From: Eric Sandeen <sandeen@redhat.com>
To: Ric Wheeler <ricwheeler@gmail.com>
Cc: Fredrick <fjohnber@zoho.com>, Ric Wheeler <rwheeler@redhat.com>,
"Theodore Ts'o" <tytso@mit.edu>,
linux-ext4@vger.kernel.org, Andreas Dilger <adilger@dilger.ca>,
wenqing.lz@taobao.com
Subject: Re: ext4_fallocate
Date: Wed, 27 Jun 2012 11:14:00 -0400 [thread overview]
Message-ID: <4FEB2338.9080008@redhat.com> (raw)
In-Reply-To: <4FEA1F18.6010206@redhat.com>
On 6/26/12 4:44 PM, Eric Sandeen wrote:
> On 6/26/12 3:57 PM, Eric Sandeen wrote:
>> On 6/26/12 3:30 PM, Ric Wheeler wrote:
...
>> I tried running this fio recipe on v3.3, which I think does a decent job of
>> emulating the situation (fallocate 1G, do random 1M writes into it, with
>> fsyncs after each):
>>
>> [test]
>> filename=testfile
>> rw=randwrite
>> size=1g
>> filesize=1g
>> bs=1024k
>> ioengine=sync
>> fallocate=1
>> fsync=1
I realized the kernel I tested on had a lot of debugging bells & whistles turned on. For a more performance-configured v3.3 kernel, I see much less impact, more or less negligible:
unwritten conversion on ext4:
WRITE: io=1024.0MB, aggrb=23077KB/s, minb=23631KB/s, maxb=23631KB/s, mint=45437msec, maxt=45437msec
WRITE: io=1024.0MB, aggrb=23040KB/s, minb=23593KB/s, maxb=23593KB/s, mint=45511msec, maxt=45511msec
WRITE: io=1024.0MB, aggrb=23011KB/s, minb=23564KB/s, maxb=23564KB/s, mint=45567msec, maxt=45567msec
overwrites on ext4:
WRITE: io=1024.0MB, aggrb=23046KB/s, minb=23599KB/s, maxb=23599KB/s, mint=45499msec, maxt=45499msec
WRITE: io=1024.0MB, aggrb=23222KB/s, minb=23780KB/s, maxb=23780KB/s, mint=45153msec, maxt=45153msec
WRITE: io=1024.0MB, aggrb=23031KB/s, minb=23584KB/s, maxb=23584KB/s, mint=45528msec, maxt=45528msec
So I guess it's interesting information; the debug kernel showed a much bigger difference; the performance-config'd kernel showed almost no difference.
FWIW, on this same kernel,
unwritten conversion on xfs:
WRITE: io=1024.0MB, aggrb=28409KB/s, minb=29091KB/s, maxb=29091KB/s, mint=36909msec, maxt=36909msec
WRITE: io=1024.0MB, aggrb=28372KB/s, minb=29053KB/s, maxb=29053KB/s, mint=36958msec, maxt=36958msec
WRITE: io=1024.0MB, aggrb=28406KB/s, minb=29088KB/s, maxb=29088KB/s, mint=36913msec, maxt=36913msec
overwrites on xfs:
WRITE: io=1024.0MB, aggrb=28268KB/s, minb=28946KB/s, maxb=28946KB/s, mint=37094msec, maxt=37094msec
WRITE: io=1024.0MB, aggrb=28316KB/s, minb=28995KB/s, maxb=28995KB/s, mint=37031msec, maxt=37031msec
WRITE: io=1024.0MB, aggrb=28576KB/s, minb=29262KB/s, maxb=29262KB/s, mint=36694msec, maxt=36694msec
-Eric
next prev parent reply other threads:[~2012-06-27 15:14 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-25 6:42 ext4_fallocate Fredrick
2012-06-25 7:33 ` ext4_fallocate Andreas Dilger
2012-06-28 15:12 ` ext4_fallocate Phillip Susi
2012-06-28 15:23 ` ext4_fallocate Eric Sandeen
2012-06-25 8:51 ` ext4_fallocate Zheng Liu
2012-06-25 19:04 ` ext4_fallocate Fredrick
2012-06-25 19:17 ` ext4_fallocate Theodore Ts'o
2012-06-26 1:23 ` ext4_fallocate Fredrick
2012-06-26 13:13 ` ext4_fallocate Ric Wheeler
2012-06-26 17:30 ` ext4_fallocate Theodore Ts'o
2012-06-26 18:06 ` ext4_fallocate Fredrick
2012-06-26 18:21 ` ext4_fallocate Ric Wheeler
2012-06-26 18:57 ` ext4_fallocate Ted Ts'o
2012-06-26 19:22 ` ext4_fallocate Ric Wheeler
2012-06-26 18:05 ` ext4_fallocate Fredrick
2012-06-26 18:59 ` ext4_fallocate Ted Ts'o
2012-06-26 19:30 ` ext4_fallocate Ric Wheeler
2012-06-26 19:57 ` ext4_fallocate Eric Sandeen
2012-06-26 20:44 ` ext4_fallocate Eric Sandeen
2012-06-27 15:14 ` Eric Sandeen [this message]
2012-06-27 19:30 ` ext4_fallocate Theodore Ts'o
2012-06-27 23:02 ` ext4_fallocate Eric Sandeen
2012-06-28 11:27 ` ext4_fallocate Ric Wheeler
2012-06-29 19:02 ` ext4_fallocate Andreas Dilger
2012-07-02 3:03 ` ext4_fallocate Zheng Liu
2012-06-28 12:48 ` ext4_fallocate Theodore Ts'o
2012-07-02 3:16 ` ext4_fallocate Zheng Liu
2012-07-02 16:33 ` ext4_fallocate Eric Sandeen
2012-07-02 17:44 ` ext4_fallocate Jan Kara
2012-07-02 17:48 ` ext4_fallocate Ric Wheeler
2012-07-03 17:41 ` ext4_fallocate Zheng Liu
2012-07-03 17:57 ` ext4_fallocate Zach Brown
2012-07-04 2:23 ` ext4_fallocate Zheng Liu
2012-07-02 18:01 ` ext4_fallocate Theodore Ts'o
2012-07-03 9:30 ` ext4_fallocate Jan Kara
2012-07-04 1:15 ` ext4_fallocate Phillip Susi
2012-07-04 2:36 ` ext4_fallocate Zheng Liu
2012-07-04 3:06 ` ext4_fallocate Phillip Susi
2012-07-04 3:48 ` ext4_fallocate Zheng Liu
2012-07-04 12:20 ` ext4_fallocate Ric Wheeler
2012-07-04 13:25 ` ext4_fallocate Zheng Liu
2012-06-26 13:06 ` ext4_fallocate Eric Sandeen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FEB2338.9080008@redhat.com \
--to=sandeen@redhat.com \
--cc=adilger@dilger.ca \
--cc=fjohnber@zoho.com \
--cc=linux-ext4@vger.kernel.org \
--cc=ricwheeler@gmail.com \
--cc=rwheeler@redhat.com \
--cc=tytso@mit.edu \
--cc=wenqing.lz@taobao.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).