From: Zhang Yi <yi.zhang@huaweicloud.com>
To: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, tytso@mit.edu,
adilger.kernel@dilger.ca, jack@suse.cz, ritesh.list@gmail.com,
hch@infradead.org, djwong@kernel.org, willy@infradead.org,
yi.zhang@huawei.com, yi.zhang@huaweicloud.com,
chengzhihao1@huawei.com, yukuai3@huawei.com,
wangkefeng.wang@huawei.com
Subject: [RFC PATCH v2 06/25] ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type
Date: Tue, 2 Jan 2024 20:38:59 +0800 [thread overview]
Message-ID: <20240102123918.799062-7-yi.zhang@huaweicloud.com> (raw)
In-Reply-To: <20240102123918.799062-1-yi.zhang@huaweicloud.com>
From: Zhang Yi <yi.zhang@huawei.com>
Since ext4_map_blocks() can recognize a delayed allocated only extent,
make ext4_set_iomap() can also recognize it, and remove the useless
separate check in ext4_iomap_begin_report().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
fs/ext4/inode.c | 32 +++-----------------------------
1 file changed, 3 insertions(+), 29 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c141bf6d8db2..0458d7f0c059 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3261,6 +3261,9 @@ static void ext4_set_iomap(struct inode *inode, struct iomap *iomap,
iomap->addr = (u64) map->m_pblk << blkbits;
if (flags & IOMAP_DAX)
iomap->addr += EXT4_SB(inode->i_sb)->s_dax_part_off;
+ } else if (map->m_flags & EXT4_MAP_DELAYED) {
+ iomap->type = IOMAP_DELALLOC;
+ iomap->addr = IOMAP_NULL_ADDR;
} else {
iomap->type = IOMAP_HOLE;
iomap->addr = IOMAP_NULL_ADDR;
@@ -3423,35 +3426,11 @@ const struct iomap_ops ext4_iomap_overwrite_ops = {
.iomap_end = ext4_iomap_end,
};
-static bool ext4_iomap_is_delalloc(struct inode *inode,
- struct ext4_map_blocks *map)
-{
- struct extent_status es;
- ext4_lblk_t offset = 0, end = map->m_lblk + map->m_len - 1;
-
- ext4_es_find_extent_range(inode, &ext4_es_is_delayed,
- map->m_lblk, end, &es);
-
- if (!es.es_len || es.es_lblk > end)
- return false;
-
- if (es.es_lblk > map->m_lblk) {
- map->m_len = es.es_lblk - map->m_lblk;
- return false;
- }
-
- offset = map->m_lblk - es.es_lblk;
- map->m_len = es.es_len - offset;
-
- return true;
-}
-
static int ext4_iomap_begin_report(struct inode *inode, loff_t offset,
loff_t length, unsigned int flags,
struct iomap *iomap, struct iomap *srcmap)
{
int ret;
- bool delalloc = false;
struct ext4_map_blocks map;
u8 blkbits = inode->i_blkbits;
@@ -3492,13 +3471,8 @@ static int ext4_iomap_begin_report(struct inode *inode, loff_t offset,
ret = ext4_map_blocks(NULL, inode, &map, 0);
if (ret < 0)
return ret;
- if (ret == 0)
- delalloc = ext4_iomap_is_delalloc(inode, &map);
-
set_iomap:
ext4_set_iomap(inode, iomap, &map, offset, length, flags);
- if (delalloc && iomap->type == IOMAP_HOLE)
- iomap->type = IOMAP_DELALLOC;
return 0;
}
--
2.39.2
next prev parent reply other threads:[~2024-01-02 12:42 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-02 12:38 [RFC PATCH v2 00/25] ext4: use iomap for regular file's buffered IO path and enable large foilo Zhang Yi
2024-01-02 12:38 ` [RFC PATCH v2 01/25] ext4: refactor ext4_da_map_blocks() Zhang Yi
2024-01-03 9:56 ` Jan Kara
2024-01-02 12:38 ` [RFC PATCH v2 02/25] ext4: convert to exclusive lock while inserting delalloc extents Zhang Yi
2024-01-03 10:03 ` Jan Kara
2024-01-02 12:38 ` [RFC PATCH v2 03/25] ext4: correct the hole length returned by ext4_map_blocks() Zhang Yi
2024-01-03 11:02 ` Jan Kara
2024-01-02 12:38 ` [RFC PATCH v2 04/25] ext4: add a hole extent entry in cache after punch Zhang Yi
2024-01-03 11:04 ` Jan Kara
2024-01-02 12:38 ` [RFC PATCH v2 05/25] ext4: make ext4_map_blocks() distinguish delalloc only extent Zhang Yi
2024-01-03 11:31 ` Jan Kara
2024-01-03 13:20 ` Zhang Yi
2024-01-02 12:38 ` Zhang Yi [this message]
2024-01-03 11:35 ` [RFC PATCH v2 06/25] ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type Jan Kara
2024-01-02 12:39 ` [RFC PATCH v2 07/25] iomap: don't increase i_size if it's not a write operation Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 08/25] iomap: add pos and dirty_len into trace_iomap_writepage_map Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 09/25] ext4: allow inserting delalloc extents with multi-blocks Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 10/25] ext4: correct delalloc extent length Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 11/25] ext4: also mark extent as delalloc if it's been unwritten Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 12/25] ext4: factor out bh handles to ext4_da_get_block_prep() Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 13/25] ext4: use reserved metadata blocks when splitting extent in endio Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 14/25] ext4: introduce seq counter for extent entry Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 15/25] ext4: add a new iomap aops for regular file's buffered IO path Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 16/25] ext4: implement buffered read iomap path Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 17/25] ext4: implement buffered write " Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 18/25] ext4: implement writeback " Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 19/25] ext4: implement mmap " Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 20/25] ext4: implement zero_range " Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 21/25] ext4: writeback partial blocks before zero range Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 22/25] ext4: fall back to buffer_head path for defrag Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 23/25] ext4: partially enable iomap for regular file's buffered IO path Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 24/25] filemap: support disable large folios on active inode Zhang Yi
2024-01-02 12:39 ` [RFC PATCH v2 25/25] ext4: enable large folio for regular file with iomap buffered IO path Zhang Yi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240102123918.799062-7-yi.zhang@huaweicloud.com \
--to=yi.zhang@huaweicloud.com \
--cc=adilger.kernel@dilger.ca \
--cc=chengzhihao1@huawei.com \
--cc=djwong@kernel.org \
--cc=hch@infradead.org \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=ritesh.list@gmail.com \
--cc=tytso@mit.edu \
--cc=wangkefeng.wang@huawei.com \
--cc=willy@infradead.org \
--cc=yi.zhang@huawei.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox