From: "Lukáš Czerner" <lczerner@redhat.com>
To: Andrey Tsyvarev <tsyvarev@ispras.ru>
Cc: "Theodore Ts'o" <tytso@mit.edu>,
Andreas Dilger <adilger.kernel@dilger.ca>,
linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org,
Alexey Khoroshilov <khoroshilov@ispras.ru>
Subject: Re: [PATCH] ext4: Do not destroy ext4_groupinfo_caches if ext4_mb_init() fails
Date: Tue, 13 May 2014 12:25:23 +0200 (CEST) [thread overview]
Message-ID: <alpine.LFD.2.00.1405131223410.2070@localhost.localdomain> (raw)
In-Reply-To: <5371F135.7040409@ispras.ru>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 3272 bytes --]
On Tue, 13 May 2014, Andrey Tsyvarev wrote:
> Date: Tue, 13 May 2014 14:17:25 +0400
> From: Andrey Tsyvarev <tsyvarev@ispras.ru>
> To: Lukáš Czerner <lczerner@redhat.com>
> Cc: Theodore Ts'o <tytso@mit.edu>, Andreas Dilger <adilger.kernel@dilger.ca>,
> linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org,
> Alexey Khoroshilov <khoroshilov@ispras.ru>
> Subject: Re: [PATCH] ext4: Do not destroy ext4_groupinfo_caches if
> ext4_mb_init() fails
>
>
> 12.05.2014 19:08, Lukáš Czerner пишет:
> > On Mon, 12 May 2014, Andrey Tsyvarev wrote:
> >
> > > Date: Mon, 12 May 2014 12:23:59 +0400
> > > From: Andrey Tsyvarev<tsyvarev@ispras.ru>
> > > To: Theodore Ts'o<tytso@mit.edu>
> > > Cc: Andrey Tsyvarev<tsyvarev@ispras.ru>,
> > > Andreas Dilger<adilger.kernel@dilger.ca>,linux-ext4@vger.kernel.org,
> > > linux-kernel@vger.kernel.org, Alexey
> > > Khoroshilov<khoroshilov@ispras.ru>
> > > Subject: [PATCH] ext4: Do not destroy ext4_groupinfo_caches if
> > > ext4_mb_init()
> > > fails
> > >
> > > Caches from 'ext4_groupinfo_caches' may be in use by other mounts, which
> > > have already existed.
> > > So, it is incorrect to destroy them when newly requested mount fails.
> > >
> > > Found by Linux File System Verification project (linuxtesting.org).
> > Makes sense, thanks! Can you please share the test case which
> > triggered this ? It might be worth including in xfstests.
>
> Actually it was triggered by xfstests themselves but run with fault
> simulation.
> The method of fault simulation is under development/evaluation now, we expect
> to publish a paper describing it in the near future.
>
> BUG_ON() in get_groupinfo_cache() was firstly triggered by test generic/003,
> but actually it could be any other test, which uses a scratch device: xftests
> itself requires test device(TEST_DEV) mounted, so a fault simulated while
> mount scratch device causes the problem described.
It sounds interesting. I hope that you'll send the information out
to the fsdevel list when your paper is finished, It looks like it
might be quite useful.
Thanks!
-Lukas
>
>
> > Reviewed-by: Lukas Czerner<lczerner@redhat.com>
> >
> > > Signed-off-by: Andrey Tsyvarev<tsyvarev@ispras.ru>
> > > ---
> > > fs/ext4/mballoc.c | 4 +---
> > > 1 file changed, 1 insertion(+), 3 deletions(-)
> > >
> > > diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> > > index 04a5c75..becea1d 100644
> > > --- a/fs/ext4/mballoc.c
> > > +++ b/fs/ext4/mballoc.c
> > > @@ -2607,7 +2607,7 @@ int ext4_mb_init(struct super_block *sb)
> > > sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
> > > if (sbi->s_locality_groups == NULL) {
> > > ret = -ENOMEM;
> > > - goto out_free_groupinfo_slab;
> > > + goto out;
> > > }
> > > for_each_possible_cpu(i) {
> > > struct ext4_locality_group *lg;
> > > @@ -2632,8 +2632,6 @@ int ext4_mb_init(struct super_block *sb)
> > > out_free_locality_groups:
> > > free_percpu(sbi->s_locality_groups);
> > > sbi->s_locality_groups = NULL;
> > > -out_free_groupinfo_slab:
> > > - ext4_groupinfo_destroy_slabs();
> > > out:
> > > kfree(sbi->s_mb_offsets);
> > > sbi->s_mb_offsets = NULL;
> > >
>
> --
> Andrey Tsyvarev
> Linux Verification Center, ISPRAS
>
>
prev parent reply other threads:[~2014-05-13 10:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 8:23 [PATCH] ext4: Do not destroy ext4_groupinfo_caches if ext4_mb_init() fails Andrey Tsyvarev
2014-05-12 15:08 ` Lukáš Czerner
2014-05-12 16:49 ` Theodore Ts'o
2014-05-13 10:17 ` Andrey Tsyvarev
2014-05-13 10:25 ` Lukáš Czerner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.00.1405131223410.2070@localhost.localdomain \
--to=lczerner@redhat.com \
--cc=adilger.kernel@dilger.ca \
--cc=khoroshilov@ispras.ru \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tsyvarev@ispras.ru \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox