Linux EXT4 FS development
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Jan Kara <jack@suse.cz>,
	tytso@mit.edu, jack@suse.com, linux-ext4@vger.kernel.org,
	linux-kernel@vger.kernel.org, yi.zhang@huawei.com,
	libaokun1@huawei.com, zhanchengbin1@huawei.com
Subject: Re: [PATCH v2] jbd2: Fix data missing when reusing bh which is ready to be checkpointed
Date: Mon, 9 Jan 2023 12:20:32 +0100	[thread overview]
Message-ID: <20230109112032.z4xratnwhyri74xj@quack3> (raw)
In-Reply-To: <09622c2f-6cf7-79c9-2624-c0c0835d125d@huawei.com>

On Sat 07-01-23 17:16:10, Zhihao Cheng wrote:
> 在 2023/1/6 22:22, Jan Kara 写道:
> 
> Hi Jan, thanks for reviewing.Some discussions below:
> 
> 
> > > diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
> > > index 6a404ac1c178..06a5e7961ef2 100644
> > > --- a/fs/jbd2/transaction.c
> > > +++ b/fs/jbd2/transaction.c
> > > @@ -1010,36 +1010,37 @@ do_get_write_access(handle_t *handle, struct journal_head *jh,
> > >   	 * ie. locked but not dirty) or tune2fs (which may actually have
> > >   	 * the buffer dirtied, ugh.)  */
> > > -	if (buffer_dirty(bh)) {
> > > +	if (buffer_dirty(bh) && jh->b_transaction) {
> > >   		/*
> > >   		 * First question: is this buffer already part of the current
> > >   		 * transaction or the existing committing transaction?
> > >   		 */
> > > -		if (jh->b_transaction) {
> > > -			J_ASSERT_JH(jh,
> > > -				jh->b_transaction == transaction ||
> > > -				jh->b_transaction ==
> > > -					journal->j_committing_transaction);
> > > -			if (jh->b_next_transaction)
> > > -				J_ASSERT_JH(jh, jh->b_next_transaction ==
> > > -							transaction);
> > > -			warn_dirty_buffer(bh);
> > > -		}
> > > +		J_ASSERT_JH(jh, jh->b_transaction == transaction ||
> > > +			jh->b_transaction == journal->j_committing_transaction);
> > > +		if (jh->b_next_transaction)
> > > +			J_ASSERT_JH(jh, jh->b_next_transaction == transaction);
> > > +		warn_dirty_buffer(bh);
> > >   		/*
> > > -		 * In any case we need to clean the dirty flag and we must
> > > -		 * do it under the buffer lock to be sure we don't race
> > > -		 * with running write-out.
> > > +		 * We need to clean the dirty flag and we must do it under the
> > > +		 * buffer lock to be sure we don't race with running write-out.
> > >   		 */
> > >   		JBUFFER_TRACE(jh, "Journalling dirty buffer");
> > >   		clear_buffer_dirty(bh);
> > > +		/*
> > > +		 * Setting jbddirty after clearing buffer dirty is necessary.
> > > +		 * Function jbd2_journal_restart() could keep buffer on
> > > +		 * BJ_Reserved list until the transaction committing, then the
> > > +		 * buffer won't be dirtied by jbd2_journal_refile_buffer()
> > > +		 * after committing, the buffer couldn't fall on disk even
> > > +		 * last checkpoint finished, which may corrupt filesystem.
> > > +		 */
> > >   		set_buffer_jbddirty(bh);
> > >   	}
> > 
> > So I think the sequence:
> > 
> > 	if (buffer_dirty(bh)) {
> > 		warn_dirty_buffer(bh);
> > 		JBUFFER_TRACE(jh, "Journalling dirty buffer");
> > 		clear_buffer_dirty(bh);
> > 		set_buffer_jbddirty(bh);
> > 	}
> > 
> > can be moved into the branch
> > 
> >    	if (jh->b_transaction == transaction ||
> > 	    jh->b_next_transaction == transaction) {
> > 
> > below. That way you can drop the assertions as well because they happen
> > later in do_get_write_access() again anyway.
> 
> 1. If we move the squence:
>  	if (buffer_dirty(bh)) {
>  		warn_dirty_buffer(bh);
>  		JBUFFER_TRACE(jh, "Journalling dirty buffer");
>  		clear_buffer_dirty(bh);
>  		set_buffer_jbddirty(bh);
>  	}
> 
> into the branch
> 
>         if (jh->b_transaction == transaction ||
>  	    jh->b_next_transaction == transaction) {
> 
> , then we have a new situation(jh->b_transaction ==
> journal->j_committing_transaction) to clear buffer dirty, so we need to add
> an else-branch like(based on v2 patch):
> --- a/fs/jbd2/transaction.c
> +++ b/fs/jbd2/transaction.c
> @@ -1092,6 +1092,10 @@ do_get_write_access(handle_t *handle, struct
> journal_head *jh,
>                 spin_unlock(&journal->j_list_lock);
>                 unlock_buffer(bh);
>                 goto done;
> +       } else if (test_clear_buffer_dirty(bh)) {
> +               warn_dirty_buffer(bh);
> +               JBUFFER_TRACE(jh, "Journalling dirty buffer");
> +               set_buffer_jbddirty(bh);
>         }
>         unlock_buffer(bh);
> 
> I think we'd better not to move the sequence?

Oh, you're right. So yeah, keep this sequence where it was.

> 2. I agree that the assertions in branch 'if (jh->b_transaction)' are
> redundant, I will remove them in v3. Thanks for pointing that.

OK, thanks!

								Honza
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

      reply	other threads:[~2023-01-09 11:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-06 11:56 [PATCH v2] jbd2: Fix data missing when reusing bh which is ready to be checkpointed Zhihao Cheng
2023-01-06 14:22 ` Jan Kara
2023-01-07  9:16   ` Zhihao Cheng
2023-01-09 11:20     ` Jan Kara [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230109112032.z4xratnwhyri74xj@quack3 \
    --to=jack@suse.cz \
    --cc=chengzhihao1@huawei.com \
    --cc=jack@suse.com \
    --cc=libaokun1@huawei.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    --cc=yi.zhang@huawei.com \
    --cc=zhanchengbin1@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox