issue is we destory inline data until call ext4_writepages
under delay allocation mode. But there maybe already covert from inline to extent.
To solved this issue, we call filemap_flush firstly.
Signed-off-by: Ye Bin <yebin10@huawei.com>
---
fs/ext4/inline.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 6d253edebf9f..130ed5d83734 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -2002,6 +2002,14 @@ int ext4_convert_inline_data(struct inode *inode)
if (!ext4_has_inline_data(inode)) {
ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
return 0;
+ } else if (test_opt(inode->i_sb, DELALLOC) && !S_ISDIR(inode->i_mode)) {
+ error = filemap_flush(inode->i_mapping);
+ if (error)
+ return error;
+ if (!ext4_has_inline_data(inode)) {
+ ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA);
+ return 0;
+ }
}
needed_blocks = ext4_writepage_trans_blocks(inode);
--
2.31.1
next reply other threads:[~2022-05-10 9:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-10 10:02 Ye Bin [this message]
2022-05-11 13:47 ` [PATCH -next v2] ext4: fix bug_on in ext4_writepages Jan Kara
2022-05-14 9:28 ` yebin
2022-05-16 1:09 ` yebin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220510100228.1172227-1-yebin10@huawei.com \
--to=yebin10@huawei.com \
--cc=adilger.kernel@dilger.ca \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).