From: "Darrick J. Wong" <djwong@kernel.org>
To: Theodore Ts'o <tytso@mit.edu>
Cc: Ext4 Developers List <linux-ext4@vger.kernel.org>
Subject: Re: [PATCH 2/3] libsupport: add a portable get_thread_id() function
Date: Thu, 2 Apr 2026 21:17:52 -0700 [thread overview]
Message-ID: <20260403041752.GE6254@frogsfrogsfrogs> (raw)
In-Reply-To: <20260403040328.2385083-3-tytso@mit.edu>
On Fri, Apr 03, 2026 at 12:03:27AM -0400, Theodore Ts'o wrote:
> The gettid() system call is only available on Linux. So create a new
> function, get_thread_id() which implements a number of different ways
> of providing a thread id as an integer.
>
> Use get_thread_id() instead of gettid() in fuse2fs.
>
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> ---
> configure | 12 ++++++++++++
> configure.ac | 2 ++
> lib/config.h.in | 6 ++++++
> lib/support/Makefile.in | 13 +++++++++++--
> lib/support/thread.c | 36 ++++++++++++++++++++++++++++++++++++
> lib/support/thread.h | 5 +++++
> misc/fuse2fs.c | 3 ++-
> 7 files changed, 74 insertions(+), 3 deletions(-)
> create mode 100644 lib/support/thread.c
> create mode 100644 lib/support/thread.h
>
> diff --git a/configure b/configure
> index b9a82dcec..b04b31aff 100755
> --- a/configure
> +++ b/configure
> @@ -13749,6 +13749,12 @@ if test "x$ac_cv_func_getrusage" = xyes
> then :
> printf "%s\n" "#define HAVE_GETRUSAGE 1" >>confdefs.h
>
> +fi
> +ac_fn_c_check_func "$LINENO" "gettid" "ac_cv_func_gettid"
> +if test "x$ac_cv_func_gettid" = xyes
> +then :
> + printf "%s\n" "#define HAVE_GETTID 1" >>confdefs.h
> +
> fi
> ac_fn_c_check_func "$LINENO" "jrand48" "ac_cv_func_jrand48"
> if test "x$ac_cv_func_jrand48" = xyes
> @@ -13893,6 +13899,12 @@ if test "x$ac_cv_func_pthread_setname_np" = xyes
> then :
> printf "%s\n" "#define HAVE_PTHREAD_SETNAME_NP 1" >>confdefs.h
>
> +fi
> +ac_fn_c_check_func "$LINENO" "pthread_threadid_np" "ac_cv_func_pthread_threadid_np"
> +if test "x$ac_cv_func_pthread_threadid_np" = xyes
> +then :
> + printf "%s\n" "#define HAVE_PTHREAD_THREADID_NP 1" >>confdefs.h
> +
> fi
> ac_fn_c_check_func "$LINENO" "qsort_r" "ac_cv_func_qsort_r"
> if test "x$ac_cv_func_qsort_r" = xyes
> diff --git a/configure.ac b/configure.ac
> index 2473879fd..4921f81f7 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -1246,6 +1246,7 @@ AC_CHECK_FUNCS(m4_flatten([
> getrandom
> getrlimit
> getrusage
> + gettid
> jrand48
> keyctl
> llistxattr
> @@ -1270,6 +1271,7 @@ AC_CHECK_FUNCS(m4_flatten([
> pread64
> pwrite64
> pthread_setname_np
> + pthread_threadid_np
> qsort_r
> secure_getenv
> setmntent
> diff --git a/lib/config.h.in b/lib/config.h.in
> index c6cbced5f..f129abfe7 100644
> --- a/lib/config.h.in
> +++ b/lib/config.h.in
> @@ -181,6 +181,9 @@
> /* Define if the GNU gettext() function is already present or preinstalled. */
> #undef HAVE_GETTEXT
>
> +/* Define to 1 if you have the 'gettid' function. */
