From: Maximilian Heyne <mheyne@amazon.de>
Cc: <ravib@amazon.com>, Maximilian Heyne <mheyne@amazon.de>,
<stable@vger.kernel.org>, Theodore Ts'o <tytso@mit.edu>,
Andreas Dilger <adilger.kernel@dilger.ca>,
Yongqiang Yang <xiaoqiangnk@gmail.com>,
<linux-ext4@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2] ext4: fix corruption during on-line resize
Date: Thu, 15 Feb 2024 15:50:09 +0000 [thread overview]
Message-ID: <20240215155009.94493-1-mheyne@amazon.de> (raw)
We observed a corruption during on-line resize of a file system that is
larger than 16 TiB with 4k block size. With having more then 2^32 blocks
resize_inode is turned off by default by mke2fs. The issue can be
reproduced on a smaller file system for convenience by explicitly
turning off resize_inode. An on-line resize across an 8 GiB boundary (the
size of a meta block group in this setup) then leads to a corruption:
dev=/dev/<some_dev> # should be >= 16 GiB
mkdir -p /corruption
/sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15))
mount -t ext4 $dev /corruption
dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15))
sha1sum /corruption/test
# 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test
/sbin/resize2fs $dev $((2*2**21))
# drop page cache to force reload the block from disk
echo 1 > /proc/sys/vm/drop_caches
sha1sum /corruption/test
# 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test
2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per
block group and 2^6 are the number of block groups that make a meta
block group.
The last checksum might be different depending on how the file is laid
out across the physical blocks. The actual corruption occurs at physical
block 63*2^15 = 2064384 which would be the location of the backup of the
meta block group's block descriptor. During the on-line resize the file
system will be converted to meta_bg starting at s_first_meta_bg which is
2 in the example - meaning all block groups after 16 GiB. However, in
ext4_flex_group_add we might add block groups that are not part of the
first meta block group yet. In the reproducer we achieved this by
substracting the size of a whole block group from the point where the
meta block group would start. This must be considered when updating the
backup block group descriptors to follow the non-meta_bg layout. The fix
is to add a test whether the group to add is already part of the meta
block group or not.
Fixes: 01f795f9e0d67 ("ext4: add online resizing support for meta_bg and 64-bit file systems")
Cc: stable@vger.kernel.org
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
---
fs/ext4/resize.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 4d4a5a32e310..3c0d12382e06 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1602,7 +1602,8 @@ static int ext4_flex_group_add(struct super_block *sb,
int gdb_num = group / EXT4_DESC_PER_BLOCK(sb);
int gdb_num_end = ((group + flex_gd->count - 1) /
EXT4_DESC_PER_BLOCK(sb));
- int meta_bg = ext4_has_feature_meta_bg(sb);
+ int meta_bg = ext4_has_feature_meta_bg(sb) &&
+ gdb_num >= le32_to_cpu(es->s_first_meta_bg);
sector_t padding_blocks = meta_bg ? 0 : sbi->s_sbh->b_blocknr -
ext4_group_first_block_no(sb, 0);
--
2.40.1
Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879
next reply other threads:[~2024-02-15 15:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 15:50 Maximilian Heyne [this message]
2024-02-19 7:06 ` [External] : [PATCH v2] ext4: fix corruption during on-line resize Srivathsa Dara
2024-02-22 15:54 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240215155009.94493-1-mheyne@amazon.de \
--to=mheyne@amazon.de \
--cc=adilger.kernel@dilger.ca \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ravib@amazon.com \
--cc=stable@vger.kernel.org \
--cc=tytso@mit.edu \
--cc=xiaoqiangnk@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox