[PATCH AUTOSEL 6.19-6.6] ext4: move ext4_percpu_param_init() before ext4_mb_init()

[Sasha Levin <sashal@kernel.org>]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 270564513489d98b721a1e4a10017978d5213bff ]

When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:

==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
                        comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
                        6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
 <TASK>
 ext4_mark_group_bitmap_corrupted+0xcb/0xe0
 ext4_validate_block_bitmap+0x2a1/0x2f0
 ext4_read_block_bitmap+0x33/0x50
 mb_group_bb_bitmap_alloc+0x33/0x80
 ext4_mb_add_groupinfo+0x190/0x250
 ext4_mb_init_backend+0x87/0x290
 ext4_mb_init+0x456/0x640
 __ext4_fill_super+0x1072/0x1680
 ext4_fill_super+0xd3/0x280
 get_tree_bdev_flags+0x132/0x1d0
 vfs_get_tree+0x29/0xd0
 vfs_cmd_create+0x59/0xe0
 __do_sys_fsconfig+0x4f6/0x6b0
 do_syscall_64+0x50/0x1f0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================

This issue can be reproduced using the following commands:
        mkfs.ext4 -F -q -b 1024 /dev/sda 5G
        tune2fs -O quota,project /dev/sda
        mount /dev/sda /tmp/test

With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.

Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20251209133116.731350-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

LLM Generated explanations, may be completely bogus:

## Analysis of ext4: move ext4_percpu_param_init() before ext4_mb_init()

### 1. COMMIT MESSAGE ANALYSIS

The commit message is exceptionally detailed and clearly describes:
- **A concrete, reproducible crash** (kernel panic / page fault / oops)
- **Exact reproduction steps** (`mkfs.ext4 -F -q -b 1024 /dev/sda 5G;
  tune2fs -O quota,project /dev/sda; mount /dev/sda /tmp/test`)
- **Full stack trace** showing the crash in `percpu_counter_add_batch`
  called from `ext4_mark_group_bitmap_corrupted` during `ext4_mb_init`
- **Root cause**: `sbi->s_freeclusters_counter` (a percpu_counter) is
  used before it's initialized because `ext4_percpu_param_init()` was
  called *after* `ext4_mb_init()`

The trigger is a corrupted block bitmap encountered during mount with
`DOUBLE_CHECK` defined. When `ext4_validate_block_bitmap` fails and
calls `ext4_mark_group_bitmap_corrupted`, it tries to update a percpu
counter that hasn't been initialized yet.

### 2. CODE CHANGE ANALYSIS

The fix is straightforward reordering:

1. **Move `ext4_percpu_param_init(sbi)` call BEFORE `ext4_mb_init(sb)`**
   — This ensures percpu counters are initialized before `ext4_mb_init`
   can potentially use them via bitmap validation error paths.

2. **Move `ext4_percpu_param_destroy(sbi)` to the `failed_mount5`
   label** — This adjusts the cleanup ordering to match the new
   initialization ordering. Previously it was at `failed_mount6` (after
   `ext4_mb_release`), now it's at `failed_mount5` (before
   `ext4_mb_release` but still cleaning up properly).

The error path handling is also correctly adjusted: if
`ext4_percpu_param_init` fails, it jumps to `failed_mount5` which now
calls `ext4_percpu_param_destroy`. If `ext4_mb_init` fails, it also
jumps to `failed_mount5`, which will now properly destroy the percpu
params that were initialized.

Let me verify the error path correctness more carefully:

- **Before the change**: `failed_mount6` → `ext4_mb_release`,
  `ext4_flex_groups_free`, `ext4_percpu_param_destroy` → falls through
  to `failed_mount5` → `ext4_ext_release`, etc.
- **After the change**: `failed_mount6` → `ext4_mb_release`,
  `ext4_flex_groups_free` → falls through to `failed_mount5` →
  `ext4_percpu_param_destroy` → `ext4_ext_release`, etc.

This is correct: the destroy is still called on all paths where init
succeeded, and the ordering is proper (mb_release before
percpu_param_destroy, which mirrors the new init ordering).

