From: Lukas Czerner <lczerner@redhat.com>
To: Tadeusz Struk <tadeusz.struk@linaro.org>
Cc: Theodore Ts'o <tytso@mit.edu>,
Andreas Dilger <adilger.kernel@dilger.ca>,
linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org,
syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
Subject: Re: [PATCH] ext4: fix kernel BUG in ext4_free_blocks
Date: Thu, 14 Jul 2022 14:23:51 +0200 [thread overview]
Message-ID: <20220714122351.vtiai34zvrrg2np2@fedora> (raw)
In-Reply-To: <20220714095300.ffij7re6l5n6ixlg@fedora>
On Thu, Jul 14, 2022 at 11:53:00AM +0200, Lukas Czerner wrote:
> On Wed, Jul 13, 2022 at 11:59:04AM -0700, Tadeusz Struk wrote:
> > Syzbot reported a BUG in ext4_free_blocks.
> > The issue is triggered from ext4_mb_clear_bb(). What happens is the
> > block number passed to ext4_get_group_no_and_offset() is 0 and the
> > es->s_first_data_block is 1. This makes block group number returned
> > from ext4_get_group_no_and_offset equal to -1. This is then passed to
> > ext4_get_group_info() and hits a BUG:
> > BUG_ON(group >= EXT4_SB(sb)->s_groups_count),
> > what can be seen in the trace below.
> > This patch adds an assertion to ext4_get_group_no_and_offset() that
> > checks if block number is not smaller than es->s_first_data_block.
> >
> > kernel BUG at fs/ext4/ext4.h:3319!
> > invalid opcode: 0000 [#1] PREEMPT SMP KASAN
> > CPU: 0 PID: 337 Comm: repro Not tainted 5.19.0-rc6-00105-g4e8e898e4107-dirty #14
> > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
> > RIP: 0010:ext4_mb_clear_bb+0x1bd6/0x1be0
> > Call Trace:
> > <TASK>
> > ext4_free_blocks+0x9b3/0xc90
> > ext4_clear_blocks+0x344/0x3b0
> > ext4_ind_truncate+0x967/0x1050
> > ext4_truncate+0xb1b/0x1210
> > ext4_evict_inode+0xf06/0x16f0
> > evict+0x2a3/0x630
> > iput+0x618/0x850
> > ext4_enable_quotas+0x578/0x920
> > ext4_orphan_cleanup+0x539/0x1200
> > ext4_fill_super+0x94d8/0x9bc0
> > get_tree_bdev+0x40c/0x630
> > ext4_get_tree+0x1c/0x20
> > vfs_get_tree+0x88/0x290
> > do_new_mount+0x289/0xac0
> > path_mount+0x607/0xfd0
> > __se_sys_mount+0x2c4/0x3b0
> > __x64_sys_mount+0xbf/0xd0
> > do_syscall_64+0x3d/0x90
> > entry_SYSCALL_64_after_hwframe+0x63/0xcd
> > </TASK>
> >
> > Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c
> > Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com
> > Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
> > ---
> > fs/ext4/balloc.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
> > index 78ee3ef795ae..1175750ad05f 100644
> > --- a/fs/ext4/balloc.c
> > +++ b/fs/ext4/balloc.c
> > @@ -56,6 +56,9 @@ void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr,
> > struct ext4_super_block *es = EXT4_SB(sb)->s_es;
> > ext4_grpblk_t offset;
> >
> > + if (blocknr < le32_to_cpu(es->s_first_data_block))
> > + blocknr = le32_to_cpu(es->s_first_data_block);
> > +
>
> This does not seem right. we should never work with block number smaller
> than s_first_data_block. The first 1024 bytes of the file system are
> unused and in case we have 1k block size, the entire first block is
> unused.
>
> I guess the image we work here with is corrupted, from the log it seems
> that it was noticed correctly so the question is why did we still ended
> up calling ext4_free_blocks() ? Seems like this should have been stopped
> earlier by ext4_clear_blocks() ?
>
> I did notice that in ext4_mb_clear_bb() we call
> ext4_get_group_no_and_offset() before ext4_inode_block_valid() but
> again we should have caught this problem earlier.
>
> Can you link me the file system image that generated this problem?
ok, I got the syzkaller C repro to work. The problem is that it's
bigalloc file system and the 'block' and 'count' to free in
ext4_free_blocks will get adjusted after the ext4_inode_block_valid().
We should make sure that if this happens we also clear the
EXT4_FREE_BLOCKS_VALIDATED. Additonally the ext4_inode_block_valid()
in ext4_mb_clear_bb() should be called *before* the values are taken for
granted. I'll prepare a patch to fix this.
-Lukas
>
> Thanks!
> -Lukas
>
>
> > blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
> > offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
> > EXT4_SB(sb)->s_cluster_bits;
> > --
> > 2.36.1
> >
>
next prev parent reply other threads:[~2022-07-14 12:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 18:59 [PATCH] ext4: fix kernel BUG in ext4_free_blocks Tadeusz Struk
2022-07-14 9:53 ` Lukas Czerner
2022-07-14 12:23 ` Lukas Czerner [this message]
2022-07-14 13:52 ` Tadeusz Struk
2022-07-14 16:59 ` [PATCH] ext4: block range must be validated before use in ext4_mb_clear_bb() Lukas Czerner
2022-07-14 17:40 ` Tadeusz Struk
2022-07-22 13:58 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220714122351.vtiai34zvrrg2np2@fedora \
--to=lczerner@redhat.com \
--cc=adilger.kernel@dilger.ca \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com \
--cc=tadeusz.struk@linaro.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox