linux-ext4.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Sandeen <sandeen@redhat.com>
To: Dave Chinner <david@fromorbit.com>
Cc: "Ryan Wang" <openspace.wang@gmail.com>,
	"Theodore Ts'o" <tytso@mit.edu>,
	"Lukáš Czerner" <lczerner@redhat.com>,
	linux-ext4@vger.kernel.org, xfs@oss.sgi.com
Subject: Re: How to run xfstests against multipath disks on SuSE?
Date: Tue, 27 Nov 2012 14:37:09 -0600	[thread overview]
Message-ID: <50B52475.1020603@redhat.com> (raw)
In-Reply-To: <20121127203537.GM6434@dastard>

On 11/27/12 2:35 PM, Dave Chinner wrote:
> On Tue, Nov 27, 2012 at 11:08:30AM -0600, Eric Sandeen wrote:
>> On 11/26/12 9:14 PM, Dave Chinner wrote:
>>> On Tue, Nov 27, 2012 at 09:20:47AM +0800, Ryan Wang wrote:
>>>> 2012/11/26 Theodore Ts'o <tytso@mit.edu>:
>>>>> On Mon, Nov 26, 2012 at 02:43:40PM +0100, Lukáš Czerner wrote:
>>>>>>> The I checked the script common.rc, and found that it uses
>>>>>>> df to determine the filesystem type and it uses the realpath
>>>>>>> "/dev/dm-0" instead of "/dev/mapper/mpatha", while df always
>>>>>>> shows "devtmpfs" instead of "ext4" for /dev/dm-0.
>>>>>>>
>>>>>>> I run "mount" and found that devtmpfs is mount on /dev/ on opensuse
>>>>>>> ***by default***. Even though  I run "mount -t btrfs /dev/dm-0 /somedir",
>>>>>>> df still showed devtmpfs.
>>>>>>>
>>>>>>> Any ideas to kick off the xfstests?
>>>>>
>>>>> At least with the df which ships with Debian Testing, df will display
>>>>> the file system in use if it matches the device name which is
>>>>> /etc/mtab.  It looks the issue is that mount is canonicalizing the
>>>>> device name to be the human friendly version:
>>>>>
>>>>> # ls -l /dev/mapper/closure-bigscratch
>>>>> 0 lrwxrwxrwx 1 root root 7 Nov 16 15:15 /dev/mapper/closure-bigscratch -> ../dm-7
>>>>> <tytso.root@closure> {/home/tytso/bin}, level 2
>>>>> # mount /dev/dm-7 /u2
>>>>> # df /u2
>>>>> Filesystem                     1K-blocks   Used Available Use% Mounted on
>>>>> /dev/mapper/closure-bigscratch  52403200 224772  52178428   1% /u2
>>>>> # grep /u2 /etc/mtab
>>>>> /dev/mapper/closure-bigscratch /u2 xfs rw,relatime,attr2,inode64,noquota 0 0
>>>>>
>>>>> So the simplest solution is to just use /dev/mapper/mpatha instead of
>>>>> insisting on using /dev/dm-0.  That's what I do....
>>>>
>>>> In xfstests/common.rc, it will use realpath to obtain /dev/dm-0, even if you
>>>> specified /dev/mapper/mpatha.
>>>> My problem is in SuSE, the devtmpfs is mounted on /dev by default, seems
>>>> used by udev. And df reports devtmpfs on /dev/dm-0, instead of ext4.
>>>
>>> What version of xfstests are you using? Do you have a
>>> "README.device-mapper" file in the base directory? If not, upgrade
>>> to the latest version and retry.
>>>
>>> $ gl -n 1 -p 0a81886
>>> commit 0a818862bb74932e15971ec8bedb55765ec3a3f6
>>> Author: Christoph Hellwig <hch@lst.de>
>>> Date:   Wed May 4 16:28:32 2011 +0200
>>>
>>>     xfstests: support post-udev device mapper nodes
>>>
>>>     Because of udevs complaining device mapper now creates /dev/dm-N as the real
>>>     device nodes, and just symlinks the /dev/mapper/ names to it.  This would be
>>>     easy if everything used the /dev/mapper clear names, but most system utilities
>>>     translate them back to the /dev/mapper/ names and thus confuse various test
>>>     cases.  Add support to _is_block_dev to read symlinks, and add documentation
>>>     on how to run xfstests on device mapper volumes.
>>>
>>>     Signed-off-by: Christoph Hellwig <hch@lst.de>
>>>     Reviewed-by: Alex Elder <aelder@sgi.com>
>>>
>>> Cheers,
>>>
>>> Dave.
>>>
>>
>> Recent "realpath" changes also went in:
>>
>> b03c662399956609934ff063e9064e15dc7459ac xfstests: fix to build src/realpath and the correct the existence of target devices
>> d5ea873fcbf00b841f0511a26fb341364a5c6425 xfstests: resolve symlinked devices to real paths
>>
>> so either of those could have broken and/or fixed it for you :)
> 
> Yup, those are almost certainly the patches that broke device mapper
> support. There' aren't changes to common.rc, so I didn't notice them.
> They basically override the fix that Christoph made to support
> /dev/mapper links properly.
> 
> I'd suggest a revert is in order, the two patches above were part
> of Rich's hovering of old, unreviewed patches. This problem was
> already fixed in a different way by Christoph, so adding these
> patches was wrong.

Fine with me ...

Ryan, can you test w/o those, and if it works -

Rich, can you revert those please?

-Eric

> Cheers,
> 
> Dave.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2012-11-27 20:37 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-26  0:00 How to run xfstests against multipath disks on SuSE? Ryan Wang
2012-11-26 13:43 ` Lukáš Czerner
2012-11-26 14:55   ` Theodore Ts'o
2012-11-27  1:20     ` Ryan Wang
2012-11-27  3:14       ` Dave Chinner
2012-11-27 17:08         ` Eric Sandeen
2012-11-27 20:35           ` Dave Chinner
2012-11-27 20:37             ` Eric Sandeen [this message]
2012-11-27 20:55               ` Rich Johnston

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=50B52475.1020603@redhat.com \
    --to=sandeen@redhat.com \
    --cc=david@fromorbit.com \
    --cc=lczerner@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=openspace.wang@gmail.com \
    --cc=tytso@mit.edu \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).