### 3. CLASSIFICATION

This is a clear **bug fix** — it fixes a **NULL pointer dereference /
page fault** during mount. The crash occurs when:
1. A filesystem with corrupted block bitmap is mounted
2. `ext4_mb_init` reads and validates block bitmaps
3. Validation fails, triggering `ext4_mark_group_bitmap_corrupted`
4. That function tries to update an uninitialized percpu counter →
   **crash**

While the reproduction requires `DOUBLE_CHECK` to be defined in the test
scenario described, the underlying issue is that `ext4_mb_init` can
access percpu counters before they're initialized. This could
potentially be triggered in other scenarios too.

### 4. SCOPE AND RISK ASSESSMENT

- **Lines changed**: Very small — moving a few lines of code (function
  call reordering + error label adjustment)
- **Files touched**: 1 file (`fs/ext4/super.c`)
- **Subsystem**: ext4 filesystem — one of the most widely used Linux
  filesystems
- **Risk**: Very low. The change is a simple reordering of
  initialization. `ext4_percpu_param_init` has no dependency on
  `ext4_mb_init`, so moving it before is safe. The error paths are
  correctly adjusted.
- **Could this break something?** Extremely unlikely — it just
  initializes counters earlier, which is strictly safer.

### 5. USER IMPACT

- **Who is affected**: Any user mounting an ext4 filesystem with
  corrupted block bitmaps
- **How severe**: Kernel panic / crash during mount — **HIGH severity**
- **Real-world scenario**: Filesystem corruption can happen due to power
  failure, hardware issues, etc. A mount attempt on a corrupted
  filesystem should not crash the kernel.

### 6. STABILITY INDICATORS

- **Reviewed-by: Zhang Yi** and **Reviewed-by: Jan Kara** (Jan Kara is a
  well-known ext4/filesystem developer)
- **Committed by: Theodore Ts'o** (ext4 maintainer)
- The fix is obviously correct — it's a simple initialization order fix

### 7. DEPENDENCY CHECK

This commit is self-contained. It only reorders existing function calls
in `__ext4_fill_super()`. The functions `ext4_percpu_param_init()` and
`ext4_mb_init()` both exist in stable trees. No additional commits are
needed.

### Summary

This is a textbook stable backport candidate:
- **Fixes a real crash** (kernel panic on mount with corrupted
  filesystem)
- **Small, surgical fix** (just reordering initialization + adjusting
  error cleanup)
- **No new features** — purely defensive initialization ordering
- **Low risk** — the change is obviously correct
- **Important subsystem** — ext4 is used by millions of systems
- **Reviewed by subsystem experts** including Jan Kara and committed by
  Ted Ts'o
- **Meets all stable kernel rules**: obviously correct, fixes real bug,
  small scope, tested

**YES**

 fs/ext4/super.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 87205660c5d02..5c2e931d8a533 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5604,6 +5604,10 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
 			clear_opt2(sb, MB_OPTIMIZE_SCAN);
 	}
 
+	err = ext4_percpu_param_init(sbi);
+	if (err)
+		goto failed_mount5;
+
 	err = ext4_mb_init(sb);
 	if (err) {
 		ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
@@ -5619,10 +5623,6 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb)
 		sbi->s_journal->j_commit_callback =
 			ext4_journal_commit_callback;
 
-	err = ext4_percpu_param_init(sbi);
-	if (err)
-		goto failed_mount6;
-
 	if (ext4_has_feature_flex_bg(sb))
 		if (!ext4_fill_flex_info(sb)) {
 			ext4_msg(sb, KERN_ERR,
@@ -5704,8 +5704,8 @@ failed_mount8: __maybe_unused
 failed_mount6:
 	ext4_mb_release(sb);
 	ext4_flex_groups_free(sbi);
-	ext4_percpu_param_destroy(sbi);
 failed_mount5:
+	ext4_percpu_param_destroy(sbi);
 	ext4_ext_release(sb);
 	ext4_release_system_zone(sb);
 failed_mount4a:
-- 
2.51.0