From: Tao Ma <tm@tao.ma>
To: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Lukas Czerner <lczerner@redhat.com>,
linux-ext4@vger.kernel.org, Theodore Ts'o <tytso@mit.edu>
Subject: Re: speed up group trim
Date: Sat, 22 Jan 2011 16:32:04 +0800 [thread overview]
Message-ID: <4D3A9604.1040001@tao.ma> (raw)
In-Reply-To: <CD6D9488-48B7-4964-97DF-76B985FC8FAF@dilger.ca>
Hi Andreas,
On 01/22/2011 01:53 AM, Andreas Dilger wrote:
> Actually, I had another idea which might speed up trim operations significantly. If the kernel keeps a bit in ext4_group_info->bb_state that indicates whether this group has any freed blocks since it last had a trim operation sent to it, then the kernel can completely avoid doing anything for that group. This isn't just avoiding the need to scan the bitmap for free ranges, but more importantly it avoids sending the TRIM/UNMAP operation to the disk for free ranges that were previously trimmed in the backing storage.
It looks good.
Just an extra point. we have to store 'minlen' passed in by
fstrim_range. So if the user first try minlen=1mb, and then we give them
the number we have trimmed. If he isn't satisfied, he can try
minlen=512kb again. In this case we have to check with the old 'minlen'
and retry again if minlen < old_minlen.
If there isn't any objection, I can put this to the patch.
Regards,
Tao
> Something like:
>
> #define EXT4_GROUP_INFO_NEED_TRIM_BIT 1
>
> /* Note that bit clear means a trim is needed, so that a newly mounted
> * filesystem assumes that holes the group need to be trimmed. */
> #define EXT4_MB_GRP_NEED_TRIM(grp) \
> (!test_bit(EXT4_GROUP_INFO_NEED_INIT_BIT,&((grp)->bb_state)))
>
>
> When calling the TRIM ioctl it can check EXT4_MB_GRP_NEED_TRIM(grp) and skip that group if it hasn't changed since last time. Otherwise, it should call EXT4_MB_GRP_DONE_TRIM(grp) before doing the actual trim, so it is not racy with another process freeing blocks in that group.
>
> In release_blocks_on_commit() it should call EXT4_MB_GRP_MUST_TRIM() to mark that the group needs to be trimmed again, since blocks were freed in the group.
>
> This can potentially avoid a huge number of TRIMs to the disk, if this is run periodically (e.g. every day) and the filesystem is not remounted all the time, and does not undergo huge allocate/free/allocate cycles during daily use.
>
> It would even be possible to store this bit on-disk ext4_group_desc->bg_flags to avoid the initial "assume every group needs to be trimmed" operation, if that ends up to be a significant factor. However, that can be done later once some numbers are measured on how significant the initial-mount overhead is. It is also not free, since it will cause disk IO to set/clear this bit.
>
> Cheers, Andreas
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-01-22 8:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-21 2:32 [PATCH] ext4: speed up group trim with the right free block count Tao Ma
2011-01-21 10:49 ` Lukas Czerner
2011-01-21 17:53 ` speed up group trim Andreas Dilger
2011-01-22 8:32 ` Tao Ma [this message]
2011-01-24 1:33 ` Andreas Dilger
2011-01-24 2:07 ` Tao Ma
2011-01-24 13:39 ` Lukas Czerner
2011-01-24 18:51 ` Andreas Dilger
2011-01-25 1:53 ` tm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D3A9604.1040001@tao.ma \
--to=tm@tao.ma \
--cc=adilger.kernel@dilger.ca \
--cc=lczerner@redhat.com \
--cc=linux-ext4@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).