From: Jan Kara <jack@suse.cz>
To: Christian Brauner <brauner@kernel.org>
Cc: <linux-fsdevel@vger.kernel.org>, <linux-block@vger.kernel.org>,
Christoph Hellwig <hch@infradead.org>, Jan Kara <jack@suse.cz>,
linux-ext4@vger.kernel.org, Ted Tso <tytso@mit.edu>,
Christoph Hellwig <hch@lst.de>
Subject: [PATCH 22/29] ext4: Convert to bdev_open_by_dev()
Date: Wed, 27 Sep 2023 11:34:28 +0200 [thread overview]
Message-ID: <20230927093442.25915-22-jack@suse.cz> (raw)
In-Reply-To: <20230818123232.2269-1-jack@suse.cz>
Convert ext4 to use bdev_open_by_dev() and pass the handle around.
CC: <linux-ext4@vger.kernel.org>
CC: Ted Tso <tytso@mit.edu>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/ext4/ext4.h | 2 +-
fs/ext4/fsmap.c | 9 +++++----
fs/ext4/super.c | 52 +++++++++++++++++++++++++------------------------
3 files changed, 33 insertions(+), 30 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 9418359b1d9d..2b3218b49bca 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1537,7 +1537,7 @@ struct ext4_sb_info {
unsigned long s_commit_interval;
u32 s_max_batch_time;
u32 s_min_batch_time;
- struct block_device *s_journal_bdev;
+ struct bdev_handle *s_journal_bdev_handle;
#ifdef CONFIG_QUOTA
/* Names of quota files with journalled quota */
char __rcu *s_qf_names[EXT4_MAXQUOTAS];
diff --git a/fs/ext4/fsmap.c b/fs/ext4/fsmap.c
index cdf9bfe10137..11e6f33677a2 100644
--- a/fs/ext4/fsmap.c
+++ b/fs/ext4/fsmap.c
@@ -576,8 +576,9 @@ static bool ext4_getfsmap_is_valid_device(struct super_block *sb,
if (fm->fmr_device == 0 || fm->fmr_device == UINT_MAX ||
fm->fmr_device == new_encode_dev(sb->s_bdev->bd_dev))
return true;
- if (EXT4_SB(sb)->s_journal_bdev &&
- fm->fmr_device == new_encode_dev(EXT4_SB(sb)->s_journal_bdev->bd_dev))
+ if (EXT4_SB(sb)->s_journal_bdev_handle &&
+ fm->fmr_device ==
+ new_encode_dev(EXT4_SB(sb)->s_journal_bdev_handle->bdev->bd_dev))
return true;
return false;
}
@@ -647,9 +648,9 @@ int ext4_getfsmap(struct super_block *sb, struct ext4_fsmap_head *head,
memset(handlers, 0, sizeof(handlers));
handlers[0].gfd_dev = new_encode_dev(sb->s_bdev->bd_dev);
handlers[0].gfd_fn = ext4_getfsmap_datadev;
- if (EXT4_SB(sb)->s_journal_bdev) {
+ if (EXT4_SB(sb)->s_journal_bdev_handle) {
handlers[1].gfd_dev = new_encode_dev(
- EXT4_SB(sb)->s_journal_bdev->bd_dev);
+ EXT4_SB(sb)->s_journal_bdev_handle->bdev->bd_dev);
handlers[1].gfd_fn = ext4_getfsmap_logdev;
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index dbebd8b3127e..d43f8324242a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1351,14 +1351,14 @@ static void ext4_put_super(struct super_block *sb)
sync_blockdev(sb->s_bdev);
invalidate_bdev(sb->s_bdev);
- if (sbi->s_journal_bdev) {
+ if (sbi->s_journal_bdev_handle) {
/*
* Invalidate the journal device's buffers. We don't want them
* floating about in memory - the physical journal device may
* hotswapped, and it breaks the `ro-after' testing code.
*/
- sync_blockdev(sbi->s_journal_bdev);
- invalidate_bdev(sbi->s_journal_bdev);
+ sync_blockdev(sbi->s_journal_bdev_handle->bdev);
+ invalidate_bdev(sbi->s_journal_bdev_handle->bdev);
}
ext4_xattr_destroy_cache(sbi->s_ea_inode_cache);
@@ -4233,7 +4233,7 @@ int ext4_calculate_overhead(struct super_block *sb)
* Add the internal journal blocks whether the journal has been
* loaded or not
*/
- if (sbi->s_journal && !sbi->s_journal_bdev)
+ if (sbi->s_journal && !sbi->s_journal_bdev_handle)
overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_total_len);
else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
/* j_inum for internal journal is non-zero */
@@ -5670,9 +5670,9 @@ failed_mount9: __maybe_unused
#endif
fscrypt_free_dummy_policy(&sbi->s_dummy_enc_policy);
brelse(sbi->s_sbh);
- if (sbi->s_journal_bdev) {
- invalidate_bdev(sbi->s_journal_bdev);
- blkdev_put(sbi->s_journal_bdev, sb);
+ if (sbi->s_journal_bdev_handle) {
+ invalidate_bdev(sbi->s_journal_bdev_handle->bdev);
+ bdev_release(sbi->s_journal_bdev_handle);
}
out_fail:
invalidate_bdev(sb->s_bdev);
@@ -5842,12 +5842,13 @@ static journal_t *ext4_open_inode_journal(struct super_block *sb,
return journal;
}
-static struct block_device *ext4_get_journal_blkdev(struct super_block *sb,
+static struct bdev_handle *ext4_get_journal_blkdev(struct super_block *sb,
dev_t j_dev, ext4_fsblk_t *j_start,
ext4_fsblk_t *j_len)
{
struct buffer_head *bh;
struct block_device *bdev;
+ struct bdev_handle *bdev_handle;
int hblock, blocksize;
ext4_fsblk_t sb_block;
unsigned long offset;
@@ -5856,16 +5857,17 @@ static struct block_device *ext4_get_journal_blkdev(struct super_block *sb,
/* see get_tree_bdev why this is needed and safe */
up_write(&sb->s_umount);
- bdev = blkdev_get_by_dev(j_dev, BLK_OPEN_READ | BLK_OPEN_WRITE, sb,
- &fs_holder_ops);
+ bdev_handle = bdev_open_by_dev(j_dev, BLK_OPEN_READ | BLK_OPEN_WRITE,
+ sb, &fs_holder_ops);
down_write(&sb->s_umount);
- if (IS_ERR(bdev)) {
+ if (IS_ERR(bdev_handle)) {
ext4_msg(sb, KERN_ERR,
"failed to open journal device unknown-block(%u,%u) %ld",
- MAJOR(j_dev), MINOR(j_dev), PTR_ERR(bdev));
- return ERR_CAST(bdev);
+ MAJOR(j_dev), MINOR(j_dev), PTR_ERR(bdev_handle));
+ return bdev_handle;
}
+ bdev = bdev_handle->bdev;
blocksize = sb->s_blocksize;
hblock = bdev_logical_block_size(bdev);
if (blocksize < hblock) {
@@ -5912,12 +5914,12 @@ static struct block_device *ext4_get_journal_blkdev(struct super_block *sb,
*j_start = sb_block + 1;
*j_len = ext4_blocks_count(es);
brelse(bh);
- return bdev;
+ return bdev_handle;
out_bh:
brelse(bh);
out_bdev:
- blkdev_put(bdev, sb);
+ bdev_release(bdev_handle);
return ERR_PTR(errno);
}
@@ -5927,14 +5929,14 @@ static journal_t *ext4_open_dev_journal(struct super_block *sb,
journal_t *journal;
ext4_fsblk_t j_start;
ext4_fsblk_t j_len;
- struct block_device *journal_bdev;
+ struct bdev_handle *bdev_handle;
int errno = 0;
- journal_bdev = ext4_get_journal_blkdev(sb, j_dev, &j_start, &j_len);
- if (IS_ERR(journal_bdev))
- return ERR_CAST(journal_bdev);
+ bdev_handle = ext4_get_journal_blkdev(sb, j_dev, &j_start, &j_len);
+ if (IS_ERR(bdev_handle))
+ return ERR_CAST(bdev_handle);
- journal = jbd2_journal_init_dev(journal_bdev, sb->s_bdev, j_start,
+ journal = jbd2_journal_init_dev(bdev_handle->bdev, sb->s_bdev, j_start,
j_len, sb->s_blocksize);
if (IS_ERR(journal)) {
ext4_msg(sb, KERN_ERR, "failed to create device journal");
@@ -5949,14 +5951,14 @@ static journal_t *ext4_open_dev_journal(struct super_block *sb,
goto out_journal;
}
journal->j_private = sb;
- EXT4_SB(sb)->s_journal_bdev = journal_bdev;
+ EXT4_SB(sb)->s_journal_bdev_handle = bdev_handle;
ext4_init_journal_params(sb, journal);
return journal;
out_journal:
jbd2_journal_destroy(journal);
out_bdev:
- blkdev_put(journal_bdev, sb);
+ bdev_release(bdev_handle);
return ERR_PTR(errno);
}
@@ -7300,12 +7302,12 @@ static inline int ext3_feature_set_ok(struct super_block *sb)
static void ext4_kill_sb(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
- struct block_device *journal_bdev = sbi ? sbi->s_journal_bdev : NULL;
+ struct bdev_handle *handle = sbi ? sbi->s_journal_bdev_handle : NULL;
kill_block_super(sb);
- if (journal_bdev)
- blkdev_put(journal_bdev, sb);
+ if (handle)
+ bdev_release(handle);
}
static struct file_system_type ext4_fs_type = {
--
2.35.3
next prev parent reply other threads:[~2023-09-27 9:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-23 10:48 [PATCH v3 0/29] block: Make blkdev_get_by_*() return handle Jan Kara
2023-08-23 10:48 ` [PATCH 22/29] ext4: Convert to bdev_open_by_dev() Jan Kara
2023-08-25 12:29 ` Christian Brauner
2023-08-25 13:32 ` [PATCH v3 0/29] block: Make blkdev_get_by_*() return handle Christian Brauner
2023-08-28 17:07 ` Jan Kara
2023-08-29 11:02 ` Christian Brauner
2023-09-27 9:34 ` [PATCH v4 " Jan Kara
2023-09-27 9:34 ` Jan Kara [this message]
2023-09-27 14:19 ` Jens Axboe
2023-09-27 16:21 ` Christian Brauner
2023-10-02 7:57 ` Jan Kara
-- strict thread matches above, loose matches on Subject: below --
2023-08-11 11:04 [PATCH v2 " Jan Kara
2023-08-11 11:04 ` [PATCH 22/29] ext4: Convert to bdev_open_by_dev() Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927093442.25915-22-jack@suse.cz \
--to=jack@suse.cz \
--cc=brauner@kernel.org \
--cc=hch@infradead.org \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).