> +#undef HAVE_GETTID
> +
> /* Define to 1 if you have the GNU-style 'qsort_r' function. */
> #undef HAVE_GNU_QSORT_R
>
> @@ -331,6 +334,9 @@
> /* Define to 1 if you have the 'pthread_setname_np' function. */
> #undef HAVE_PTHREAD_SETNAME_NP
>
> +/* Define to 1 if you have the 'pthread_threadid_np' function. */
> +#undef HAVE_PTHREAD_THREADID_NP
> +
> /* Define to 1 if you have the 'pwrite' function. */
> #undef HAVE_PWRITE
>
> diff --git a/lib/support/Makefile.in b/lib/support/Makefile.in
> index 6383816fd..9aac9cf00 100644
> --- a/lib/support/Makefile.in
> +++ b/lib/support/Makefile.in
> @@ -25,6 +25,7 @@ OBJS= bthread.o \
> quotaio.o \
> quotaio_v2.o \
> quotaio_tree.o \
> + thread.o \
> dict.o \
> devname.o
>
> @@ -41,6 +42,7 @@ SRCS= $(srcdir)/argv_parse.c \
> $(srcdir)/quotaio.c \
> $(srcdir)/quotaio_tree.c \
> $(srcdir)/quotaio_v2.c \
> + $(srcdir)/thread.c \
> $(srcdir)/dict.c \
> $(srcdir)/devname.c
>
> @@ -81,10 +83,15 @@ test_cstring: $(srcdir)/cstring.c
> $(Q) $(CC) -o test_cstring -DDEBUG_PROGRAM $(srcdir)/cstring.c \
> $(ALL_CFLAGS)
>
> +test_thread: $(srcdir)/thread.c
> + $(E) " CC $@"
> + $(Q) $(CC) -o test_thread -DDEBUG_PROGRAM $(srcdir)/thread.c \
> + $(ALL_CFLAGS)
> +
> clean::
> $(RM) -f \#* *.s *.o *.a *~ *.bak core profiled/* \
> ../libsupport.a ../libsupport_p.a $(SMANPAGES) \
> - prof_err.c prof_err.h test_profile test_cstring
> + prof_err.c prof_err.h test_profile test_cstring test_thread
>
> #fullcheck check:: tst_uuid
> # LD_LIBRARY_PATH=$(LIB) DYLD_LIBRARY_PATH=$(LIB) ./tst_uuid
> @@ -111,7 +118,7 @@ $(OBJS):
> argv_parse.o: $(srcdir)/argv_parse.c $(top_builddir)/lib/config.h \
> $(top_builddir)/lib/dirpaths.h $(srcdir)/argv_parse.h
> bthread.o: $(srcdir)/bthread.c $(top_builddir)/lib/config.h \
> - $(srcdir)/bthread.h
> + $(top_builddir)/lib/dirpaths.h $(srcdir)/bthread.h
> cstring.o: $(srcdir)/cstring.c $(top_builddir)/lib/config.h \
> $(top_builddir)/lib/dirpaths.h $(srcdir)/cstring.h
> mkquota.o: $(srcdir)/mkquota.c $(top_builddir)/lib/config.h \
> @@ -183,6 +190,8 @@ quotaio_v2.o: $(srcdir)/quotaio_v2.c $(top_builddir)/lib/config.h \
> $(top_srcdir)/lib/ext2fs/ext2_ext_attr.h $(top_srcdir)/lib/ext2fs/hashmap.h \
> $(top_srcdir)/lib/ext2fs/bitops.h $(srcdir)/dqblk_v2.h \
> $(srcdir)/quotaio_tree.h
> +thread.o: $(srcdir)/thread.c $(top_builddir)/lib/config.h \
> + $(top_builddir)/lib/dirpaths.h $(srcdir)/thread.h
> dict.o: $(srcdir)/dict.c $(top_builddir)/lib/config.h \
> $(top_builddir)/lib/dirpaths.h $(srcdir)/dict.h
> devname.o: $(srcdir)/devname.c $(top_builddir)/lib/config.h \
> diff --git a/lib/support/thread.c b/lib/support/thread.c
> new file mode 100644
> index 000000000..a9a10940c
> --- /dev/null
> +++ b/lib/support/thread.c
> @@ -0,0 +1,36 @@
> +/*
> + * thread.c - utility functions for Posix threads
Should these new files have an explicit license specification?
Other than that,
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
--D
> + */
> +
> +#include "config.h"
> +#ifdef HAVE_PTHREAD
> +#include <pthread.h>
> +#endif
> +#include <stdint.h>
> +#include <stdio.h>
> +#include <unistd.h>
> +
> +#include "support/thread.h"
> +
> +uint64_t get_thread_id(void)
> +{
> +#if defined(HAVE_GETTID)
> + return gettid();
> +#elif defined(HAVE_PTHREAD_THREADID_NP)
> + uint64_t tid;
> +
> + if (pthread_threadid_np(NULL, &tid))
> + return tid;
> +#elif defined(HAVE_PTHREAD)
> + return (__u64)(uintptr_t) pthread_self();
> +#endif
> + return getpid();
> +}
> +
> +#ifdef DEBUG_PROGRAM
> +int main(int argc, char **argv)
> +{
> + printf("Thread id: %llu\n", get_thread_id());
> + return 0;
> +}
> +#endif
> diff --git a/lib/support/thread.h b/lib/support/thread.h
> new file mode 100644
> index 000000000..9a7f5c9db
> --- /dev/null
> +++ b/lib/support/thread.h
> @@ -0,0 +1,5 @@
> +/*
> + * thread.h -- header file for thread utilities
> + */
> +
> +uint64_t get_thread_id(void);
> diff --git a/misc/fuse2fs.c b/misc/fuse2fs.c
> index 0b43ec0fb..dfbc98636 100644
> --- a/misc/fuse2fs.c
> +++ b/misc/fuse2fs.c
> @@ -48,6 +48,7 @@
> #include "ext2fs/ext2_fs.h"
> #include "ext2fs/ext2fsP.h"
> #include "support/bthread.h"
> +#include "support/thread.h"
> #if FUSE_VERSION >= FUSE_MAKE_VERSION(3, 0)
> # define FUSE_PLATFORM_OPTS ""
> #else
> @@ -148,7 +149,7 @@ static inline uint64_t round_down(uint64_t b, unsigned int align)
>
> #define dbg_printf(fuse2fs, format, ...) \
> while ((fuse2fs)->debug) { \
> - printf("FUSE2FS (%s): tid=%d " format, (fuse2fs)->shortdev, gettid(), ##__VA_ARGS__); \
> + printf("FUSE2FS (%s): tid=%llu " format, (fuse2fs)->shortdev, get_thread_id(), ##__VA_ARGS__); \
> fflush(stdout); \
> break; \
> }
> --
> 2.51.0
>
next prev parent reply other threads:[~2026-04-03 4:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-03 4:03 [PATCH -e2fsprogs 0/3] Fix portability issues on MacOS Theodore Ts'o
2026-04-03 4:03 ` [PATCH 1/3] libsupport: fix portability issues with the bthread.c Theodore Ts'o
2026-04-03 4:16 ` Darrick J. Wong
2026-04-03 11:53 ` Theodore Tso
2026-04-03 15:15 ` Darrick J. Wong
2026-04-03 21:00 ` Theodore Tso
2026-04-03 4:03 ` [PATCH 2/3] libsupport: add a portable get_thread_id() function Theodore Ts'o
2026-04-03 4:17 ` Darrick J. Wong [this message]
2026-04-03 4:03 ` [PATCH 3/3] fuse2fs: fix build failure on systems which don't define EUCLEAN Theodore Ts'o
2026-04-03 4:18 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260403041752.GE6254@frogsfrogsfrogs \
--to=djwong@kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox