From: Jan Kara <jack@suse.cz>
To: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Jan Kara <jack@suse.com>,
linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
"Fabio M . De Francesco" <fmdefrancesco@gmail.com>
Subject: Re: [PATCH 02/10] ext2: Convert ext2_check_page to ext2_check_folio
Date: Tue, 3 Oct 2023 12:40:17 +0200 [thread overview]
Message-ID: <20231003104017.ohuyl3fv2mobif5u@quack3> (raw)
In-Reply-To: <20230921200746.3303942-2-willy@infradead.org>
On Thu 21-09-23 21:07:39, Matthew Wilcox (Oracle) wrote:
> Support in this function for large folios is limited to supporting
> filesystems with block size > PAGE_SIZE. This new functionality will only
> be supported on machines without HIGHMEM, so the problem of kmap_local
> only being able to map a single page in the folio can be ignored.
> We will not use large folios for ext2 directories on HIGHMEM machines.
OK, but can we perhaps enforce this with some checks & error messages
instead of a silent failure? Like:
#ifdef CONFIG_HIGHMEM
if (sb->s_blocksize > PAGE_SIZE)
bail with error
#endif
somewhere in ext2_fill_super()? Or maybe force allocation of lowmem pages
when blocksize > PAGE_SIZE?
Honza
>
> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
> ---
> fs/ext2/dir.c | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
> index b335f17f682f..03867381eec2 100644
> --- a/fs/ext2/dir.c
> +++ b/fs/ext2/dir.c
> @@ -96,19 +96,19 @@ static void ext2_commit_chunk(struct page *page, loff_t pos, unsigned len)
> unlock_page(page);
> }
>
> -static bool ext2_check_page(struct page *page, int quiet, char *kaddr)
> +static bool ext2_check_folio(struct folio *folio, int quiet, char *kaddr)
> {
> - struct inode *dir = page->mapping->host;
> + struct inode *dir = folio->mapping->host;
> struct super_block *sb = dir->i_sb;
> unsigned chunk_size = ext2_chunk_size(dir);
> u32 max_inumber = le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count);
> unsigned offs, rec_len;
> - unsigned limit = PAGE_SIZE;
> + unsigned limit = folio_size(folio);
> ext2_dirent *p;
> char *error;
>
> - if ((dir->i_size >> PAGE_SHIFT) == page->index) {
> - limit = dir->i_size & ~PAGE_MASK;
> + if (dir->i_size < folio_pos(folio) + limit) {
> + limit = offset_in_folio(folio, dir->i_size);
> if (limit & (chunk_size - 1))
> goto Ebadsize;
> if (!limit)
> @@ -132,7 +132,7 @@ static bool ext2_check_page(struct page *page, int quiet, char *kaddr)
> if (offs != limit)
> goto Eend;
> out:
> - SetPageChecked(page);
> + folio_set_checked(folio);
> return true;
>
> /* Too bad, we had an error */
> @@ -160,22 +160,22 @@ static bool ext2_check_page(struct page *page, int quiet, char *kaddr)
> bad_entry:
> if (!quiet)
> ext2_error(sb, __func__, "bad entry in directory #%lu: : %s - "
> - "offset=%lu, inode=%lu, rec_len=%d, name_len=%d",
> - dir->i_ino, error, (page->index<<PAGE_SHIFT)+offs,
> + "offset=%llu, inode=%lu, rec_len=%d, name_len=%d",
> + dir->i_ino, error, folio_pos(folio) + offs,
> (unsigned long) le32_to_cpu(p->inode),
> rec_len, p->name_len);
> goto fail;
> Eend:
> if (!quiet) {
> p = (ext2_dirent *)(kaddr + offs);
> - ext2_error(sb, "ext2_check_page",
> + ext2_error(sb, "ext2_check_folio",
> "entry in directory #%lu spans the page boundary"
> - "offset=%lu, inode=%lu",
> - dir->i_ino, (page->index<<PAGE_SHIFT)+offs,
> + "offset=%llu, inode=%lu",
> + dir->i_ino, folio_pos(folio) + offs,
> (unsigned long) le32_to_cpu(p->inode));
> }
> fail:
> - SetPageError(page);
> + folio_set_error(folio);
> return false;
> }
>
> @@ -195,9 +195,9 @@ static void *ext2_get_page(struct inode *dir, unsigned long n,
>
> if (IS_ERR(folio))
> return ERR_CAST(folio);
> - page_addr = kmap_local_folio(folio, n & (folio_nr_pages(folio) - 1));
> + page_addr = kmap_local_folio(folio, 0);
> if (unlikely(!folio_test_checked(folio))) {
> - if (!ext2_check_page(&folio->page, quiet, page_addr))
> + if (!ext2_check_folio(folio, quiet, page_addr))
> goto fail;
> }
> *page = &folio->page;
> --
> 2.40.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
next prev parent reply other threads:[~2023-10-03 10:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-21 20:07 [PATCH 01/10] highmem: Add folio_release_kmap() Matthew Wilcox (Oracle)
2023-09-21 20:07 ` [PATCH 02/10] ext2: Convert ext2_check_page to ext2_check_folio Matthew Wilcox (Oracle)
2023-10-03 10:40 ` Jan Kara [this message]
2023-10-03 10:52 ` Jan Kara
2023-10-05 18:27 ` Matthew Wilcox
2023-10-03 11:02 ` Jan Kara
2023-09-21 20:07 ` [PATCH 03/10] ext2: Add ext2_get_folio() Matthew Wilcox (Oracle)
2023-09-21 20:07 ` [PATCH 04/10] ext2: Convert ext2_readdir to use a folio Matthew Wilcox (Oracle)
2023-09-21 20:07 ` [PATCH 05/10] ext2: Convert ext2_add_link() " Matthew Wilcox (Oracle)
2023-09-21 20:07 ` [PATCH 06/10] ext2: Convert ext2_empty_dir() " Matthew Wilcox (Oracle)
2023-09-21 20:07 ` [PATCH 07/10] ext2: Handle large block size directories in ext2_delete_entry() Matthew Wilcox (Oracle)
2023-10-25 18:17 ` Jan Kara
2023-09-21 20:07 ` [PATCH 08/10] ext2: Convert ext2_unlink() and ext2_rename() to use folios Matthew Wilcox (Oracle)
2023-10-25 18:20 ` Jan Kara
2023-09-21 20:07 ` [PATCH 09/10] ext2: Convert ext2_make_empty() to use a folio Matthew Wilcox (Oracle)
2023-10-03 10:41 ` [PATCH 01/10] highmem: Add folio_release_kmap() Jan Kara
2023-10-03 11:55 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231003104017.ohuyl3fv2mobif5u@quack3 \
--to=jack@suse.cz \
--cc=fmdefrancesco@gmail.com \
--cc=jack@suse.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox