From: Jan Kara <jack@suse.cz>
To: Ted Tso <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>,
Alexey Zhuravlev <azhuravlev@ddn.com>,
Andreas Dilger <adilger@dilger.ca>,
Zhang Yi <yi.zhang@huawei.com>, Jan Kara <jack@suse.cz>
Subject: [PATCH v2] jbd2: Avoid long replay times due to high number or revoke blocks
Date: Tue, 21 Jan 2025 15:09:26 +0100 [thread overview]
Message-ID: <20250121140925.17231-2-jack@suse.cz> (raw)
Some users are reporting journal replay takes a long time when there is
excessive number of revoke blocks in the journal. Reported times are
like:
1048576 records - 95 seconds
2097152 records - 580 seconds
The problem is that hash chains in the revoke table gets excessively
long in these cases. Fix the problem by sizing the revoke table
appropriately before the revoke pass.
Thanks to Alexey Zhuravlev <azhuravlev@ddn.com> for benchmarking the
patch with large numbers of revoke blocks [1].
[1] https://lore.kernel.org/all/20250113183107.7bfef7b6@x390.bzzz77.ru
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/jbd2/recovery.c | 58 ++++++++++++++++++++++++++++++++++++--------
fs/jbd2/revoke.c | 8 +++---
include/linux/jbd2.h | 2 ++
3 files changed, 54 insertions(+), 14 deletions(-)
Changes since v1:
* rebased on 6.13
* move check in do_one_pass()
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 9192be7c19d8..7c23a8be673f 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -39,7 +39,7 @@ struct recovery_info
static int do_one_pass(journal_t *journal,
struct recovery_info *info, enum passtype pass);
-static int scan_revoke_records(journal_t *, struct buffer_head *,
+static int scan_revoke_records(journal_t *, enum passtype, struct buffer_head *,
tid_t, struct recovery_info *);
#ifdef __KERNEL__
@@ -327,6 +327,12 @@ int jbd2_journal_recover(journal_t *journal)
journal->j_transaction_sequence, journal->j_head);
jbd2_journal_clear_revoke(journal);
+ /* Free revoke table allocated for replay */
+ if (journal->j_revoke != journal->j_revoke_table[0] &&
+ journal->j_revoke != journal->j_revoke_table[1]) {
+ jbd2_journal_destroy_revoke_table(journal->j_revoke);
+ journal->j_revoke = journal->j_revoke_table[1];
+ }
err2 = sync_blockdev(journal->j_fs_dev);
if (!err)
err = err2;
@@ -612,6 +618,31 @@ static int do_one_pass(journal_t *journal,
first_commit_ID = next_commit_ID;
if (pass == PASS_SCAN)
info->start_transaction = first_commit_ID;
+ else if (pass == PASS_REVOKE) {
+ /*
+ * Would the default revoke table have too long hash chains
+ * during replay?
+ */
+ if (info->nr_revokes > JOURNAL_REVOKE_DEFAULT_HASH * 16) {
+ unsigned int hash_size;
+
+ /*
+ * Aim for average chain length of 8, limit at 1M
+ * entries to avoid problems with malicious
+ * filesystems.
+ */
+ hash_size = min(roundup_pow_of_two(info->nr_revokes / 8),
+ 1U << 20);
+ journal->j_revoke =
+ jbd2_journal_init_revoke_table(hash_size);
+ if (!journal->j_revoke) {
+ printk(KERN_ERR
+ "JBD2: failed to allocate revoke table for replay with %u entries. "
+ "Journal replay may be slow.\n", hash_size);
+ journal->j_revoke = journal->j_revoke_table[1];
+ }
+ }
+ }
jbd2_debug(1, "Starting recovery pass %d\n", pass);
@@ -851,6 +882,13 @@ static int do_one_pass(journal_t *journal,
continue;
case JBD2_REVOKE_BLOCK:
+ /*
+ * If we aren't in the SCAN or REVOKE pass, then we can
+ * just skip over this block.
