Re: convert from ext3 versus fresh format

[Andreas Dilger <adilger@dilger.ca>]

On 2010-11-28, at 14:16, linux_ext4@proinbox.com wrote:
> I have a production system installed on an SSD, whose installer formats
> the target drive as ext3 automatically. I've since learned that ext4 is
> more suited for use on SSDs and am considering an upgrade to ext4.
> 
> I see the procedure on how to convert from ext3 to ext4 on the wiki, and
> before I proceed would like to know whether there's an advantage to
> formatting as ext4 from the start as opposed to converting after an ext3
> format.

It is possible to use the ext4 filesystem code on ext3-formatted filesystems without any conversion being done.  Enabling extents will improve performance, and uninit_bg will improve e2fsck performance.

You wouldn't be able to take advantage of flex_bg without reformatting (or some significant surgery to resize2fs).

If the inodes are "large" (256 bytes) then mounting the filesystem with ext4 will allow the inodes to use nanosecond timestamps.

> In the case that there is a difference, what exactly is sacrificed in
> choosing one over the other?

Reformatting and reinstalling and/or restoring from backup into an ext4-formatted filesystem will allow using a few of the features lay out the files with extents, and reduce the metadata overhead.  There will be some performance benefits, but I don't think it will necessarily be dramatic.

Cheers, Andreas