+ */
+ if (pass != PASS_REVOKE && pass != PASS_SCAN)
+ continue;
+
/*
* Check revoke block crc in pass_scan, if csum verify
* failed, check commit block time later.
@@ -863,12 +901,7 @@ static int do_one_pass(journal_t *journal,
need_check_commit_time = true;
}
- /* If we aren't in the REVOKE pass, then we can
- * just skip over this block. */
- if (pass != PASS_REVOKE)
- continue;
-
- err = scan_revoke_records(journal, bh,
+ err = scan_revoke_records(journal, pass, bh,
next_commit_ID, info);
if (err)
goto failed;
@@ -922,8 +955,9 @@ static int do_one_pass(journal_t *journal,
/* Scan a revoke record, marking all blocks mentioned as revoked. */
-static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
- tid_t sequence, struct recovery_info *info)
+static int scan_revoke_records(journal_t *journal, enum passtype pass,
+ struct buffer_head *bh, tid_t sequence,
+ struct recovery_info *info)
{
jbd2_journal_revoke_header_t *header;
int offset, max;
@@ -944,6 +978,11 @@ static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
if (jbd2_has_feature_64bit(journal))
record_len = 8;
+ if (pass == PASS_SCAN) {
+ info->nr_revokes += (max - offset) / record_len;
+ return 0;
+ }
+
while (offset + record_len <= max) {
unsigned long long blocknr;
int err;
@@ -956,7 +995,6 @@ static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
err = jbd2_journal_set_revoke(journal, blocknr, sequence);
if (err)
return err;
- ++info->nr_revokes;
}
return 0;
}
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index 4556e4689024..f4ac308e84c5 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -215,7 +215,7 @@ int __init jbd2_journal_init_revoke_table_cache(void)
return 0;
}
-static struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size)
+struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size)
{
int shift = 0;
int tmp = hash_size;
@@ -231,7 +231,7 @@ static struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size)
table->hash_size = hash_size;
table->hash_shift = shift;
table->hash_table =
- kmalloc_array(hash_size, sizeof(struct list_head), GFP_KERNEL);
+ kvmalloc_array(hash_size, sizeof(struct list_head), GFP_KERNEL);
if (!table->hash_table) {
kmem_cache_free(jbd2_revoke_table_cache, table);
table = NULL;
@@ -245,7 +245,7 @@ static struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size)
return table;
}
-static void jbd2_journal_destroy_revoke_table(struct jbd2_revoke_table_s *table)
+void jbd2_journal_destroy_revoke_table(struct jbd2_revoke_table_s *table)
{
int i;
struct list_head *hash_list;
@@ -255,7 +255,7 @@ static void jbd2_journal_destroy_revoke_table(struct jbd2_revoke_table_s *table)
J_ASSERT(list_empty(hash_list));
}
- kfree(table->hash_table);
+ kvfree(table->hash_table);
kmem_cache_free(jbd2_revoke_table_cache, table);
}
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 50f7ea8714bf..610841635204 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1634,6 +1634,8 @@ extern void jbd2_journal_destroy_revoke_record_cache(void);
extern void jbd2_journal_destroy_revoke_table_cache(void);
extern int __init jbd2_journal_init_revoke_record_cache(void);
extern int __init jbd2_journal_init_revoke_table_cache(void);
+struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size);
+void jbd2_journal_destroy_revoke_table(struct jbd2_revoke_table_s *table);
extern void jbd2_journal_destroy_revoke(journal_t *);
extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
--
2.43.0
next reply other threads:[~2025-01-21 14:10 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-21 14:09 Jan Kara [this message]
2025-01-22 1:47 ` [PATCH v2] jbd2: Avoid long replay times due to high number or revoke blocks Zhang Yi
2025-01-24 22:28 ` Andreas Dilger
2025-02-13 16:00 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250121140925.17231-2-jack@suse.cz \
--to=jack@suse.cz \
--cc=adilger@dilger.ca \
--cc=azhuravlev@ddn.com \
--cc=linux-ext4@vger.kernel.org \
--cc=tytso@mit.edu \
--cc=yi.zhang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox